Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 7 of 8 FirstFirst ... 5678 LastLast
Results 61 to 70 of 73

Thread: X58A-UD7 settings reset after shutdown from Win7




  1. #61
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: X58A-UD7 settings reset after shutdown from Win7

    Ya, I will test with F7p or F7q or above.

    I will enable it when I am ready to shut down for the night, then it will be left for 6-8 hours. This will be at 4.2Ghz

  2. #62
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: X58A-UD7 settings reset after shutdown from Win7

    K, I tested with F7p and it was a failed attempt.

    The system was shut down for 5 hours with ErP enabled, on bootup it failed to post instantly and of course restarted. The CMOS was not fully cleared (Still had saved profiles), Clock was reset, and fail safe settings were loaded/defaulted to.

    I sent in another report to GBT Taiwan tonight to see if they could look into this again, so hopefully the BIOS engineers will look and maybe come up with a solution soon. I think the issue is 1W is not enough to keep the CMOS powered, thus it resets, but I am no engineer so it's just a guess.

    I'll keep you guys posted once I hear something back on this.
    Last edited by Lsdmeasap; 06-09-2010 at 05:43 PM.

  3. #63
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: X58A-UD7 settings reset after shutdown from Win7

    Ok, not sure how many of you are following this thread still, or dealing with this issue currently, but Gigabyte has tested and been unable to replicate our findings.

    They would like to contact you directly, please send me a PM for further details.

  4. #64
    Join Date
    Apr 2010
    Location
    Adelaide
    Posts
    39

    Default Re: X58A-UD7 settings reset after shutdown from Win7

    thanks for this update- try shutting your computer down- if you don't clear the cmos, it will restart itself 5 sec after shutdown (even if shutdown from bios)
    I know of several other people with this same issue. I just tested EUP OFF for 20 hours plug pulled and the clock did not reset (further confirmation battery is fine, and EUP is the fault)

  5. #65
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: X58A-UD7 settings reset after shutdown from Win7

    I know some boards have an issue shutting down/rebooting due to the ITE Chip, this happens when turbo is enabled and RAID is selected
    GA-X58A-UD7 ITE Chip Problem

  6. #66
    Join Date
    Apr 2010
    Location
    Adelaide
    Posts
    39

    Default Re: X58A-UD7 settings reset after shutdown from Win7

    sounds similar- while i do have turbo enabled, I have never enabled any raid options...
    it might be related though!

  7. #67
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: X58A-UD7 settings reset after shutdown from Win7

    It could just be due to the EuP crash issues, I had the same thing happening this morning, that is how I found that thread again.

    I did notice it in the past once before though testing something at stock for someone, I never use turbo myself so I've only ran into it a time or two, the above should fix it up for you if you have not already fixed it.

    Thanks for the reminder on the clock reset I forgot this also happens, added that into my above description of the issue as I tested it.

  8. #68
    Join Date
    Apr 2010
    Location
    Adelaide
    Posts
    39

    Default Re: X58A-UD7 settings reset after shutdown from Win7

    had a hard-freeze including cursor- everything on the f7p bios under idle conditions (light use web browsing- under load is fine)... these same settings passed a 300 pass linx and 24 hours of prime at max priority on f6 (release)
    it was just a once off. have bumped vcore a bit.

    in your experience do these f7 betas need a bit more core than earlier ones?

    I suspect LLC causing as drop while idle caused the issue. unbder load it was fine (and this was the only hard freeze after a week of use on this bios, and after 1-2 months at 4200ghz same voltages on f6)
    Last edited by Oblique; 06-12-2010 at 04:00 PM.

  9. #69
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: X58A-UD7 settings reset after shutdown from Win7

    Not sure, I have only used F7e onwards

    What LLC setting are you using? I use Level 1 and have not had any issues, I can say though between versions you can't always use the same settings so you might just need more vcore for these BIOSes is all. Give it a small bump and you should be fine if that is the case

  10. #70
    Join Date
    Apr 2010
    Location
    Adelaide
    Posts
    39

    Default Re: X58A-UD7 settings reset after shutdown from Win7

    hi guys. can anyone confirm if this issue has been addressed yet? (the EUP one)

Page 7 of 8 FirstFirst ... 5678 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •