Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: MA785GMT-UD2H Issue




  1. #1
    Join Date
    Dec 2009
    Location
    LA
    Posts
    6

    Exclamation MA785GMT-UD2H Issue

    I just bought the brand new Gigabyte MA785GMT-UD2H, CPU AMD X4 965 and Power Supply 600watt from yesterday. I put all the part all together and plus everythings right, when i turn it on the monitor show me OFF MODE IN 5 SECOND. I cant even get into BIOS or anything. Is anyone here can help me with this problem

  2. #2
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: MA785GMT-UD2H Issue

    Does it look like it starts up?
    which port do you connect the monitor to?

  3. #3
    Join Date
    Dec 2009
    Location
    LA
    Posts
    6

    Default Re: MA785GMT-UD2H Issue

    i plus in video card and try onboard too it doest work

  4. #4
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: MA785GMT-UD2H Issue

    Which port the D-Sub or DVI-D? And what kind of cable do you use?

  5. #5
    Join Date
    Dec 2009
    Location
    LA
    Posts
    6

    Default Re: MA785GMT-UD2H Issue

    DVI i had tried on diff monitor and diff case it doesnt work at all it happen to my Intel be4 thats why i bought this new AMD and it happen again so i dont know why

  6. #6
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: MA785GMT-UD2H Issue

    When you have a no P.O.S.T. Just before sending the motherboard back you will want to remove the motherboard from the case and perform a P.O.S.T. bench test to it.
    Instructions as follows.
    Please follow the following simple steps.
    1. Remove the motherboard from the case and any trays or chassies.
    2. Place the motherboard on top of the cardboard box (you can use the motherboard box)
    3. Install the CPU, CPU fan, Memory, Power supply plugs (plug the 1 X 20 pin and 1 X 4 or 2 X 8 pin from the power supply unit) and a good working video card.
    4. Hook the monitor to the video card and be sure the monitor is switched on.
    5. Turn on the system board by using the case "Power on" switch.
    6. If the system fails to POST, check the components' insertion again to ensure they are all connected properly.
    Then RMA. This may save you some time and S&H charges if it is a short from the case.
    Last edited by artdrivers; 12-22-2009 at 03:05 AM.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  7. #7
    Join Date
    Dec 2009
    Location
    LA
    Posts
    6

    Default Re: MA785GMT-UD2H Issue

    Quote Originally Posted by artdrivers View Post
    When you have a no P.O.S.T. Just before sending the motherboard back you will want to remove the motherboard from the case and perform a P.O.S.T. bench test to it.
    Instructions as follows.
    Please follow the following simple steps.
    1. Remove the motherboard from the case and any trays or chassies.
    2. Place the motherboard on top of the cardboard box (you can use the motherboard box)
    3. Install the CPU, CPU fan, Memory, Power supply plugs (plug the 1 X 20 pin and 1 X 4 or 2 X 8 pin from the power supply unit) and a good working video card.
    4. Hook the monitor to the video card and be sure the monitor is switched on.
    5. Turn on the system board by using the case "Power on" switch.
    6. If the system fails to POST, check the components' insertion again to ensure they are all connected properly.
    Then RMA. This may save you some time and S&H charges if it is a short from the case.
    i had tried that still doesnt work with the Intel and AMD motherboard...i really dont get it why is that

  8. #8
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: MA785GMT-UD2H Issue

    Everything can't be right. You have a bad connection or part somewhere. You may want to try swapping out parts untill you find it, or take it to a repair shop if you don't have spare parts to exchange.
    Last edited by artdrivers; 12-22-2009 at 03:30 AM.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  9. #9
    Join Date
    Dec 2009
    Location
    LA
    Posts
    6

    Default Re: MA785GMT-UD2H Issue

    Quote Originally Posted by artdrivers View Post
    Everything can't be right. You have a bad connection or part somewhere. You may want to try swapping out parts untill you find it, or take it to a repair shop if you don't have spare parts to exchange.
    i checked everythings cables memory cpu and video card everything are connect it right maybe the case wire problem?

  10. #10
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: MA785GMT-UD2H Issue

    Check the switches on the power supply.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •