Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 5 FirstFirst 1234 ... LastLast
Results 11 to 20 of 45

Thread: EasyTune 6 doesn't open




  1. #11
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: EasyTune 6 doesn't open

    .NET 3.5.1 should be installed by default on Windows 7. However as with anything els it can I suppose become corrupt. You can try to reinstall it by going to Control Panel > Programs and Features > Turn Windows features on and off, uncheck .NET, ckick OK to remove it, then go back and re tick the box to do a re-install. Note that you may need to have your Windows disk to hand to re-install it.
    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

  2. #12
    Join Date
    Apr 2009
    Posts
    17

    Default Re: EasyTune 6 doesn't open

    i'm using f3c BIOS and fresh windows 7 64 bit

    ET6 working normal here

    do you install with overclocked hardware?

  3. #13
    ed1 is offline Member
    Join Date
    Aug 2008
    Location
    US
    Posts
    155

    Default Re: EasyTune 6 doesn't open

    No, I did not install Windows with overclocked hardware. But I may have installed ET6 after an initial round of overclocking.

  4. #14
    ed1 is offline Member
    Join Date
    Aug 2008
    Location
    US
    Posts
    155

    Default Re: EasyTune 6 doesn't open

    I just went to the Windows features menu, turned on a couple of .net 3.5.1 subfeatures (http and non-http communications) and reinstalled ET6.

    Same error message window opens: "Could not load the device driver." That's all it says.

    I am wondering if the problem is in any way related to my system having Windows 7 64-bit on an SSD drive.

  5. #15
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: EasyTune 6 doesn't open

    I have Windows 7 x64 and two SSD's one boot and one games with no issues. It's almost certainly a motherboard and or BIOS issue. You may find, drastic as it sounds that a Windows install from scratch may also help. I hardly ever recommend it as it's pretty major, but it would eliminate any external factors such as missing or corrupt drivers and system files.

    Maybe first, try running sfc /scannow from an administrator cmd prompt (must right click cmd and hit run as admin, even if your account is an admin). This will check all files that are important and replace the corrupt ones if any are found. You will need the install CD if it finds any errors or incorrect versions so that it can replace them with a good copy.
    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

  6. #16
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EasyTune 6 doesn't open

    I would suggest a clean install now as well, as I asked and a few other people have also informed me they are using F3c and this board and have no issues installing or using EasyTune.

    Overclocking would not matter to easytune, something else is wrong on the software side of things. A clean install would be much easier than trying to narrow down what driver or program is causing this, or whatever else the problem might be.

  7. #17
    Join Date
    Dec 2009
    Location
    Bulgaria
    Posts
    1

    Default Re: EasyTune 6 doesn't open

    The same sh*t here. I am with clean install of windows 7 64bit (not on C) but the latest Easy Tune 6 doesn't start at all. No error mesages, no driver missing, nothing. This is my first Gigabyte bord after many years and I am very disappointed to discover that the software is still not working like 8-9 years ago. I am using the latest BIOS f3g. I hope that "Easy Tune 6" problem will find solution soon. I would suggest to NOT waste your time with re-installation of the OS .
    Last edited by dolf; 12-22-2009 at 05:25 AM.

  8. #18
    Join Date
    Dec 2009
    Location
    New York
    Posts
    12

    Default Re: EasyTune 6 doesn't open

    I get the same problem. Error that a driver didn't install and my mobo is the UD3R rev.1.6 using the FB bios.

  9. #19
    Join Date
    Dec 2009
    Location
    New York
    Posts
    12

    Default Re: EasyTune 6 doesn't open

    It actually does run though. After it gives the driver didn't load error, just right click the ET6 icon in taskbar and select show and easytune opens. I don't use this for anything other than to check what im seeing in CPU-Z but it does open. Would be nice to eliminate that error message though.

  10. #20
    Join Date
    Apr 2009
    Location
    J'Habite En Angleterre
    Posts
    2,431

    Default Re: EasyTune 6 doesn't open

    I understand that people are frustrated, but to be honest, ET6 is actually pretty useless. CPU-Z is a much more reliable tool, so I would use that for basic CPUID use. Certainly don't use ET6 to check CPU-Z with.

    As far as ET6's other functions, I wouldn't particularly recommend you use them anyway. Speedfan can be used to control fans and monitor current board, CPU and CPU Core temperatures and is much more versatile than ET6, as well as being nicer to look at. ET6 looks dated.

    Definitely stay away from its overclocking features too. The only reason to go to that section using |ET6 would be to see what voltages you have set in the BIOS. I'd never use it to change them. OC in the BIOS. There is the inconvenience that if you need to post settings here then you'll have to reboot to write them down rather than take a screenshot of the Advanced > Voltages tab, but that's no real hassle, it takes about 2 minutes. Most people should be able to memorize a lot of BIOS settings too. I know every tweak and setting needed for this rig at 3.9GHz, 3.8GHz, 3.6GHz and stock 2.8GHz.

    I can't help further with the missing driver or the complete failure to start because ET6 has always worked for me. It's running fine on this current install of Windows 7 Home Premium 64bit, it also runs on XP 323bit on the same rig. Having built systems based on the newer UD3P/R 1.6, I can confirm that ET6 worked on them too with a standard Vista 64bit/Windows 7 64bit install, no tweaking needed on Win 7, just a .net update needed for Vista or simply installed SP2.
    Coolermaster CM 690 II advance Case
    Corsair HX750 (CWT, 91%(80+ Gold rated @230V) single 62A 12V rail
    P55A-UD4 v2.0 @ F14
    Core i5 760 @ 20 x 201, 4.02GHz
    TRUE Black with a single Noctua NF-P12 pumping out 55 CFM @ 19db .
    2 x 2GB Mushkin Ridgeback (996902), @ 7-10-8-27, 2010-DDR, 1.66v
    2 x Gigabyte GTX 460 1024MB in SLI (Pre OC'd to 715MHz core and 1800MHz VRAM) @ 850 Core / 4100 Mem.
    Intel X25-M Boot Drive (OS and Programs) 200MB/s Read & 90MB/s Write
    Corsair X32 200MB/s Read & 100MB/s Write
    WD Caviar Blue 640GB C (Steam, Games, Storage, Temp Files & Folders, etc)
    Samsung F3 500GB Backup/Images
    Noctua 1300RPM 19dB case fan (rear extraction)
    3 x 140 MM Coolermaster LED fans (one front intake, one top extraction, one side intake)
    Dell Ultra Sharp 2209WAf E-IPS @ 1680x1050

Page 2 of 5 FirstFirst 1234 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •