Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: GA-EP45-UD3R Q6600 Overclock (System Stops responding)




  1. #11
    Join Date
    Dec 2009
    Location
    Milwaukee, WI
    Posts
    11

    Default Re: GA-EP45-UD3R Q6600 Overclock (System Stops responding)

    After an hour of torture test (Large FFTs) I reach 59 degrees for max. Mins seemed to have dropped too. Here is the screenshot.

    Rig
    Gigabyte - GA-EP45-UD3R
    Intel Q6600 - G0 @ 3.2Ghz 8x400 @ 1.3625V
    ZALMAN CNPS9500 w/ Arctic Silver 5
    4x2GB OCZ Reaper DDR2 @ 1066 5-5-5-15 2.1V
    CORSAIR CMPSU-1000HX 1000W
    EVGA GeForce GTX 285 SSC Edition 1GB (Stock)

  2. #12
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: GA-EP45-UD3R Q6600 Overclock (System Stops responding)

    7c not bad at all, may be enough to get 3.3-3.4GHz, that is if ou want to.
    Id Fine CPU Clock Ratio available for this CPU?

  3. #13
    Join Date
    Dec 2009
    Location
    Milwaukee, WI
    Posts
    11

    Default Re: GA-EP45-UD3R Q6600 Overclock (System Stops responding)

    It shows as an option in the BIOS...what does that do? I have been running for over 12 hours now for large FFT and I never hit above 62. I also believe I can step down the voltage 1 step...which would reduce heat...but I am going to wait to check that out.

    Thanks for the help so far Chike...

    From what I have read that is only available on 45nm CPU's I have a 65nm.
    Last edited by USAFdude02; 01-03-2010 at 03:03 AM. Reason: Add info.
    Rig
    Gigabyte - GA-EP45-UD3R
    Intel Q6600 - G0 @ 3.2Ghz 8x400 @ 1.3625V
    ZALMAN CNPS9500 w/ Arctic Silver 5
    4x2GB OCZ Reaper DDR2 @ 1066 5-5-5-15 2.1V
    CORSAIR CMPSU-1000HX 1000W
    EVGA GeForce GTX 285 SSC Edition 1GB (Stock)

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •