Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 3 FirstFirst 123
Results 21 to 26 of 26

Thread: GA-EP45-DS3P - BSOD/Stability problems




  1. #21
    Join Date
    Nov 2009
    Location
    Stafford
    Posts
    16

    Default Re: GA-EP45-DS3P - BSOD/Stability problems

    Hi,

    An update.

    CPU Vcore shows 1.25000V I have it set to 1.375000V
    PL set manually now to 1.580V (1.570 not an option)
    MCH Core set to 1.240V (I set it high, but not sure it needs to be that high)
    CPU Termination set manually to 1.200V (as displayed as default)

    Will run Prime tonight and check temps.
    and post these up ASAP.
    Will add CPU-Z file also.

    Thanks,

    Dave

  2. #22
    Join Date
    Nov 2009
    Location
    Stafford
    Posts
    16

    Default Re: GA-EP45-DS3P - BSOD/Stability problems

    CoreTemp under Prime load.

  3. #23
    Join Date
    Nov 2009
    Location
    Stafford
    Posts
    16

    Default Re: GA-EP45-DS3P - BSOD/Stability problems

    CPU-Z 1.49 report file

    Processor(s)
    Number of processors 1
    Number of cores 4 per processor
    Number of threads 4 per processor
    Name Intel Core 2 Quad Q6700
    Code Name Kentsfield
    Specification Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz
    Package Socket 775 LGA
    Family/Model/Stepping 6.F.B
    Extended Family/Model 6.F
    Core Stepping G0
    Technology 65 nm
    Core Speed 3330.1 MHz
    Multiplier x Bus speed 10.0 x 333.0 MHz
    Rated Bus speed 1332.0 MHz
    Stock frequency 2666 MHz
    Instruction sets MMX, SSE, SSE2, SSE3, SSSE3, EM64T
    L1 Data cache (per processor) 4 x 32 KBytes, 8-way set associative, 64-byte line size
    L1 Instruction cache (per processor) 4 x 32 KBytes, 8-way set associative, 64-byte line size
    L2 cache (per processor) 2 x 4096 KBytes, 16-way set associative, 64-byte line size
    Chipset & Memory
    Northbridge Intel P45/P43 rev. A3
    Southbridge Intel 82801JR (ICH10R) rev. 00
    Graphic Interface PCI-Express
    PCI-E Link Width x16
    PCI-E Max Link Width x16
    Memory Type DDR2
    Memory Size 8192 MBytes
    Memory Frequency 399.6 MHz (5:6)
    CAS# Latency (tCL) 4.0 clocks
    RAS# to CAS# (tRCD) 4 clocks
    RAS# Precharge (tRP) 4 clocks
    Cycle Time (tRAS) 12 clocks
    Command Rate (CR) 2T
    System
    System Manufacturer Gigabyte Technology Co., Ltd.
    System Name EP45-DS3P
    System S/N
    Mainboard Vendor Gigabyte Technology Co., Ltd.
    Mainboard Model EP45-DS3P
    BIOS Vendor Award Software International, Inc.
    BIOS Version F9c
    BIOS Date 09/03/2009
    Memory SPD
    Module 1 DDR2, PC2-6400 (400 MHz), 2048 MBytes, Kingston
    Module 2 DDR2, PC2-6400 (400 MHz), 2048 MBytes, Kingston
    Module 3 DDR2, PC2-6400 (400 MHz), 2048 MBytes, Kingston
    Module 4 DDR2, PC2-6400 (400 MHz), 2048 MBytes, Kingston
    Software
    Windows Version Microsoft Windows Vista (6.1) Ultimate Edition (Build 7600)
    DirectX Version 10.0

  4. #24
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: GA-EP45-DS3P - BSOD/Stability problems

    Core temps look fine. Let Prime95 run for 8+ hours and I think you can call it stable if it pass.

    You can try to run IBT if you like, max stress for 5-10 runs. Note that temps may be 10c or more higher than Prime95. Estimate GFlops would be somewhere between 40 and 44, if they are much lower a little more Vcore may be needed.

    Don't forget to save a BIOS profile (F11 in main BIOS window).
    Then you can decide if you satisfied or want to try DDR-1066 afain, or highr FSB with or without higher CPU OC.

  5. #25
    Join Date
    Nov 2009
    Location
    Stafford
    Posts
    16

    Default Re: GA-EP45-DS3P - BSOD/Stability problems

    Thanks for all of your advice and pointers will let it run under load today.

    Will update.

    Once again, cheers I've gone from a unstable machine to a computer which is not only stable but faster than stock!

    Dave

  6. #26
    Join Date
    Nov 2009
    Location
    Stafford
    Posts
    16

    Smile Re: GA-EP45-DS3P - BSOD/Stability problems

    Core temp after 4 hours with Prime on blend.

    Settings as previous post.

    Cheers
    Dave

Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •