Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: Need help with OC (Gigabyte ep45-ud3p,e8400)




  1. #1
    Join Date
    Jan 2010
    Location
    Croatia
    Posts
    3

    Default Need help with OC (Gigabyte ep45-ud3p,e8400)

    Well,im new to OC-ing...I ve learned basics and succeded to get stable 4,42GHz but I want 4,5...xD
    I just want to get it stable...I dont think that vcore is problem cos I can boot it with higher FSB and low vcore but it fails prime 95...Even if I raise vcore alot it still fails prime95...

    my mit:


    N-means normal



    CPU =e8400
    Motherboard = ep45-ud3p
    BIOS Version = F4
    Ram = kingmax 1066Mhz

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster .............:fast
    CPU Clock Ratio .....................:8x
    Fine CPU Clock Ratio.................:+0,5
    CPU Frequency .......................:4,42Ghz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control...............:enabled
    CPU Host Frequency (Mhz) ............:520
    PCI Express Frequency (Mhz) .........:auto


    DRAM Performance Control
    Performance Enhance..................:standard
    Extreme Memory Profile (X.M.P.)......:i dont have that
    (G)MCH Frequency Latch...............:333
    System Memory Multiplier ............:2,40B
    Memory Frequency (Mhz) ..............:around 1066
    DRAM Timing Selectable ..............:manual

    Standard Timing Control
    CAS Latency Time.....................:6
    tRCD ................................:6
    tRP..................................:6
    tRAS.................................:18


    Advanced Timing Control
    tRRD.................................:3 auto
    tWTR.................................:3 auto
    tWR..................................:6 auto
    tRFC.................................:52auto
    tRTP.................................:3 auto
    Command Rate (CMD) ..................:0 auto


    Channel A
    Static tRead Value...................:9 auto
    Channel B
    Static tRead Value...................:9 auto


    Motherboard Voltage Control
    CPU
    Load Line Calibration (LLC) .........:enabled
    CPU Vcore............................:1,39375
    CPU Termination.....1.200V*..........:1,3
    CPU PLL.............1.500V*..........:1,59
    CPU Referen.........0.755V*..........:normal

    MCH/ICH
    MCH Core............1.100V...........:1,280
    MCH Reference.......0.800V...........:0,783
    MCH/DRAM Ref........0.900V...........:N
    ICH I/O.............1.500V...........:N
    ICH Core............1.100V...........:N

    DRAM
    DRAM Voltage .........1.800V.........:2,000V
    DRAM Termination .....0.900V.........:N
    Channel A Reference ..0.900V.........:N
    Channel B Reference ..0.900V.........:N

  2. #2
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Need help with OC (Gigabyte ep45-ud3p,e8400)

    Are you actually using the 2.4-B multiplier? That's almost DDR-1250.

  3. #3
    Join Date
    Jan 2010
    Location
    Croatia
    Posts
    3

    Default Re: Need help with OC (Gigabyte ep45-ud3p,e8400)

    edit:sorry,its on 2,0B
    my bad
    Last edited by dcesarec; 01-17-2010 at 04:28 AM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •