Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: GA-EX58-UD3R + 2000Mhz ram config advice




  1. #1

    Default GA-EX58-UD3R + 2000Mhz ram config advice

    Hi guys,
    I would like to request some assistance for finding the best bios configuration for this system:

    Core i7 920 (Rev D0)
    GA-EX58-UD3R Rev: 1.6 Bios: FB, Stock HSF
    Kingston HyperX Ram 2000Mhz 9-9-9-27-1T (http://www.valueram.com/datasheets/K...D3T1K2_4GX.pdf)
    PowerColour Radeon HD5870
    TT SopranoRS Mid tower chasis.
    Corsair 650watt PSU

    I have done some novice/basic bios configuration so far to get the system to run stable enough to install the OS.

    But when the system is Prime blended, or SuperPi'd (32Million), after about 10 minutes of either, the whole display just goes light blue.. something certainly is unstable :(

    Please review the current template and please advise me on the best settings to help the system run stock and stable.

    Code:
    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Enabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Enabled]
    Virtualization Technology ................... [Enabled] << Disabled if you do not use Vmware or Virtual PC Programs
    Bi-Directional PROCHOT ..................... [Enabled]
    
    
    Uncore & QPI Features:
    QPI Link Speed .............................. [Auto] - 4.8Ghz
    Uncore Frequency ..........................  [Auto] - 3733Mhz
    Isonchronous Frequency ..................[Enabled]
    
    
    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Disabled]
    BCLK Frequency (MHz) .....................133
    PCI Express Frequency (MHz) ........... [Auto]
    
    C.I.A.2 [Disabled] < disabled
    
    Advanced Clock Control:
    CPU Clock Drive ..............................[700mV]
    PCI Express Clock Drive ................... [700mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
    
    
    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Profile2]
    Note:
    Profile 1, runs the system at a different BCLK and Multi whilst running the Ram at 2002Mhz, running the uncore above 4GHZ, it is not stable at all.
    Profile 2, runs the ram at 1867mhz, and runs the uncore, bclk and multi all as listed in this template.
    
    System Memory Multiplier (SPD) ........ [AUTO]
    DRAM Timing Selectable (SPD) .......... [AUTO]
    
    Channel A + B + C
    
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ...................... 9
    tRCD ....................................... 9
    tRP ......................................... 9
    tRAS ....................................... 27
    
    Below values may be left in Auto if you like, generally this is fine.  For those users who DO Set advanced timings manually, please see some of my thoughts and findings about these settings and rules here
    XtremeSystems Forums - View Single Post - Gigabyte EX58-UD5/Extreme Discussion Thread
    
    ##Channel A Advanced Timing Control##
    tRC ........................................  42
    tRRD ....................................... 7
    tWTR ...................................... 7
    tWR ........................................ 14
    tWTP ....................................... 25
    tWL ........................................  7
    tRFC ....................................... 70
    tRTP ....................................... 7
    tFAW ...................................... 28
    Command Rate (CMD) ................ 1
    
    ##Channel A Misc Timing Control##
    Round Trip Latency ................... 61
    
    
    
    Advanced Voltage Control:
    
    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ............................... [AUTO] - 1.25625V
    QPI/VTT Voltage 1.150v ............ [AUTO] - 1.175V
    CPU PLL 1.800v ....................... [AUTO] - 1.800V
    
    MCH/ICH
    PCIE 1.500v ........................... [AUTO] - 1.500V
    QPI PLL 1.100v ....................... [AUTO] - 1.100V
    IOH Core 1.100v ..................... [AUTO] - 1.100V
    ICH I/O 1.500v ....................... [AUTO] - 1.500V
    ICH Core 1.1v ........................ [AUTO] - 1.100V
    
    DRAM
    DRAM Voltage 1.500v ..............  [AUTO] - 1.500V
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]
    PC Health Voltages and temps:
    Code:
    Vcore.........................................1.236V - 1.252V
    DDR15V......................................1.664V
    +3.3V.........................................3.360V
    +5V............................................5.107V
    +12V..........................................12.112V  - 12.175V
    Sys temp....................................42C
    CPU temp....................................43C
    MCH temp....................................42C
    CPU HSF RPM................................1917RPM
    Ultimately I would really love to get this system stable, running the CPU at 2.66GHZ and the ram at its rated 2000MHZ, but if it can be configured to run rock stable with the ram at to 18xxMHZ, that would be just as awesome IMHO.


    Thank you for reading, kind regards.
    qwertylesh
    Last edited by qwertylesh; 01-15-2010 at 12:06 PM. Reason: typo's
    Gaming: GIGABYTE X58-UD5 - i7 920 C0 - Noctua NH-U12P - 6GB OCZ Platinum PC3-10666 CL7 - Sapphire HD5870 - Antec P182 - TruePower Trio 650w - 3 Acer X243HB in Eyefinity - 2 x 500GB ST3500320AS 7200.11, SD1A - MS Digital Media KB - Windows 7 Ultimate x64

    Server: - HP Proliant MicroServer N36L - 4GB Team 1333 CL9 - 1x 160 2.5 5400RPM - 2x 500GB ST3500320AS 7200.11, SD1A - 1x 250GB ST3500320AS 7200.12 - 1x 1.5TB ST3500320AS 7200.12

    HTPC1
    : GIGABYTE EP45-UD3L - E7600 - 2GB Corsair DHX 800 C5 - GIGABYTE 8500GT - Antec Fusion - Microsoft Comfort Wireless / Logitech MX1000 bt - Windows 7 Ultimate x64

    HTPC2
    : GIGABYTE 945GCMX-S2 - E6320 - 2GB Corsair DHX 800 C5 - GIGABYTE 7600GT - Antec Fusion - Windows 7 Ultimate x64


    HTPC3:
    GIGABYTE P35-DS4 - E6750 - 4GB OCZ System Elite 800 - GIGABYTE 8800GTX - TT Shark - Earthwatts 500w - DeNovo Mini - Windows 7 Ultimate x64

  2. #2
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: GA-EX58-UD3R + 2000Mhz ram config advice

    it says to run at 2000mhz @2.0v maybe you need to raise ram volts from 1.5,for stock clocks i would put cpu voltage on the normal setting,and raise qpi volts a little to 1.2000 to start with
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  3. #3

    Default Re: GA-EX58-UD3R + 2000Mhz ram config advice

    Thanks for the reply wazza, I acutally made a mistake yesterday though, sorry I pasted the wrong datasheet.
    The kit is i7 compatbile, its the 4GX kit

    heres the correct data sheet :)

    http://www.valueram.com/datasheets/K...D3T1K2_4GX.pdf

    i will update the OP.
    Gaming: GIGABYTE X58-UD5 - i7 920 C0 - Noctua NH-U12P - 6GB OCZ Platinum PC3-10666 CL7 - Sapphire HD5870 - Antec P182 - TruePower Trio 650w - 3 Acer X243HB in Eyefinity - 2 x 500GB ST3500320AS 7200.11, SD1A - MS Digital Media KB - Windows 7 Ultimate x64

    Server: - HP Proliant MicroServer N36L - 4GB Team 1333 CL9 - 1x 160 2.5 5400RPM - 2x 500GB ST3500320AS 7200.11, SD1A - 1x 250GB ST3500320AS 7200.12 - 1x 1.5TB ST3500320AS 7200.12

    HTPC1
    : GIGABYTE EP45-UD3L - E7600 - 2GB Corsair DHX 800 C5 - GIGABYTE 8500GT - Antec Fusion - Microsoft Comfort Wireless / Logitech MX1000 bt - Windows 7 Ultimate x64

    HTPC2
    : GIGABYTE 945GCMX-S2 - E6320 - 2GB Corsair DHX 800 C5 - GIGABYTE 7600GT - Antec Fusion - Windows 7 Ultimate x64


    HTPC3:
    GIGABYTE P35-DS4 - E6750 - 4GB OCZ System Elite 800 - GIGABYTE 8800GTX - TT Shark - Earthwatts 500w - DeNovo Mini - Windows 7 Ultimate x64

  4. #4
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: GA-EX58-UD3R + 2000Mhz ram config advice

    Quote Originally Posted by qwertylesh View Post
    Thanks for the reply wazza, I acutally made a mistake yesterday though, sorry I pasted the wrong datasheet.
    The kit is i7 compatbile, its the 4GX kit

    heres the correct data sheet :)

    http://www.valueram.com/datasheets/K...D3T1K2_4GX.pdf

    i will update the OP.
    just try what i said above and manually input timings and it says 2000mhz with 9-9-9 timings@1.65 v
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  5. #5

    Default Re: GA-EX58-UD3R + 2000Mhz ram config advice

    Unfortunately, applying optomised defaults, then entering those adjustments you've suggested just causes restart cycles at post. (which is fair enough, trying to get it to run at 2000mhz is very touchy, as ive discovered already.)

    Ive actually gotten a posting 2000mhz non xmp configuration.
    the problem is even with this configuration its still not stable, it still loses the display and locks up when loaded into the OS.

    I'll show the non xpm configuration which posts, maybe you can give some suggestions on improving its stability further at 2000mhz.



    Code:
    Advanced CPU Features:
    CPU Clock Ratio ................................ [18x] (2.53Ghz)
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Disabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Enabled] << Disabled if you do not use Vmware or Virtual PC Programs
    Bi-Directional PROCHOT ..................... [Enabled]
    
    
    Uncore & QPI Features:
    QPI Link Speed .............................. [x36] - 5.14Ghz
    Uncore Frequency ..........................  [x28] - 4004Mhz
    Isonchronous Frequency ..................[Enabled]
    
    
    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................143
    PCI Express Frequency (MHz) ........... [100]
    
    C.I.A.2 [Disabled] < disabled
    
    Advanced Clock Control:
    CPU Clock Drive ..............................[900mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
    
    
    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [14.0] (@ 2002MHZ)
    DRAM Timing Selectable (SPD) .......... [Quick]
    
    Channel A + B + C
    
    Channel A Timing Settings:
    ##Channel A Standard Timing Control
    CAS Latency Time ...................... 9
    tRCD ....................................... 9
    tRP ......................................... 9
    tRAS ....................................... 27
    
    ##Channel A Advanced Timing Control## (all A Advanced timing controls are on auto, except the command rate)
    tRC ........................................  27 
    tRRD ....................................... 4
    tWTR ...................................... 4
    tWR ........................................ 8
    tWTP ....................................... 19
    tWL ........................................  7
    tRFC ....................................... 60
    tRTP ....................................... 4
    tFAW ...................................... 16
    Command Rate (CMD) ................ 1
    
    ##Channel A Misc Timing Control##
    Round Trip Latency ................... 62
    
    
    
    Advanced Voltage Control:
    
    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ............................... [AUTO] - 1.11875V
    QPI/VTT Voltage 1.150v ............ [1.335v] 
    CPU PLL 1.800v ....................... [AUTO] - 1.800V
    
    MCH/ICH
    PCIE 1.500v ........................... [AUTO] - 1.500V
    QPI PLL 1.100v ....................... [1.200v]
    IOH Core 1.100v ..................... [1.240v]
    ICH I/O 1.500v ....................... [AUTO] - 1.500V
    ICH Core 1.1v ........................ [1.200v]
    
    DRAM
    DRAM Voltage 1.500v ..............  [1.660v]
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]
    Last edited by qwertylesh; 01-15-2010 at 07:47 AM.
    Gaming: GIGABYTE X58-UD5 - i7 920 C0 - Noctua NH-U12P - 6GB OCZ Platinum PC3-10666 CL7 - Sapphire HD5870 - Antec P182 - TruePower Trio 650w - 3 Acer X243HB in Eyefinity - 2 x 500GB ST3500320AS 7200.11, SD1A - MS Digital Media KB - Windows 7 Ultimate x64

    Server: - HP Proliant MicroServer N36L - 4GB Team 1333 CL9 - 1x 160 2.5 5400RPM - 2x 500GB ST3500320AS 7200.11, SD1A - 1x 250GB ST3500320AS 7200.12 - 1x 1.5TB ST3500320AS 7200.12

    HTPC1
    : GIGABYTE EP45-UD3L - E7600 - 2GB Corsair DHX 800 C5 - GIGABYTE 8500GT - Antec Fusion - Microsoft Comfort Wireless / Logitech MX1000 bt - Windows 7 Ultimate x64

    HTPC2
    : GIGABYTE 945GCMX-S2 - E6320 - 2GB Corsair DHX 800 C5 - GIGABYTE 7600GT - Antec Fusion - Windows 7 Ultimate x64


    HTPC3:
    GIGABYTE P35-DS4 - E6750 - 4GB OCZ System Elite 800 - GIGABYTE 8800GTX - TT Shark - Earthwatts 500w - DeNovo Mini - Windows 7 Ultimate x64

  6. #6
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: GA-EX58-UD3R + 2000Mhz ram config advice

    its mainly qpi voltage that you need to increase when you raise memory speed,i dont know how much youll need on a p55 board maybe try with 1.25000 youll need to raise one click at a time untill its stable,set system performance enhance to standard aswell
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  7. #7

    Default Re: GA-EX58-UD3R + 2000Mhz ram config advice

    ok thanks wazza, I'll start at the lowest safe voltage ranges with the above config and bump them gradually and see if the symptom goes away.

    peformance enhance to standard is always a must, as much as im lead to believe that using the Normal setting in the bios is bad for many different hardware combinations, especially high end ones.


    Edit:

    After further testing, I can't find a stable non xmp setting run to the ram at 2000mhz.
    I suspect the instability is QPI/vtt&pll & IOH voltage related, but am a little puzzled at why the display drops when it locksup

    Since I have a manual 1066Mhz configuration and a postable 2000Mhz configuration, what i'll do is print out both configurations, update the bios then create those two profiles again and do further configuration changes and tests with the 2000mhz dram non xmp config and see if i can improve the stability some more :)
    Last edited by qwertylesh; 01-15-2010 at 10:24 AM.
    Gaming: GIGABYTE X58-UD5 - i7 920 C0 - Noctua NH-U12P - 6GB OCZ Platinum PC3-10666 CL7 - Sapphire HD5870 - Antec P182 - TruePower Trio 650w - 3 Acer X243HB in Eyefinity - 2 x 500GB ST3500320AS 7200.11, SD1A - MS Digital Media KB - Windows 7 Ultimate x64

    Server: - HP Proliant MicroServer N36L - 4GB Team 1333 CL9 - 1x 160 2.5 5400RPM - 2x 500GB ST3500320AS 7200.11, SD1A - 1x 250GB ST3500320AS 7200.12 - 1x 1.5TB ST3500320AS 7200.12

    HTPC1
    : GIGABYTE EP45-UD3L - E7600 - 2GB Corsair DHX 800 C5 - GIGABYTE 8500GT - Antec Fusion - Microsoft Comfort Wireless / Logitech MX1000 bt - Windows 7 Ultimate x64

    HTPC2
    : GIGABYTE 945GCMX-S2 - E6320 - 2GB Corsair DHX 800 C5 - GIGABYTE 7600GT - Antec Fusion - Windows 7 Ultimate x64


    HTPC3:
    GIGABYTE P35-DS4 - E6750 - 4GB OCZ System Elite 800 - GIGABYTE 8800GTX - TT Shark - Earthwatts 500w - DeNovo Mini - Windows 7 Ultimate x64

  8. #8

    Default Re: GA-EX58-UD3R + 2000Mhz ram config advice

    OK, some good progress :D
    Since the bios update, i re-entered my 1066 and my 2000Mhz DRAM frequency bios profiles.
    the 1066 one is Flawless as it was on the previous FB bios, unfortunately the 2000Mhz non XMP set profile, has gotten far worse and now cannot even boot up into the OS.

    *BUT* Previously on the FB bios, Neither XMP profiles would run stable in the OS, both profiles would lockup and the display would go an oddly light blue in colour.

    NOW with the FE bios, the XMP Profile 1 (1866Mhz) combined with some sensible voltage settings and pci-e bus locking no longer suffers instability or display halting in windows.

    I've only prime blended it for 15 minutes so far (since I wanna change the HSF cos the stock one is poopy) but considering no config apart from the 1066 one would last more then a minute previously while priming, its an extremely good sign of stability (^_^)

    Once the HSF is changed, I'll see if it can stand a memtest and a SuperPi 32M, and if so then I can go about finding a lower QPI/VTT voltage (currently on the maximum safe level 1.335) and improve the temps.

    It looks like (to me) that 2000Mhz stable DRAM frequency is further out of reach now (without oc'ing the CPU dice) then what it was with the FB bios.

    Im pretty glad to get over 1600, ive read in the past how difficult it is to achieve +1600 dram frequencies on the 920 if you keep the 920 at stock processing speeds.

    maybe a more mature bios will improve stability, or it could just be the 920's IMC die is weak. I'll keep poking at it and see if i can hit 2000 stable on this setup, otherwise the 1866 will have to do :)
    Last edited by qwertylesh; 01-15-2010 at 01:21 PM.
    Gaming: GIGABYTE X58-UD5 - i7 920 C0 - Noctua NH-U12P - 6GB OCZ Platinum PC3-10666 CL7 - Sapphire HD5870 - Antec P182 - TruePower Trio 650w - 3 Acer X243HB in Eyefinity - 2 x 500GB ST3500320AS 7200.11, SD1A - MS Digital Media KB - Windows 7 Ultimate x64

    Server: - HP Proliant MicroServer N36L - 4GB Team 1333 CL9 - 1x 160 2.5 5400RPM - 2x 500GB ST3500320AS 7200.11, SD1A - 1x 250GB ST3500320AS 7200.12 - 1x 1.5TB ST3500320AS 7200.12

    HTPC1
    : GIGABYTE EP45-UD3L - E7600 - 2GB Corsair DHX 800 C5 - GIGABYTE 8500GT - Antec Fusion - Microsoft Comfort Wireless / Logitech MX1000 bt - Windows 7 Ultimate x64

    HTPC2
    : GIGABYTE 945GCMX-S2 - E6320 - 2GB Corsair DHX 800 C5 - GIGABYTE 7600GT - Antec Fusion - Windows 7 Ultimate x64


    HTPC3:
    GIGABYTE P35-DS4 - E6750 - 4GB OCZ System Elite 800 - GIGABYTE 8800GTX - TT Shark - Earthwatts 500w - DeNovo Mini - Windows 7 Ultimate x64

  9. #9
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: GA-EX58-UD3R + 2000Mhz ram config advice

    is it a p55 or a ud3 ex58 board? you might be able to lower qpi to 1.3000 thats what i use with 1800mhz ram you can use upto 1.5qpi on x58 board
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  10. #10

    Default Re: GA-EX58-UD3R + 2000Mhz ram config advice

    the topic clearly states that its a Tylersburg "X58".
    I never mention P55 Anywhere.
    Gaming: GIGABYTE X58-UD5 - i7 920 C0 - Noctua NH-U12P - 6GB OCZ Platinum PC3-10666 CL7 - Sapphire HD5870 - Antec P182 - TruePower Trio 650w - 3 Acer X243HB in Eyefinity - 2 x 500GB ST3500320AS 7200.11, SD1A - MS Digital Media KB - Windows 7 Ultimate x64

    Server: - HP Proliant MicroServer N36L - 4GB Team 1333 CL9 - 1x 160 2.5 5400RPM - 2x 500GB ST3500320AS 7200.11, SD1A - 1x 250GB ST3500320AS 7200.12 - 1x 1.5TB ST3500320AS 7200.12

    HTPC1
    : GIGABYTE EP45-UD3L - E7600 - 2GB Corsair DHX 800 C5 - GIGABYTE 8500GT - Antec Fusion - Microsoft Comfort Wireless / Logitech MX1000 bt - Windows 7 Ultimate x64

    HTPC2
    : GIGABYTE 945GCMX-S2 - E6320 - 2GB Corsair DHX 800 C5 - GIGABYTE 7600GT - Antec Fusion - Windows 7 Ultimate x64


    HTPC3:
    GIGABYTE P35-DS4 - E6750 - 4GB OCZ System Elite 800 - GIGABYTE 8800GTX - TT Shark - Earthwatts 500w - DeNovo Mini - Windows 7 Ultimate x64

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •