Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 3 FirstFirst 123
Results 21 to 27 of 27

Thread: Can someone please help me OC?




  1. #21
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Can someone please help me OC?

    Please post the settings that failed, and also the screen capture I have requested in post #19.
    Have you tried the procedure from post #17?

  2. #22
    Join Date
    Feb 2010
    Location
    Grand Forks, ND.
    Posts
    16

    Default Re: Can someone please help me OC?

    <HR style="BACKGROUND-COLOR: #d1d1e1; COLOR: #d1d1e1" SIZE=1 itxtvisited="1"> <!-- / icon and title --><!-- message -->
    Well Chike I'll be damned I got some settings to post and pass OCCT and IBT my stable settings are with the ram multiplier set at 2.00D so I have a 1:1 ratio, I tried 1066 but I got an error on OCCT so I went back to 4.25Ghz@1000mhz I have the graphs from OCCT do you want me to post them? Everything seems to be running fine so far, my cpu temps didn't go over 68*C on test and they never go over 55*C while gaming so I think I must be onto something here :) I don't think moving my memory up from 1000 to 1066 is really going to make that big of difference so I think I will choose to be happy with where it is at, I can't complain I'm sitting at almost a 1GHz OC. Important for me to adjust the settings that are still on AUTO? Thanks again for sticking with me through this OC I really appreciate it :) Oh yeah OCCT ran for 1hr and IBT ran for 5 passes.

    Motherboard: Gigabyte Model: GA-EP45-DS3R Rev#: A2 Bios Version: F11c
    Cpu: Intel E8600
    Ram: OCZ, Model/Part# Flex II 1150MHz, OCZ DDR2 PC2-9200 Flex II 4GB Series *EOL OCZ Technology
    Power Supply <NOBR style="FONT-FAMILY: verdana, geneva, lucida, 'lucida grande', arial, helvetica, sans-serif; COLOR: #0000ff; FONT-SIZE: 100%; FONT-WEIGHT: normal" id=itxt_nobr_19_0>Unit</NOBR>: Corsair, Model# HX620, Wattage 620w
    Default settings for new setups that are not overclocked.
    note: replace all ?? with the value displayed in your bios.
    ----> Replace "Auto" with manually set values.
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------------- : [FAST] <--- FAST is OK
    CPU Clock Ratio ---------------------- : [8X]
    Fine CPU Clock Ratio ----------------- : [0.5] < ignore if not available
    CPU Frequency ---------------------: 4.25GHz( 500x10)
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control --------------- : [Enabled]
    CPU Host Frequency (Mhz) --------------: [500]
    PCI Express Frequency (Mhz) ---------- : 100<--- Set to 100, never leave this on Auto
    C.I.A.2 ------------------------------ : [Disabled]
    Advanced Clock Control ------- [Press Enter]
    CPU Clock Drive ---------------------- : <<< 800
    PCI Express Clock Drive -------------- : <<< 900
    CPU Clock Skew (ps) ------------------ : <<<
    MCH Clock Skew (ps) ------------------ : <<<
    DRAM Performance Control
    Performance Enhance ------------------- : STANDARD<--- set to DISABLED when overclocking
    Extreme Memory Profile --- (X.M.P.) --- : [Disabled] <--- Leave this Disabled
    (G)MCH Frequency Latch ---------------- : AUTO
    System Memory Multiplier -------------- : 2.00D
    Memory Frequency (Mhz) ---------------- : 1000
    DRAM Timing Selectable ---------------- : AUTO<-- set to MANUAL for overclocking
    Standard Timing Control
    CAS Latency Time -------- 5 ---------- : AUTO
    tRCD ------------------- 5---------- : AUTO
    tRP --------------------- 5---------- : AUTO
    tRAS ------------------- 18---------- : AUTO
    Advanced Timing Control
    tRRD ------------------- 3---------- : [3]
    tWTR ------------------- 3---------- : [3]
    tWR --------------------- 6---------- : [6]
    tRFC ------------------- 54---------- : [54]
    tRTP ------------------- 3---------- : [3]
    Command Rate (CMD) -------------------- : [Auto] <--- Auto or 0 is OK
    Driving Strength Profiles
    Driving Strength --------- : AUTO<--- press ENTER to modify memory sub-timings when overclocking
    Channel A
    Static tRead Value --------------------- : AUTO
    tRD Phase0 Adjustment ------------------ : [Auto] <-- leave this and below set to AUTO
    tRD Phase1 Adjustment ------------------ : [Auto]
    tRD Phase2 Adjustment ------------------ : [Auto]
    tRD Phase3 Adjustment ------------------ : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ----------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ----------------- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto] ps
    Dimm2 Clock Skew Control --------------- : [Auto] ps
    Channel B
    Static tRead Value --------------------- : AUTO
    tRD Phase0 Adjustment ------------------ : [Auto] <-- leave this and below set to AUTO
    tRD Phase1 Adjustment ------------------ : [Auto]
    tRD Phase2 Adjustment ------------------ : [Auto]
    tRD Phase3 Adjustment ------------------ : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ----------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ----------------- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto] ps
    Dimm2 Clock Skew Control --------------- : [Auto] ps
    Motherboard Voltage Control
    CPU
    Voltage Types------------ Normal -------- Current -----
    Load-Line Calibration ----------------- : [Disabled]
    CPU Vcore --------------- 1.25000---- : AUTO<--- set to the 1.????? value
    CPU Termination --------- 1.200V* ----- : AUTO<--- set to the value to the left (Auto over-volts this too much when overclocking) Auto is OK if not overclocking
    CPU PLL ----------------- 1.500V* ----- : AUTO<--- set to the value to the left (Auto over-volts this too much when overclocking) Auto is OK if not overclocking
    CPU Reference ----------- 0.755V* ----- : [Auto] <--- Auto Will set this correctly
    CPU Reference2 ---------- 0.800V* ----- : [Auto] <--- Auto Will set this correctly
    MCH/ICH
    MCH Core ---------------- 1.100V ------- :AUTO<--- set to 1.20 for 2x2GB ram (1.24 - 1.26, or 1.05 might be needed)
    MCH Reference ----------- 0.800V ------- : .AUTO
    MCH/DRAM Ref ------------ 0.900V ------ : .AUTO
    ICH I/O ----------------- 1.500V ------- : AUTO<--- set to the value to the left
    ICH Core ---------------- 1.100V ------- : [Auto] <--- set to the value to the left
    DRAM
    DRAM Voltage ------------ 1.800V ------- : AUTO<--- set to the max rated ram voltage (for most memory)
    DRAM Termination -------- 0.900V ------- : AUTO
    Channel A Reference ----- 0.900V ------- : .AUTO
    Channel B Reference ----- 0.900V ------- : .AUTO
    Advanced Settings
    Limit CPUID Max. to 3 ------------------ : [Disabled]
    No-Execute Memory Protect -------------- : [Enabled]
    CPU Enhanced Halt (C1E) ---------------- : [Disabled]
    C2/C2E State Support ------------------- : [Disabled]
    x C4/C4E State Support ----------------- : [Disabled]
    CPU Thermal Monitor 2 (TM2) ------------ : [Enabled]
    CPU EIST Function --------------------- : [Disabled]
    Virtualization Technology -------------- : [Disabled] <--- Enabled if you use Vmware/Virtual PC
    Integrated Peripherals
    Legacy USB Storage Detect ------------- : [DISABLED] <--- set to Disabled when overclocking (this must be enabled to flash or boot from a USB drive)__________________

    <!-- / message --><!-- sig -->__________________
    CASE: Antec 900
    MOBO: GA-EP45-DS3R REV#A2-F11e
    CPU: E8600 @ 3.33GHz @ 3.33 x10 (Stock)
    CPU Cooler: Cooler Master V8
    RAM: OCZ FLEX II DDR2 PC2 9200 1150 2X2GB @ PC2 6400 (Stock settings) CL: 5-5-5-18 2.1v
    Video Card: SAPPHIRE|100282SR HD5850 1GB R
    PSU: Corsair HX620 Modular PSU 620w
    MNTR: ASUS|LCD 24" 2MS HDMI VW246H
    Hard Drive: OCZ Agility Series OCZSSD2-1AGT60G 2.5" 60GB SATA II MLC Internal Solid State Drive
    OS: Windows 7 64 bit

  3. #23
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Can someone please help me OC?

    All your voltages are set auto, that may dangerousely over volt some of them.
    Can you post a screen campure of EasyTune Adnavced Voltage tab?

  4. #24
    Join Date
    Feb 2010
    Location
    Grand Forks, ND.
    Posts
    16

    Default Re: Can someone please help me OC?

    Over volt? OMG we are not kidding here! I know I am tempted to go in there and start turning stuff down right away, I didn't use ET6 when I did this OC because I keep getting a driver could not load error every time ET6 starts, so not sure what the driver is for and how true the reading are? I've read other people having the same issue but have not found a solution for ET6 yet.
    CASE: Antec 900
    MOBO: GA-EP45-DS3R REV#A2-F11e
    CPU: E8600 @ 3.33GHz @ 3.33 x10 (Stock)
    CPU Cooler: Cooler Master V8
    RAM: OCZ FLEX II DDR2 PC2 9200 1150 2X2GB @ PC2 6400 (Stock settings) CL: 5-5-5-18 2.1v
    Video Card: SAPPHIRE|100282SR HD5850 1GB R
    PSU: Corsair HX620 Modular PSU 620w
    MNTR: ASUS|LCD 24" 2MS HDMI VW246H
    Hard Drive: OCZ Agility Series OCZSSD2-1AGT60G 2.5" 60GB SATA II MLC Internal Solid State Drive
    OS: Windows 7 64 bit

  5. #25
    Join Date
    Feb 2010
    Location
    Grand Forks, ND.
    Posts
    16

    Default Re: Can someone please help me OC?

    My volts were just to high for my comfort, I brought them down a bit until I can fine tune them better with your direction. Here is another SS of what I set in there now.
    CASE: Antec 900
    MOBO: GA-EP45-DS3R REV#A2-F11e
    CPU: E8600 @ 3.33GHz @ 3.33 x10 (Stock)
    CPU Cooler: Cooler Master V8
    RAM: OCZ FLEX II DDR2 PC2 9200 1150 2X2GB @ PC2 6400 (Stock settings) CL: 5-5-5-18 2.1v
    Video Card: SAPPHIRE|100282SR HD5850 1GB R
    PSU: Corsair HX620 Modular PSU 620w
    MNTR: ASUS|LCD 24" 2MS HDMI VW246H
    Hard Drive: OCZ Agility Series OCZSSD2-1AGT60G 2.5" 60GB SATA II MLC Internal Solid State Drive
    OS: Windows 7 64 bit

  6. #26
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Can someone please help me OC?

    Yes, over volt. CPU PLL is way high, so is VTT. Memory on the other hand may need more than 2.0v.
    Overvolting is OK within reasonable range, but don't leave it to auto, it has no reason at all :-)
    Is MCH Reference auto in BIOS or set manually?

  7. #27
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Can someone please help me OC?

    If you are not able to make it stable at 500MHz FSB try lower 470-490MHz, and then go higher 5MHz at a time.

    EDIT: please repost template for last settings.

Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •