Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: GA-EP45T-UD3LR Rev. 1-BSOD




  1. #11
    Join Date
    Jan 2010
    Location
    US
    Posts
    13

    Default Re: GA-EP45T-UD3LR Rev. 1-BSOD

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------------- : [Auto]
    CPU Clock Ratio ---------------------- : [11x]
    Fine CPU Clock Ratio ----------------- : [0.0] <-- ignore if not available
    CPU Frequency ---------------------: 2.93-266 x 11 <-- this is set by your bios

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control --------------- : [disabled]
    CPU Host Frequency (Mhz) --------------: [266]
    PCI Express Frequency (Mhz) ---------- : [100] <--- Set to 100, never leave this on Auto

    C.I.A.2 ------------------------------ : [Disabled]

    Advanced Clock Control ------- [Press Enter]
    CPU Clock Drive ---------------------- : [800]
    PCI Express Clock Drive -------------- : [800]
    CPU Clock Skew (ps) ------------------ : [0ps]
    MCH Clock Skew (ps) ------------------ : [0ps]

    DRAM Performance Control
    Performance Enhance ------------------- : [STD] <--- set to STANDARD when overclocking
    Extreme Memory Profile --- (X.M.P.) --- : [Disabled] <--- Leave this Disabled
    (G)MCH Frequency Latch ---------------- : [Auto]
    System Memory Multiplier -------------- : [Auto] <-- this is the setting that you are using
    Memory Frequency (Mhz) ---------------- : [Auto]
    DRAM Timing Selectable ---------------- : [Auto] <-- set to MANUAL for overclocking

    Standard Timing Control
    CAS Latency Time -------- 7 ---------- : [Auto]
    tRCD ------------------- 7 ---------- : [Auto]
    tRP --------------------- 7 ---------- : [Auto]
    tRAS ------------------- 24 ---------- : [Auto]

    Advanced Timing Control
    tRRD ------------------- 4---------- : [Auto]
    tWTR ------------------- 5 ---------- : [Auto]
    tWR --------------------- 10 ---------- : [Auto]
    tRFC ------------------- 74 ---------- : [Auto]
    tRTP ------------------- 5 ---------- : [Auto]
    Command Rate (CMD) -------------------- : [0] <--- Auto or 0 is OK

    Driving Strength Profiles
    Driving Strength --------- : Press Enter <--- press ENTER to modify memory sub-timings when overclocking

    Channel A
    Static tRead Value --------------------- : [Auto]
    tRD Phase0 Adjustment ------------------ : [Auto] <-- leave this and below set to AUTO
    tRD Phase1 Adjustment ------------------ : [Auto]
    tRD Phase2 Adjustment ------------------ : [Auto]
    tRD Phase3 Adjustment ------------------ : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ----------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ----------------- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto] ps
    Dimm2 Clock Skew Control --------------- : [Auto] ps

    Channel B
    Static tRead Value --------------------- : [Auto]
    tRD Phase0 Adjustment ------------------ : [Auto] <-- leave this and below set to AUTO
    tRD Phase1 Adjustment ------------------ : [Auto]
    tRD Phase2 Adjustment ------------------ : [Auto]
    tRD Phase3 Adjustment ------------------ : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ----------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ----------------- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto] ps
    Dimm2 Clock Skew Control --------------- : [Auto] ps

    Motherboard Voltage Control
    CPU
    Voltage Types------------ Normal -------- Current -----
    Load-Line Calibration ----------------- : [Disabled]
    CPU Vcore --------------- 1.2875v ---- : [Auto]

    CPU Termination --------- 1.200V* ----- : [Auto]
    CPU PLL ----------------- 1.5500V* ----- : [Auto]

    CPU Reference ----------- 0.805V* ----- : [Auto]
    CPU Reference2 ---------- ?.???V* ----- : [Auto]

    MCH/ICH
    MCH Core ---------------- 1.100V ------- : [Auto]
    MCH Reference ----------- ?.???V ------- : [Auto]
    MCH/DRAM Ref ------------ ?.???V ------ : [Auto]
    ICH I/O ----------------- 1.550V ------- : [Auto]
    ICH Core ---------------- 1.100V ------- : [Auto]
    DRAM
    DRAM Voltage ------------ 1.500V ------- : [Auto]
    DRAM Termination -------- 0.750V ------- : [Auto]
    Channel A Reference ----- ?.???V ------- : [Auto]
    Channel B Reference ----- ?.???V ------- : [Auto]

    Advanced Settings
    Limit CPUID Max. to 3 ------------------ : [Disabled]
    No-Execute Memory Protect -------------- : [Enabled]
    CPU Enhanced Halt (C1E) ---------------- : [Disabled]
    C2/C2E State Support ------------------- : [Disabled]
    x C4/C4E State Support ----------------- : [Disabled]
    CPU Thermal Monitor 2 (TM2) ------------ : [Enabled]
    CPU EIST Function --------------------- : [Disabled]
    Virtualization Technology -------------- : [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect ------------- : [Disabled]
    Last edited by icenum; 01-30-2010 at 10:15 AM.
    t

  2. #12
    Join Date
    Jan 2010
    Location
    US
    Posts
    13

    Default Re: GA-EP45T-UD3LR Rev. 1-BSOD

    Windows Memory Diagnostic running going to do hour..

    Weird did great then Defrag and online seemed sluggish, any ideas?
    Last edited by icenum; 01-31-2010 at 12:41 PM.
    t

  3. #13
    Join Date
    Jan 2010
    Location
    Nashville
    Posts
    2

    Default Re: GA-EP45T-UD3LR Rev. 1-BSOD

    This board's memory controller seems to have issues. 6 gigs seems to work fine, but 8 causes stability issues. I've been pounding my head against the wall for 3 months with it, and am resigning to run just 6 gigs.

  4. #14
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP45T-UD3LR Rev. 1-BSOD

    If you think I might be able to help ya Spiral, let me know and post the settings you are trying with 8GB and I'll see if I can help you get it going.

    Please do of course give full specs, and a link to your memory as well. If you do give settings, please use a template from my signature, thanks!

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •