Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 17 of 25 FirstFirst ... 71516171819 ... LastLast
Results 161 to 170 of 243

Thread: Ga Ep45 UD3P rev 1.0 Bios assistance




  1. #161
    Join Date
    Feb 2010
    Location
    Germany (english)
    Posts
    256

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    Ga Ep45 UD3P rev 1.0 Bios assistance-monitoring-software-prime95fail-jpg

    Now,... I could easily be wrong here,. but what about th MCH Core

    I really could use some help about now,...
    Last edited by Deafty; 09-26-2011 at 08:55 PM.
    GAEP45 UD3P rev1.1
    Intel E8400 @4.2Ghz
    Corsair Cl4 DDr2 800
    Ati 4890
    Bequite 670watt
    Westerndigital Black 500gb

  2. #162
    Join Date
    Feb 2010
    Location
    Germany (english)
    Posts
    256

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    Note: 455x9x910 with the above mentioned VTT change to 1.22V (not tested on Prime 95)
    Testing now to help with diagnostics

    10x 8min intervals BLEND TEST PRIME 95...
    GAEP45 UD3P rev1.1
    Intel E8400 @4.2Ghz
    Corsair Cl4 DDr2 800
    Ati 4890
    Bequite 670watt
    Westerndigital Black 500gb

  3. #163
    Join Date
    Feb 2010
    Location
    Germany (english)
    Posts
    256

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    ok,.It failed.

    455x9x910
    10x 8min intervals BLEND TEST PRIME 95...

    Ga Ep45 UD3P rev 1.0 Bios assistance-prime-fail-455-build-png

    Hmm,.what to do,...
    Last edited by Deafty; 09-26-2011 at 10:12 PM.
    GAEP45 UD3P rev1.1
    Intel E8400 @4.2Ghz
    Corsair Cl4 DDr2 800
    Ati 4890
    Bequite 670watt
    Westerndigital Black 500gb

  4. #164
    Join Date
    Feb 2010
    Location
    Germany (english)
    Posts
    256

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    This Bios 450x9
    Has passed Prime95 blend test 10x 8 minute intervals.
    Will run again overnight,. From there I can pick up the pieces if you were to help..

    PHP Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------------- : [Auto]
    CPU Clock Ratio ---------------------- : [9X]
    Fine CPU Clock Ratio ----------------- : [0.0]
    CPU Frequency ---------------------: .4005 Ghz 


    CPU Host Clock Control 
    --------------- : [Enabled]
    CPU Host Frequency (Mhz) --------------: [450]
    PCI Express Frequency (Mhz) ---------- : [101]
    C.I.A.2 ------------------------------ : [Disabled]


    Advanced Clock Control ------- [Press Enter]
    CPU Clock Drive ---------------------- : [800mV]
    PCI Express Clock Drive -------------- : [900mV]
    CPU Clock Skew (ps) ------------------ : [0]
    MCH Clock Skew (ps) ------------------ : [0]


    DRAM Performance Control
    Performance Enhance 
    ------------------- : [Standard]
    Extreme Memory Profile --- (X.M.P.) --- : [Disabled]
    (
    G)MCH Frequency Latch ---------------- : [Auto]
    System Memory Multiplier -------------- : [2.00D]
    Memory Frequency (Mhz) ---------------- : [890]
    DRAM Timing Selectable ---------------- : [Manual]


    Standard Timing Control
    CAS Latency Time 
    -------- ---------- : [5]
    tRCD ------------------- ---------- : [5]
    tRP --------------------- ---------- : [5]
    tRAS ------------------- 18 ---------- : [18]


    Advanced Timing Control
    tRRD 
    ------------------- ---------- : [Auto]
    tWTR ------------------- ---------- : [Auto]
    tWR -------------------- ---------- : [Auto]
    tRFC ------------------- 52 ---------- : [54]
    tRTP ------------------- ----------- : [Auto]
    Command Rate (CMD) --------0------------ : [Auto]


    Driving Strength Profiles
    Driving Strength 
    --------- : Press Enter


    Channel A
    Static tRead Value ---------------------- : [9]
    tRD Phase0 Adjustment ---------------- : [Auto]
    tRD Phase1 Adjustment ---------------- : [Auto]
    tRD Phase2 Adjustment ---------------- : [Auto]
    tRD Phase3 Adjustment ---------------- : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) -----------------: [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ---------------- : [Auto]
    Dimm1 Clock Skew Control ------------- : [Auto]
    Dimm2 Clock Skew Control ------------- : [Auto]


    Channel B
    Static tRead Value --------------------- : [9]
    tRD Phase0 Adjustment --------------- : [Auto]
    tRD Phase1 Adjustment ---------------- : [Auto]
    tRD Phase2 Adjustment ---------------- : [Auto]
    tRD Phase3 Adjustment ---------------- : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ---------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ---------------- : [Auto]
    Dimm1 Clock Skew Control ------------- : [Auto]
    Dimm2 Clock Skew Control ------------- : [Auto]


    Motherboard Voltage Control
    CPU
    Voltage Types
    ------------ Normal -------- Current -----
    Load-Line Calibration ----------------- : [Disabled]
    CPU Vcore --------------- 1.25000V ---- : [B]1.27500V[/B
    CPU Termination --------- 1.200V ----- : 1.200V
    CPU PLL 
    ----------------- 1.500V ----- : 1.500V
    CPU Reference 
    ----------- 0.760V ----- : [Auto]


    MCH/ICH
    MCH Core 
    ---------------- 1.100V ------- : 1.200V
    MCH Reference 
    ----------- 0.800V ------- : [[B]0.74[/B]]
    MCH/DRAM Ref ------------ 0.900V ------- : [Auto]
    ICH I/----------------- 1.500V ------- : 1.500V
    ICH Core 
    ---------------- 1.100V ------- : 1.100V
    DRAM
    DRAM Voltage 
    ------------ 1.800V ------- : 2.100V
    DRAM Termination 
    -------- 0.900V ------- : [Auto]
    Channel A Reference ----- 0.900V ------- : [Auto]
    Channel B Reference ----- 0.900V ------- : [Auto
    Thanks,.
    Last edited by Deafty; 09-27-2011 at 01:42 AM.
    GAEP45 UD3P rev1.1
    Intel E8400 @4.2Ghz
    Corsair Cl4 DDr2 800
    Ati 4890
    Bequite 670watt
    Westerndigital Black 500gb

  5. #165
    Join Date
    Feb 2010
    Location
    Germany (english)
    Posts
    256

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    Chike wrote to Jake when he was testing 459 x 9.0
    For the time being set MCH Core at 1.24v, we can lower it back later.

    Try 1 to 3 clicks higher CPU Reference for MCH 0.74, 0.72, and 0.70.
    Then(if still not stable) lower CPU Reference with MCH Reference 0.72(which you skipped last time)

    If still not stable try higher VTT (1.22, 1.24) repeating MCH Reference test (074, 0.72, 0.70, CPU Reference at auto) then with CPU above and below default.
    Chike

    I would also try 50-100ps on each of the clock skews(the other on 0) with the most stable(but not nesessaraly stable) settings for each VTT (1.2, 1.22, 1.24)
    Was also written but,....

    When I have some time I'll try this out..
    GAEP45 UD3P rev1.1
    Intel E8400 @4.2Ghz
    Corsair Cl4 DDr2 800
    Ati 4890
    Bequite 670watt
    Westerndigital Black 500gb

  6. #166
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    From what I read the CPU clock skew is the one that will need to be changed, MCH clock skew muc hless or not at all.
    Try 50-200ps CPU clock skew.

  7. #167
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    Quote Originally Posted by Deafty View Post
    ok,.It failed.

    455x9x910
    10x 8min intervals BLEND TEST PRIME 95...

    Ga Ep45 UD3P rev 1.0 Bios assistance-prime-fail-455-build-png

    Hmm,.what to do,...
    First, try to run customized small FFT with min/max FFT 8k. If it fails you got a winner.
    Being 8K FFT try higher vcore.

  8. #168
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    I posted this in Jake's thread:

    Deafty, From your HWMonitor screenshot, it looks like your cpu heatsink fan has smart fan control enabled. Even though your cpu temps are fine, try running your cpu fan at full speed all the time by disabling cpu smart fan control. This should help a bit with overall airflow inside your case and this should also provide somewhat better cooling for other motherboard components.

    Try a quick test with LoadLine Calibration disabled. Normal vdroop with LLC disabled is about 0.06 volts. You would need to increase cpu vcore by 0.06 - 0.70 volts to "break even". With high overclocks, some claim that their systems are not stable with LLC disabled. LLC is a double edged sword, it does allow you to run with lower cpu vcore, but it can contribute to instability, such as the random BSOD at idle with highly overclocked systems.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  9. #169
    Join Date
    Feb 2010
    Location
    Germany (english)
    Posts
    256

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    Thanks,. for the fan info was going to apply that later on ,.I have slided my CPU fan a little closer to the motherboard allowing some extra cool air to pas under the CPU heat sink and reach my motherboard heatsinks.

    Try a quick test with LoadLine Calibration disabled.
    EEEEEEk,...It already is,. big typo on bios page, thanks for catching it.

    So what would you recommend now,.

    I have been reading Jakes thread where he followed simple steps from chike (although to no avail)
    Then you chimed in with the b"brute force concept).
    Then he was away,.

    Do I need to play with MCH core, CPU ref, or,..
    I have passed Mtest, passed IBT 2048MB ram on auto setting.
    But am getting errors on Prime95 after only around 5-10 mins
    This is described by author of the programme as "flakey"
    I prefer solid than flakey but don't know how to harden it up!

    Please suggest next steps,.
    Crank the Vcore or tweak,.(I'm at 1.2750V)
    But I'm testing to pass Prime95! This is new to me.....
    GAEP45 UD3P rev1.1
    Intel E8400 @4.2Ghz
    Corsair Cl4 DDr2 800
    Ati 4890
    Bequite 670watt
    Westerndigital Black 500gb

  10. #170
    Join Date
    Sep 2011
    Location
    CT
    Posts
    135

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    Quote Originally Posted by Deafty View Post
    Thanks,. for the fan info was going to apply that later on ,.I have slided my CPU fan a little closer to the motherboard allowing some extra cool air to pas under the CPU heat sink and reach my motherboard heatsinks.


    EEEEEEk,...It already is,. big typo on bios page, thanks for catching it.

    So what would you recommend now,.

    I have been reading Jakes thread where he followed simple steps from chike (although to no avail)
    Then you chimed in with the b"brute force concept).
    Then he was away,.

    Do I need to play with MCH core, CPU ref, or,..
    I have passed Mtest, passed IBT 2048MB ram on auto setting.
    But am getting errors on Prime95 after only around 5-10 mins
    This is described by author of the programme as "flakey"
    I prefer solid than flakey but don't know how to harden it up!

    Please suggest next steps,.
    Crank the Vcore or tweak,.(I'm at 1.2750V)
    But I'm testing to pass Prime95! This is new to me.....
    Hi Deafty,

    Did you try playing with the references yet? If you have ET6 installed, you can adjust them without rebooting (just make sure you press "set").

Page 17 of 25 FirstFirst ... 71516171819 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •