Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: GA-P55A-UD3P Random restarts




  1. #1
    Join Date
    Feb 2010
    Location
    Mexico
    Posts
    3

    Exclamation GA-P55A-UD3P Random restarts

    Hey guys. I just built a system with the following specs:
    GA-P55A-UD3P v1.0 F4
    i5 - 750
    4GB 2 x 2GB PC3-12800 1600MHz DDR3 9-9-9-24 1.65v Corsair CMX4GX3M2A1600C9 XMS3
    Corsair CMPSU-650TX 650-Watt
    Radeon HD 5750
    Western Digital 1 TB
    Win 7 x64

    The first couple of days it ran fine for about 3 hours, then I started to get random shutdowns. Sometime the computer boots to Windows, then turns off after 10 minutes, others before getting to windows, and sometimes the power comes on, fans spin for a couple of seconds, then turns off. I have tried with only 1 stick of mem, but same result.

    My BIOS settings are as follows:
    Code:
    Advanced Frequency Settings:
     
    CPU Clock Ratio 20x
     
    Advanced Core Features  [Press Enter]:
     
    Intel(R) Turbo Boost Tech................[Auto]
    CPU Cores Enabled........................[All]
    CPU Multi-Threading......................[Auto]
    CPU Enhanced Halt (C1E)..................[Auto]
    C3/C6/C7 State Support...................[Auto]
    CPU Thermal Monitor......................[Auto]
    CPU EIST Function........................[Auto]
    Bi-Directional PROCHOT...................[Auto]
     
    QPI Clock Ratio..........................[Auto]
    QPI Link Speed........................[4.8GHz]
    Uncore Clock Ratio....................[16x]
    Uncore Frequency.........................2133MHz
     
    >>>>>   Standard Clock Control <<<<<
     
    Base Clock (BCLK) Control................[Disabled]
    BCLK Frequency ..........................[133]
    Extreme Memory Profile (X.M.P.)..........[Disabled]
    System Memory Multiplier (SPD)...........[Auto]
    Memory Frequency (MHz)................1333   1333
    PCI Express Frequency (MHz)..............[Auto]
    C.I.A.2..................................[Disabled]
     
    >>>>>   Advanced Clock Control   <<<<<
     
    CPU Clock Drive..........................[ 800mV]
    PCI Express Clock Drive..................[ 900mV]
    CPU Clock Skew...........................[    0ps]
     
    Advanced Memory Settings:
     
    Extreme Memory Profile (X.M.P.)..........[Disabled]
    System Memory Multiplier (SPD)...........[Auto]
    Memory Frequency (MHz)................1333    1333
    Performance Enhance   (SPD)............. [Turbo]
    DRAM Timing Selectable (SPD)............ [Auto]
    Profile DDR Voltage .................. 1.5V
    Profile QPI Voltage ..................  1.1V
    Channel Interleaving.....................6  Auto
    Rank Interleaving........................ 4   Auto
     
    >>>>>   Channel A & B
     
    Channel A Timing Settings            [Press Enter]:
    Cas Latency Time........................9   Auto
    tRCD....................................9   Auto
    tRP.....................................9   Auto
    tRAS...................................24   Auto
     
    >>>>>   Advanced Timing Control
     
    tRC....................................34   Auto
    tRRD...................................5    Auto
    tWTR...................................5   Auto
    tWR....................................10  Auto
    tWTP...................................21 Auto
    tWL....................................7    Auto
    tRFC...................................74  Auto
    tRTP...................................5    Auto
    tFAW...................................25  Auto
    Command Rate (CMD).................. 1  Auto
     
    >>>>>   Misc Timing Control
     
    B2B Cas Delay..........................-   Auto
    Round Trip Latency.....................46   Auto
     
    >>>>>   Channel B
     
    Channel B Timing Settings            [Press Enter]:
    Cas Latency Time........................9   Auto
    tRCD....................................9   Auto
    tRP.....................................9   Auto
    tRAS...................................24   Auto
     
    >>>>>   Advanced Timing Control
     
    tRC....................................34   Auto
    tRRD...................................5    Auto
    tWTR...................................5   Auto
    tWR....................................10  Auto
    tWTP...................................21 Auto
    tWL....................................7    Auto
    tRFC...................................74  Auto
    tRTP...................................5    Auto
    tFAW...................................25  Auto
    Command Rate (CMD).................. 1  Auto
     
    >>>>>   Misc Timing Control
     
    B2B Cas Delay..........................-   Auto
    Round Trip Latency.....................47   Auto
     
     
    Advanced Voltage Settings:
     
    ******Mother Board Voltage Control ******
    Voltage Types............Normal......Current
    --------------------------------------------
     
    >>> CPU
    Load Line Calibration...................[Auto]
    CPU Vcore..................1.17500v..[Auto]
    xDynamic Vcore (DVID)  +0.00000V  Auto
    QPI/VTT Voltage..........1.100v.....[Auto]
     
    >>> MCH/ICH
    PCH Core....................1.050v.....[Auto]
    CPU PLL......................1.800v.....[Auto]
     
    >>> DRAM
    DRAM Voltage..............1.500v.....[1.660v]
    DRAM Termination.........0.750v.....[Auto]
    Ch-A Data VRef............0.750v.....[Auto]
    Ch-A Data VRef............0.750v.....[Auto]
    Ch-B Data VRef............0.750v.....[Auto]
    Ch-B Data VRef............0.750v.....[Auto]
     
     
    Miscellaneous Settings:
     
    Isochronous Support....................[Enabled]
    Virtualisation technology..............[Enabled]
    USB Storage Detect ....................[Enabled] Located In Integrated Peripherals Page
    Thanks for the help

  2. #2
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: GA-P55A-UD3P Random restarts

    try setting your qpi voltage to 1.250000 and set system performance enhance to standard,also manually type in your ram timings select quick and enter what there specced at 8-8-8-24 ect
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

  3. #3
    Join Date
    Feb 2010
    Location
    Mexico
    Posts
    3

    Default Re: GA-P55A-UD3P Random restarts

    Tried with qpi voltage to 1.250000, system performance set to standard, and ram timings at 8-8-8-24 ect. It worked fine for about 4 days, with no issues at all.
    Suddenly yesterday the random restarts started again. Initially I got an error in the BIOS that said something like due to overclocking the system had become unstable. After another couple of random restarts I got a BIOS checksum error, and it started recovering. Once recovered, I still get restarts that keep my computer on anywhere from 2 seconds to 5 minutes.
    GA-P55A-UD3P v1.0 F4
    i5 - 750
    4GB 2 x 2GB PC3-12800 1600MHz DDR3 9-9-9-24 1.65v Corsair CMX4GX3M2A1600C9 XMS3
    Corsair CMPSU-650TX 650-Watt
    Radeon HD 5750
    Western Digital 1 TB
    Win 7 x64

  4. #4
    Join Date
    Feb 2010
    Location
    Mexico
    Posts
    3

    Default Re: GA-P55A-UD3P Random restarts

    Tried updating to F6, same results. Any clues?
    GA-P55A-UD3P v1.0 F4
    i5 - 750
    4GB 2 x 2GB PC3-12800 1600MHz DDR3 9-9-9-24 1.65v Corsair CMX4GX3M2A1600C9 XMS3
    Corsair CMPSU-650TX 650-Watt
    Radeon HD 5750
    Western Digital 1 TB
    Win 7 x64

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •