Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 16 of 25 FirstFirst ... 61415161718 ... LastLast
Results 151 to 160 of 243

Thread: Ga Ep45 UD3P rev 1.0 Bios assistance




  1. #151
    Join Date
    Feb 2010
    Location
    Germany (english)
    Posts
    256

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    Knew it,.
    Prime95

    445x9 build

    @
    450x9
    VTT 1.2
    MCh fRef 0.76 (with vtt @1.2 is 0.772)
    BSOD
    stop: 0,~0124 (Okay Vcore goes up, just thought I'd try)

    I see no point in dialing in here (not yet anyway)
    ----------------------------------------------------------------
    But: when and if I do.

    1st increase the VTT to 1.22 and test

    2nd. increase Vcore +1click and test

    3rd. Reduce MCH Freq -1 (making sure I set vtt to 1.20 before and then return vtt once MCH is entered. This in turn gives me my real MCH frequency calculated @ xyz ) and test

    So my next question is:
    If if that is the sequence in which I am looking for a stable setup. Would it be fair to presume that upon the errors occured is to which route we go from. And or repeat procedure at the next increment value,
    ------------------------------------------------------------
    Going back to 445x9 bios keeping the VCore from it at 1.2750v as I BSOD previuosly in Prime95
    Contains MCH Ref at 0.74.

    Update of Bios settings:

    PHP Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------------- : [Auto]
    CPU Clock Ratio ---------------------- : [9X]
    Fine CPU Clock Ratio ----------------- : [0.0]
    CPU Frequency ---------------------: .4005 Ghz 


    CPU Host Clock Control 
    --------------- : [Enabled]
    CPU Host Frequency (Mhz) --------------: [450]
    PCI Express Frequency (Mhz) ---------- : [101]
    C.I.A.2 ------------------------------ : [Disabled]


    Advanced Clock Control ------- [Press Enter]
    CPU Clock Drive ---------------------- : [800mV]
    PCI Express Clock Drive -------------- : [900mV]
    CPU Clock Skew (ps) ------------------ : [0]
    MCH Clock Skew (ps) ------------------ : [0]


    DRAM Performance Control
    Performance Enhance 
    ------------------- : [Standard]
    Extreme Memory Profile --- (X.M.P.) --- : [Disabled]
    (
    G)MCH Frequency Latch ---------------- : [Auto]
    System Memory Multiplier -------------- : [2.00D]
    Memory Frequency (Mhz) ---------------- : [890]
    DRAM Timing Selectable ---------------- : [Manual]


    Standard Timing Control
    CAS Latency Time 
    -------- ---------- : [5]
    tRCD ------------------- ---------- : [5]
    tRP --------------------- ---------- : [5]
    tRAS ------------------- 18 ---------- : [18]


    Advanced Timing Control
    tRRD 
    ------------------- ---------- : [Auto]
    tWTR ------------------- ---------- : [Auto]
    tWR -------------------- ---------- : [Auto]
    tRFC ------------------- 52 ---------- : [54]
    tRTP ------------------- ----------- : [Auto]
    Command Rate (CMD) --------0------------ : [Auto]


    Driving Strength Profiles
    Driving Strength 
    --------- : Press Enter


    Channel A
    Static tRead Value ---------------------- : [9]
    tRD Phase0 Adjustment ---------------- : [Auto]
    tRD Phase1 Adjustment ---------------- : [Auto]
    tRD Phase2 Adjustment ---------------- : [Auto]
    tRD Phase3 Adjustment ---------------- : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) -----------------: [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ---------------- : [Auto]
    Dimm1 Clock Skew Control ------------- : [Auto]
    Dimm2 Clock Skew Control ------------- : [Auto]


    Channel B
    Static tRead Value --------------------- : [9]
    tRD Phase0 Adjustment --------------- : [Auto]
    tRD Phase1 Adjustment ---------------- : [Auto]
    tRD Phase2 Adjustment ---------------- : [Auto]
    tRD Phase3 Adjustment ---------------- : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ---------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ---------------- : [Auto]
    Dimm1 Clock Skew Control ------------- : [Auto]
    Dimm2 Clock Skew Control ------------- : [Auto]


    Motherboard Voltage Control
    CPU
    Voltage Types
    ------------ Normal -------- Current -----
    Load-Line Calibration ----------------- : [Enabled]
    CPU Vcore --------------- 1.25000V ---- : [B]1.27500V[/B
    CPU Termination --------- 1.200V ----- : 1.200V
    CPU PLL 
    ----------------- 1.500V ----- : 1.500V
    CPU Reference 
    ----------- 0.760V ----- : [Auto]


    MCH/ICH
    MCH Core 
    ---------------- 1.100V ------- : 1.200V
    MCH Reference 
    ----------- 0.800V ------- : [[B]0.74[/B]]
    MCH/DRAM Ref ------------ 0.900V ------- : [Auto]
    ICH I/----------------- 1.500V ------- : 1.500V
    ICH Core 
    ---------------- 1.100V ------- : 1.100V
    DRAM
    DRAM Voltage 
    ------------ 1.800V ------- : 2.100V
    DRAM Termination 
    -------- 0.900V ------- : [Auto]
    Channel A Reference ----- 0.900V ------- : [Auto]
    Channel B Reference ----- 0.900V ------- : [Auto]


    Advanced Settings
    Limit CPUID Max
    to 3 ------------------ : [Disabled]
    No-Execute Memory Protect -------------- : [Enabled]
    CPU Enhanced Halt (C1E) ---------------- : [Disabled]
    C2/C2E State Support ------------------- : [Disabled]
    x C4/C4E State Support ----------------- : [Disabled]
    CPU Thermal Monitor 2 (TM2) ------------ : [Enabled]
    CPU EIST Function --------------------- : [Disabled]
    Virtualization Technology -------------- : [Disabled]

    Integrated Peripherals
    USB Storage 
    Function ------------- : [EnabledIn order to perform Mtest86 
    So this has already passed Mtest and IBT,.
    Prime 95 not run,.

    Monitoring info of current above bios.
    Ga Ep45 UD3P rev 1.0 Bios assistance-monitoring-info-bios-1-2750v-mchref-0-74-jpg

    Now running prime 95...
    Last edited by Deafty; 09-26-2011 at 10:19 PM.
    GAEP45 UD3P rev1.1
    Intel E8400 @4.2Ghz
    Corsair Cl4 DDr2 800
    Ati 4890
    Bequite 670watt
    Westerndigital Black 500gb

  2. #152
    Join Date
    Feb 2010
    Location
    Germany (english)
    Posts
    256

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    Results from Prime95 run at 10x 8min intervals on blend test

    Bios is in previous post. #151
    Ga Ep45 UD3P rev 1.0 Bios assistance-prime95-blend-test-10-8mins-png
    Passed.

    Moving on to 455x9x910
    And now testing....
    GAEP45 UD3P rev1.1
    Intel E8400 @4.2Ghz
    Corsair Cl4 DDr2 800
    Ati 4890
    Bequite 670watt
    Westerndigital Black 500gb

  3. #153
    Join Date
    Feb 2010
    Location
    Germany (english)
    Posts
    256

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    testing @ 455x9x910

    with 450x9x900 bios.

    passed memtest (5passes #5)
    passed IBT. (@2048Mb)auto
    Ga Ep45 UD3P rev 1.0 Bios assistance-ibt-pass-temps-450bios-png

    But note my Gflops are way down.
    Last edited by Deafty; 09-26-2011 at 04:44 PM.
    GAEP45 UD3P rev1.1
    Intel E8400 @4.2Ghz
    Corsair Cl4 DDr2 800
    Ati 4890
    Bequite 670watt
    Westerndigital Black 500gb

  4. #154
    Join Date
    Feb 2010
    Location
    Germany (english)
    Posts
    256

    Arrow Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    Here is a comparison.

    left is most recent @455x9
    Right is older @445x9
    Ga Ep45 UD3P rev 1.0 Bios assistance-comparison-4ghz-4-095-jpg

    Bios @ 445x9
    PHP Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------------- : [Auto]
    CPU Clock Ratio ---------------------- : [9X]
    Fine CPU Clock Ratio ----------------- : [0.0]
    CPU Frequency ---------------------: .4.00 Ghz 


    CPU Host Clock Control 
    --------------- : [Enabled]
    CPU Host Frequency (Mhz) --------------: [445]
    PCI Express Frequency (Mhz) ---------- : [101]
    C.I.A.2 ------------------------------ : [Disabled]


    Advanced Clock Control ------- [Press Enter]
    CPU Clock Drive ---------------------- : [800mV]
    PCI Express Clock Drive -------------- : [900mV]
    CPU Clock Skew (ps) ------------------ : [0]
    MCH Clock Skew (ps) ------------------ : [0]


    DRAM Performance Control
    Performance Enhance 
    ------------------- : [Standard]
    Extreme Memory Profile --- (X.M.P.) --- : [Disabled]
    (
    G)MCH Frequency Latch ---------------- : [Auto]
    System Memory Multiplier -------------- : [2.00D]
    Memory Frequency (Mhz) ---------------- : [890]
    DRAM Timing Selectable ---------------- : [Manual]


    Standard Timing Control
    CAS Latency Time 
    -------- ---------- : [5]
    tRCD ------------------- ---------- : [5]
    tRP --------------------- ---------- : [5]
    tRAS ------------------- 18 ---------- : [18]


    Advanced Timing Control
    tRRD 
    ------------------- ---------- : [Auto]
    tWTR ------------------- ---------- : [Auto]
    tWR -------------------- ---------- : [Auto]
    tRFC ------------------- 52 ---------- : [54]
    tRTP ------------------- ----------- : [Auto]
    Command Rate (CMD) --------0------------ : [Auto]


    Driving Strength Profiles
    Driving Strength 
    --------- : Press Enter


    Channel A
    Static tRead Value ---------------------- : [9]
    tRD Phase0 Adjustment ---------------- : [Auto]
    tRD Phase1 Adjustment ---------------- : [Auto]
    tRD Phase2 Adjustment ---------------- : [Auto]
    tRD Phase3 Adjustment ---------------- : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) -----------------: [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ---------------- : [Auto]
    Dimm1 Clock Skew Control ------------- : [Auto]
    Dimm2 Clock Skew Control ------------- : [Auto]


    Channel B
    Static tRead Value --------------------- : [9]
    tRD Phase0 Adjustment --------------- : [Auto]
    tRD Phase1 Adjustment ---------------- : [Auto]
    tRD Phase2 Adjustment ---------------- : [Auto]
    tRD Phase3 Adjustment ---------------- : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ---------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ---------------- : [Auto]
    Dimm1 Clock Skew Control ------------- : [Auto]
    Dimm2 Clock Skew Control ------------- : [Auto]


    Motherboard Voltage Control
    CPU
    Voltage Types
    ------------ Normal -------- Current -----
    Load-Line Calibration ----------------- : [Enabled]
    CPU Vcore --------------- 1.25000V ---- : [B]1.27500V[/B
    CPU Termination --------- 1.200V ----- : 1.200V
    CPU PLL 
    ----------------- 1.500V ----- : 1.500V
    CPU Reference 
    ----------- 0.760V ----- : [Auto]


    MCH/ICH
    MCH Core 
    ---------------- 1.100V ------- : 1.200V
    MCH Reference 
    ----------- 0.800V ------- : [[B]0.74[/B]]
    MCH/DRAM Ref ------------ 0.900V ------- : [Auto]
    ICH I/----------------- 1.500V ------- : 1.500V
    ICH Core 
    ---------------- 1.100V ------- : 1.100V
    DRAM
    DRAM Voltage 
    ------------ 1.800V ------- : 2.100V
    DRAM Termination 
    -------- 0.900V ------- : [Auto]
    Channel A Reference ----- 0.900V ------- : [Auto]
    Channel B Reference ----- 0.900V ------- : [Auto
    I only changed up the CPU frequency.
    Somewhere in Jakes thread Chike mentioned there's no point of increasing Cpu speed for no reason. I tend to agree
    Could be wrong but I think it was MCH ref related????

    I should point out that this is my tightest group of Gflops (interestingly).

    Anyways repeating test with VTT @1.22.....
    GAEP45 UD3P rev1.1
    Intel E8400 @4.2Ghz
    Corsair Cl4 DDr2 800
    Ati 4890
    Bequite 670watt
    Westerndigital Black 500gb

  5. #155
    Join Date
    Feb 2010
    Location
    Germany (english)
    Posts
    256

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    ahhh that's better.

    IBT @2048Mb auto
    Ga Ep45 UD3P rev 1.0 Bios assistance-4-095ghz-vtt1-22-png

    Note to bios: set VTT @ 1.22 (MCH Ref is set @ 0.74 which = 0.752)

    I'm asking Chike to cast his eye over these Gflops in relation to this 455x9x910 = 4.095Ghz. setting
    Last edited by Deafty; 09-26-2011 at 05:29 PM.
    GAEP45 UD3P rev1.1
    Intel E8400 @4.2Ghz
    Corsair Cl4 DDr2 800
    Ati 4890
    Bequite 670watt
    Westerndigital Black 500gb

  6. #156
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    It looks OK.
    If toy make a baseline at optimized stock CPU frequemcy, it's easy to calculate.
    OC GFlops = (OC frequency) / (baseline frequency) x (baseline GFlops)

  7. #157
    Join Date
    Feb 2010
    Location
    Germany (english)
    Posts
    256

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    Ok thanks.
    ----------
    Note: 455x9x910 with the above mentioned VTT change to 1.22V (not tested on Prime 95)

    Here are test results for 460x9x920:

    @ 455x9x910 bios: VTT is 1.22

    with no changes.
    Mtest 5 passes test#5
    passed
    IBT @2048Mb auto
    Passed

    Ga Ep45 UD3P rev 1.0 Bios assistance-4-095ghz-vtt1-22-png
    GAEP45 UD3P rev1.1
    Intel E8400 @4.2Ghz
    Corsair Cl4 DDr2 800
    Ati 4890
    Bequite 670watt
    Westerndigital Black 500gb

  8. #158
    Join Date
    Feb 2010
    Location
    Germany (english)
    Posts
    256

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    Now dirty testing 465x9x930...
    I see a need to up the VTT coming with 1 or clicks Vcore...
    We'll see...
    GAEP45 UD3P rev1.1
    Intel E8400 @4.2Ghz
    Corsair Cl4 DDr2 800
    Ati 4890
    Bequite 670watt
    Westerndigital Black 500gb

  9. #159
    Join Date
    Feb 2010
    Location
    Germany (english)
    Posts
    256

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    Update time.

    Was testing 465x9x930 with updated bios of VTT; is now 1.22 (where Mch Ref is set at 0.74 = 0.752)

    Here is Bios starting point

    PHP Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------------- : [Auto]
    CPU Clock Ratio ---------------------- : [9X]
    Fine CPU Clock Ratio ----------------- : [0.0]
    CPU Frequency ---------------------: .4.185 Ghz 


    CPU Host Clock Control 
    --------------- : [Enabled]
    CPU Host Frequency (Mhz) --------------: [[B]465[/B]]
    PCI Express Frequency (Mhz) ---------- : [101]
    C.I.A.2 ------------------------------ : [Disabled]


    Advanced Clock Control ------- [Press Enter]
    CPU Clock Drive ---------------------- : [800mV]
    PCI Express Clock Drive -------------- : [900mV]
    CPU Clock Skew (ps) ------------------ : [0]
    MCH Clock Skew (ps) ------------------ : [0]


    DRAM Performance Control
    Performance Enhance 
    ------------------- : [Standard]
    Extreme Memory Profile --- (X.M.P.) --- : [Disabled]
    (
    G)MCH Frequency Latch ---------------- : [Auto]
    System Memory Multiplier -------------- : [2.00D]
    Memory Frequency (Mhz) ---------------- : [890]
    DRAM Timing Selectable ---------------- : [Manual]


    Standard Timing Control
    CAS Latency Time 
    -------- ---------- : [5]
    tRCD ------------------- ---------- : [5]
    tRP --------------------- ---------- : [5]
    tRAS ------------------- 18 ---------- : [18]


    Advanced Timing Control
    tRRD 
    ------------------- ---------- : [Auto]
    tWTR ------------------- ---------- : [Auto]
    tWR -------------------- ---------- : [Auto]
    tRFC ------------------- 52 ---------- : [54]
    tRTP ------------------- ----------- : [Auto]
    Command Rate (CMD) --------0------------ : [Auto]


    Driving Strength Profiles
    Driving Strength 
    --------- : Press Enter


    Channel A
    Static tRead Value ---------------------- : [9]
    tRD Phase0 Adjustment ---------------- : [Auto]
    tRD Phase1 Adjustment ---------------- : [Auto]
    tRD Phase2 Adjustment ---------------- : [Auto]
    tRD Phase3 Adjustment ---------------- : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) -----------------: [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ---------------- : [Auto]
    Dimm1 Clock Skew Control ------------- : [Auto]
    Dimm2 Clock Skew Control ------------- : [Auto]


    Channel B
    Static tRead Value --------------------- : [9]
    tRD Phase0 Adjustment --------------- : [Auto]
    tRD Phase1 Adjustment ---------------- : [Auto]
    tRD Phase2 Adjustment ---------------- : [Auto]
    tRD Phase3 Adjustment ---------------- : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ---------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ---------------- : [Auto]
    Dimm1 Clock Skew Control ------------- : [Auto]
    Dimm2 Clock Skew Control ------------- : [Auto]


    Motherboard Voltage Control
    CPU
    Voltage Types
    ------------ Normal -------- Current -----
    Load-Line Calibration ----------------- : [Enabled]
    CPU Vcore --------------- 1.25000V ---- : [B]1.27500V[/B
    CPU Termination --------- 1.200V ----- : [B]1.220V[/B]
    CPU PLL ----------------- 1.500V ----- : 1.500V
    CPU Reference 
    ----------- 0.760V ----- : [Auto]


    MCH/ICH
    MCH Core 
    ---------------- 1.100V ------- : 1.200V
    MCH Reference 
    ----------- 0.800V ------- : [[B]0.74[/B]] (with Vtt @1.22 Mcf ref is now 0.752)
    MCH/DRAM Ref ------------ 0.900V ------- : [Auto]
    ICH I/----------------- 1.500V ------- : 1.500V
    ICH Core 
    ---------------- 1.100V ------- : 1.100V
    DRAM
    DRAM Voltage 
    ------------ 1.800V ------- : 2.100V
    DRAM Termination 
    -------- 0.900V ------- : [Auto]
    Channel A Reference ----- 0.900V ------- : [Auto]
    Channel B Reference ----- 0.900V ------- : [Auto
    Now then,.

    At above Bios no changes:

    Mtest #5 10 passes: PASSED
    IBT 2048 MB Auto: BSOD
    stop 0,0~0124
    Now dirty testing 465x9x930...
    I see a need to up the VTT coming with 1 or clicks Vcore...


    As my last change was VTT (on 455x9 bios) I now up:

    Vcore +1 click (from 1.2750v)
    IBT: 2048Mb auto: FAILED
    Error, possible memory corrupt warning (had it before recently) not worried yet.

    MCH Ref down 1: now 0.720 (Vtt @1.22 = 0.732)
    IBT: 2048MB auto: FAILED
    BSOD

    VTT up to 1.24 (MCH ref @ 0.72 is = 0.???) will edit later
    IBT: 2048MB auto: FAILED
    Microsoft framework error.

    Vcore+1
    IBT: FAILED
    check temps or reduce overclock. (temps were good, and the later,..)

    MCH Ref down 1
    0.70 (VTT is 1.24 so,.= ??? (will edit later)
    IBT: 2048MB auto:
    PASSED

    Ga Ep45 UD3P rev 1.0 Bios assistance-ibt-pass-vcore-2-vtt1-4-mch-0-70-png

    Now running Prime 95 Blend test 10x 8minute passes.
    Last edited by Deafty; 09-26-2011 at 08:07 PM. Reason: next test typ o
    GAEP45 UD3P rev1.1
    Intel E8400 @4.2Ghz
    Corsair Cl4 DDr2 800
    Ati 4890
    Bequite 670watt
    Westerndigital Black 500gb

  10. #160
    Join Date
    Feb 2010
    Location
    Germany (english)
    Posts
    256

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    Hmphh.

    Ga Ep45 UD3P rev 1.0 Bios assistance-prime-95-error-png
    GAEP45 UD3P rev1.1
    Intel E8400 @4.2Ghz
    Corsair Cl4 DDr2 800
    Ati 4890
    Bequite 670watt
    Westerndigital Black 500gb

Page 16 of 25 FirstFirst ... 61415161718 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •