Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 7 of 25 FirstFirst ... 5678917 ... LastLast
Results 61 to 70 of 243

Thread: Ga Ep45 UD3P rev 1.0 Bios assistance




  1. #61
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    If the above still don't work, try tRD 9 and then SMM 2.00D with tRD 9.

  2. #62
    Join Date
    Feb 2010
    Location
    Germany (english)
    Posts
    256

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    Ok,
    Thanks.
    GAEP45 UD3P rev1.1
    Intel E8400 @4.2Ghz
    Corsair Cl4 DDr2 800
    Ati 4890
    Bequite 670watt
    Westerndigital Black 500gb

  3. #63
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    I would NOT install additional memory modules for now. It will be much easier to o/c your system with 4GB of memory and find your highest stable setting.
    Even if your memory is limited to about 1000MHz, this means that your FSB (CPU Host Frequency) could probably approach 500MHz. Right now you're trying for a stable 425 x x 9 setting, so we have a long way to go before we reach that limit.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  4. #64
    Join Date
    Feb 2010
    Location
    Germany (english)
    Posts
    256

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    With 2 x2GB of CL4 800MHz memory, his MCH Core will propably OK for now with 1.20 - 1.22 volts while we're under 900MHz memory speeds.
    That's reassuring. thanks for the comment on that post Chike.

    I will go into bios later this afternoon and make these changes:

    CPU ClockRatio ----------------- : [9]
    CPU Host Frequency (Mhz) ------[425] (memory speed will now be 850MHz)
    Static tRead Value ----------------[8] (for memory channels A and B)
    CPU Vcore .. Currently 1.2875 will make it 2 clicks higher
    CPU PLL --------1.500V* ------ : [1.57] up from 1.55
    MCH Core ------------- 1.100V - : [1.24] up from 1.22

    Failing that I will try try tRD 9 and then SMM 2.00D with tRD 9.

    Will post my success later
    GAEP45 UD3P rev1.1
    Intel E8400 @4.2Ghz
    Corsair Cl4 DDr2 800
    Ati 4890
    Bequite 670watt
    Westerndigital Black 500gb

  5. #65
    Join Date
    Feb 2010
    Location
    Germany (english)
    Posts
    256

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    No problem, we can still spy on them and they can spy on us ;)
    In case you missed my post in Jake's thread, first one to 4.50GHz stable is the winner.
    Whoah!!! I'm gonna need some extra cooling there!! and some serious coffee. I might have to suggest that the other guys get some sleep while I catch up!
    GAEP45 UD3P rev1.1
    Intel E8400 @4.2Ghz
    Corsair Cl4 DDr2 800
    Ati 4890
    Bequite 670watt
    Westerndigital Black 500gb

  6. #66
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Thumbs up Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    Quote Originally Posted by Deafty View Post
    Will post my success later
    along with specific details and screen-shots....RIGHT??!!!
    I might have to suggest that the other guys get some sleep while I catch up!
    Naw, don't worry, they're in trouble and they don't even know it yet.
    Either their clutch is stuck, or they're afraid to shift into high gear and use the 9.0 cpu multiplier.
    Last edited by profJim; 09-22-2011 at 07:04 PM.

  7. #67
    Join Date
    Feb 2010
    Location
    Germany (english)
    Posts
    256

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    Bad news!

    I can't boot successfully

    1. made these changes
    CPU ClockRatio ------------------ : [9]
    CPU Host Frequency (Mhz) ------[425] (memory speed will now be 850MHz)
    Static tRead Value ---------------[8] (for memory channels A and B)
    CPU Vcore .. ----------------------[1.2875] no change here!
    CPU PLL -------------1.500V* --: [1.57] up from 1.55
    MCH Core -----------1.100V--- :[1.24] up from 1.22

    Description:
    Powers off (normal) reboot attempt no beep and cycles through this for 4 attempts then boots with beep into windows. CPU-Z shows default 9x333,3 (3GHz)

    2.made these changes to all of the above settings.
    Increased Vcore to 1.30000V.
    Description: 4 reboot cycles as above then boots into windows with default cpu-z 3Ghz

    3made this change to all of the above.
    TRD is now at 9
    description: No reboot cycles but stuck on the gigabyte post screen of motherboard (advertisement).
    waited 1 minute, unable to power off from case switch, turned off PSU, cleared CMOS

    4Made this change to all of the above.
    SMM now 2.0D
    description: 1 reboot attempt then beep, stuck on gigabyte advertisement screen (only top half of screen shown, the bottom black),pauses for 10 seconds (aprox), reboots, into windows, GPU-Z 3GHz

    5Made these change to all of the above.
    MCH core now at 1.26
    description: 3x restart cycle no beep, pause, then boots into windows default CPU-Z 3GHz.

    That's all I can provide hope it helps cos I'm stuck!
    GAEP45 UD3P rev1.1
    Intel E8400 @4.2Ghz
    Corsair Cl4 DDr2 800
    Ati 4890
    Bequite 670watt
    Westerndigital Black 500gb

  8. #68
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    Let's dumb down the cpu speed to eliminate memory settings as the problem
    Go into the bios, load your stable 3.6450 bios profile and make the following changes:
    Code:
    CPU Clock Ratio ---------------- : [8] <-- cpu speed = 3.40GHz
    CPU Host Frequency (Mhz) ------- : [425] (memory speed = 850MHz)
    System Memory Multiplier ------- : [2.00B] 
    
    Static tRead Value ------------- : [8] (for memory channels A and B)
    
    CPU Vcore ----------- 1.2750* -- : [1.28750]
    CPU PLL ------------- 1.500V* -- : [1.500] 
    MCH Core ------------- 1.100V -- : [1.22]
    Try these settings and report if there is a normal boot or there are any boot problems.
    Don't run any stress tests.
    Last edited by profJim; 09-22-2011 at 08:23 PM.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  9. #69
    Join Date
    Sep 2011
    Location
    CT
    Posts
    135

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    Quote Originally Posted by profJim View Post

    Right now we're behind Jake in the other E8400 thread, but I think that it's because he has been overclocking and at work for the past four days, and I don't think that he's bothering to sleep.
    Quote Originally Posted by profJim View Post
    Naw, don't worry, they're in trouble and they don't even know it yet.
    Either their clutch is stuck, or they're afraid to shift into high gear and use the 9.0 cpu multiplier.

    *You hear some abrupt cackling coming from an alleyway. As you turn your head, you see the shadowy figure of a man scribble something down in a notebook and disappear into the darkness*
    Last edited by jake8078; 09-22-2011 at 08:34 PM. Reason: grammar

  10. #70
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Ga Ep45 UD3P rev 1.0 Bios assistance

    ....and then.....

    I like good mysteries ;)
    ps: why aren't you studying QX9650 poop?
    Last edited by profJim; 09-22-2011 at 08:47 PM.

Page 7 of 25 FirstFirst ... 5678917 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •