Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 45

Thread: EP45T-USB3P problem with PSU




  1. #21
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: EP45T-USB3P problem with PSU

    Could you also posta screen capture of MemSet main screen?

  2. #22
    Join Date
    Oct 2009
    Location
    Sand Springs,Ok.
    Posts
    172

    Default Re: EP45T-USB3P problem with PSU

    Chike , I've given up on the 4.00D and 4.00B Straps.When I have more time I'll work on them. I plan on running 3.60GHz all the time and this is the most stable out of the 3 I've been working with.Here's my settings - Could I get your opinion on what voltages or timings I should change?

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster --------------- : [Fast]
    CPU Clock Ratio ----------------------- : [9x]
    Fine CPU Clock Ratio ------------------ : [0.0]
    CPU Frequency ------------------------- : [3.60GHz(400x9)]
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control ---------------- : [Enabled]
    CPU Host Frequency (Mhz) ---------------: [400]
    PCI Express Frequency (Mhz) ----------- : [100]
    C.I.A.2 ------------------------------- : [Disabled]
    Advanced Clock Control -------- [Press Enter]
    CPU Clock Drive ----------------------- : 800
    PCI Express Clock Drive --------------- : 900
    CPU Clock Skew (ps) ------------------- : 0ps
    MCH Clock Skew (ps) ------------------- : 0ps
    DRAM Performance Control
    Performance Enhance -------- (SPD) ---- : [Standard]
    Extreme Memory Profile --- (X.M.P.) --- : [Profile 1]
    (G)MCH Frequency Latch ----- (SPD) ---- : [Auto]
    System Memory Multiplier -------------- : [3.33D]
    Memory Frequency (Mhz) ------[1600]---- : [1333]
    DRAM Timing Selectable ---------------- : [Manual]
    Standard Timing Control
    CAS Latency Time -------- [7] --------- : [7]
    tRCD ------------------- [8] --------- : [8]
    tRP --------------------- [7] --------- : [7]
    tRAS ------------------ [24] --------- : [24]
    Advanced Timing Control
    tRRD ------------------- [5] --------- : [5]
    tWTR ------------------- [6] --------- : [6]
    tWR ---------------------[12] --------- : [12]
    tRFC -------------------[88] --------- : [88]
    tRTP --------------------[6] --------- : [6]
    Command Rate (CMD) -------[0] --------- : [2]
    Driving Strength Profiles
    Driving Strength ---------- [Auto only] : [Auto]
    Channel A
    Static tRead Value ---------------- [9] : [9]
    Auto everything below
    Channel B
    Static tRead Value ---------------- [9] : [9]
    Auto everything below
    Motherboard Voltage Control
    CPU
    Voltage Types------------ Normal -------- Current ---
    Load-Line Calibration ----------------- : [Disabled]
    CPU Vcore --------------- 1.27500v ---- : [1.325](1.296 idle)(1.264-1.28 Prime95)
    CPU Termination --------- 1.200V* ----- : [1.260]
    CPU PLL ----------------- 1.500V* ----- : [1.500]
    CPU Reference ----------- 0.760V* ----- : [Auto]
    CPU Reference2 ---------- 0.800V* ----- : [Auto](Not in my BIOS)
    MCH/ICH
    MCH Core ---------------- 1.100V ------- : [1.240]
    MCH Reference ----------- 0.760V ------- : [Auto]
    MCH/DRAM Ref ------------ 0.750V ------ : [Auto]
    ICH I/O ----------------- 1.500V ------- : [1.500]
    ICH Core ---------------- 1.100V ------- : [1.100]

    DRAM
    DRAM Voltage ------------ 1.500V ------- : [1.35]
    DRAM Termination -------- 0.750V ------- : [Auto]
    Ch-A Data VRef.---------- 0.750v ------- : [Auto]
    Ch-B Data VRef.---------- 0.750v ------- : [Auto]
    Ch-A Address Ref.-------- 0.750v ------- : [Auto]
    Ch-B Address Ref.-------- 0.750v ------- : [Auto]
    Advanced Settings
    Limit CPUID Max. to 3 ------------------ : [Disabled]
    No-Execute Memory Protect -------------- : [Enabled]
    CPU Enhanced Halt (C1E) ---------------- : [Disabled]
    C2/C2E State Support ------------------- : [Disabled]
    x C4/C4E State Support ----------------- : [Disabled]
    CPU Thermal Monitor 2 (TM2) ------------ : [Enabled]
    CPU EIST Function --------------------- : [Disabled]
    Virtualization Technology -------------- : [Disabled]
    Integrated Peripherals
    Legacy USB Storage Detect ------------- : [Disabled]

    Attachment 2204
    THRASHER: Liquid Cooled
    Cooler Master XB EVO<>G1 Sniper 5 v1.0 F10<>4770k vid 1.022<>Batch#3332B365
    OC 4.4GHz 1.25v<>G.Skill F3-2400C10Q-32GTX 10-12-12-31 1.65v 2400MHz 32GB's
    2/Gigabyte R9 290X CrossFireX<>Corsair AX1200I<>2/Samsung 840 Pro 256GB raid0
    Windows 7 Ultimate<>idle 28c


  3. #23
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: EP45T-USB3P problem with PSU

    Voltages look OK.
    I would leave all advanced memory timings auto, and try standart timings 6-7-6-20, then try to lower tRD(Static tRead Value) of both channels to 8 or 7 if possible.

  4. #24
    Join Date
    Oct 2009
    Location
    Sand Springs,Ok.
    Posts
    172

    Default Re: EP45T-USB3P problem with PSU

    Chike, The settings you gave me worked great.I ran 3 passes Memtest86+ - no errors. I ran Prime95 4 hrs. - no errors.I also ran OCCT 1hr. and IBT Standard test.Things are looking great on this end.Where should I go from here?


    Attachment 2206
    THRASHER: Liquid Cooled
    Cooler Master XB EVO<>G1 Sniper 5 v1.0 F10<>4770k vid 1.022<>Batch#3332B365
    OC 4.4GHz 1.25v<>G.Skill F3-2400C10Q-32GTX 10-12-12-31 1.65v 2400MHz 32GB's
    2/Gigabyte R9 290X CrossFireX<>Corsair AX1200I<>2/Samsung 840 Pro 256GB raid0
    Windows 7 Ultimate<>idle 28c


  5. #25
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: EP45T-USB3P problem with PSU

    Quote Originally Posted by wibujo View Post
    Chike, The settings you gave me worked great.I ran 3 passes Memtest86+ - no errors. I ran Prime95 4 hrs. - no errors.I also ran OCCT 1hr. and IBT Standard test.
    Usually for OC it's recommended to run 8+ hors of Prime blend.
    Also next time run IBT at mac stress level, results look good though. What are core temps for IBT?

    Can you post a screen capture of MaxxMEM² - PreView just to satisfied my curiousity about memory performance?

    Quote Originally Posted by wibujo
    Things are looking great on this end.Where should I go from here?
    First of all save a BIOS profile, F11 in main BIOS screen, you can also save it on a USB flash drive for backup.

    Where do you want to go? 3.7/3.8GHz?

  6. #26
    Join Date
    Oct 2009
    Location
    Sand Springs,Ok.
    Posts
    172

    Default Re: EP45T-USB3P problem with PSU

    Chike, Do you think my RIG will be OK running 3.8GHz - If so - I'm all for it. If you think I should stay with the current settings I'll run Prime95 Blend for 8 hrs. "more if necessary" When I ran IBT Standard Test my case fans were on medium - I seen the temp hit 60c for a brief second - but Temps stayed around 58c.I just ran IBT Max with case fans on HIGH - here's a screen shot of the test and temps.I've also included the MaxxMEM2 Test.Am I supposed to leave my advanced timings on AUTO??? I also saved my current settings in BIOS.
    Thanks Again

    Attachment 2207
    THRASHER: Liquid Cooled
    Cooler Master XB EVO<>G1 Sniper 5 v1.0 F10<>4770k vid 1.022<>Batch#3332B365
    OC 4.4GHz 1.25v<>G.Skill F3-2400C10Q-32GTX 10-12-12-31 1.65v 2400MHz 32GB's
    2/Gigabyte R9 290X CrossFireX<>Corsair AX1200I<>2/Samsung 840 Pro 256GB raid0
    Windows 7 Ultimate<>idle 28c


  7. #27
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: EP45T-USB3P problem with PSU

    Quote Originally Posted by wibujo View Post
    Chike, Do you think my RIG will be OK running 3.8GHz - If so - I'm all for it. If you think I should stay with the current settings I'll run Prime95 Blend for 8 hrs. "more if necessary"
    Possibly even more, it all depends on your temperatures and how comfortable you feel with the voltages that will be required.
    You are making the rules. The stress tests are ran the greater is the assurance of system stability, it's a matter of probability. You may leave it for later if you plan moving to higher OC.

    Quote Originally Posted by wibujo
    When I ran IBT Standard Test my case fans were on medium - I seen the temp hit 60c for a brief second - but Temps stayed around 58c.I just ran IBT Max with case fans on HIGH - here's a screen shot of the test and temps.
    This is interesting, it's the second time I see that CPU temps(TMPIN1) is higher than core temps. The other one was Brigs I think, with a Q9550.
    Is the same temperature(CPU) reported by EasyTune HWMonitor?

    Quote Originally Posted by wibujo
    Am I supposed to leave my advanced timings on AUTO??? I also saved my current settings in BIOS.
    I wouldn't bother with advanced timings. You may try to lower tRFC to 70 or 68 for a little improvement. Not worth it IMO.
    Results are better than mine with DDR-1066 and 400MHz FSB, except the latency.
    Last edited by Chike; 03-02-2010 at 08:48 PM.

  8. #28
    Join Date
    Oct 2009
    Location
    Sand Springs,Ok.
    Posts
    172

    Default Re: EP45T-USB3P problem with PSU

    Chike, Man you got my curosity up.I have never run the MaxxMEM2 on my Core2Duo RIG before.I put the results below.If I can't get my Q9650 RIG to run as good as my Core2Duo RIG - I probably won't sell it to my brother.I guess what I'm trying to say is - Lets push the Q9650 RIG harder.It's only money.lol

    Attachment 2209
    THRASHER: Liquid Cooled
    Cooler Master XB EVO<>G1 Sniper 5 v1.0 F10<>4770k vid 1.022<>Batch#3332B365
    OC 4.4GHz 1.25v<>G.Skill F3-2400C10Q-32GTX 10-12-12-31 1.65v 2400MHz 32GB's
    2/Gigabyte R9 290X CrossFireX<>Corsair AX1200I<>2/Samsung 840 Pro 256GB raid0
    Windows 7 Ultimate<>idle 28c


  9. #29
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: EP45T-USB3P problem with PSU

    Good is what you call it. Wven with it's current OC the C2D won't match 75% of the Quad's IBT results, it will beat it in SuperPI test.
    The memory performance will probably can be matched using the same FSB and lower CPU frequency.
    Memory performance are not that important, depend of the saftware being used of course.

    Please post the current settings you had in the screen capture.

  10. #30
    Join Date
    Oct 2009
    Location
    Sand Springs,Ok.
    Posts
    172

    Default Re: EP45T-USB3P problem with PSU

    Chike here's my current settings.



    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster --------------- : [Fast]
    CPU Clock Ratio ----------------------- : [9x]
    Fine CPU Clock Ratio ------------------ : [0.0]
    CPU Frequency ------------------------- : [3.60GHz(400x9)]

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control ---------------- : [Enabled]
    CPU Host Frequency (Mhz) ---------------: [400]
    PCI Express Frequency (Mhz) ----------- : [100]
    C.I.A.2 ------------------------------- : [Disabled]

    Advanced Clock Control -------- [Press Enter]
    CPU Clock Drive ----------------------- : 800
    PCI Express Clock Drive --------------- : 900
    CPU Clock Skew (ps) ------------------- : 0ps
    MCH Clock Skew (ps) ------------------- : 0ps

    DRAM Performance Control
    Performance Enhance -------- (SPD) ---- : [Standard]
    Extreme Memory Profile --- (X.M.P.) --- : [Profile 1]
    (G)MCH Frequency Latch ----- (SPD) ---- : [Auto]
    System Memory Multiplier -------------- : [3.33D]
    Memory Frequency (Mhz) ------[1600]---- : [1333]
    DRAM Timing Selectable ---------------- : [Manual]

    Standard Timing Control
    CAS Latency Time -------- [7] --------- : [6]
    tRCD ------------------- [8] --------- : [7]
    tRP --------------------- [7] --------- : [6]
    tRAS ------------------ [24] --------- : [20]

    Advanced Timing Control
    tRRD ------------------- [5] --------- : [Auto]
    tWTR ------------------- [6] --------- : [Auto]
    tWR ---------------------[12] --------- : [Auto]
    tRFC -------------------[88] --------- : [Auto]
    tRTP --------------------[6] --------- : [Auto]
    Command Rate (CMD) -------[0] --------- : [Auto]

    Driving Strength Profiles
    Driving Strength ---------- [Auto only] : [Auto]

    Channel A
    Static tRead Value ---------------- [9] : [7]
    Auto everything below

    Channel B
    Static tRead Value ---------------- [9] : [7]
    Auto everything below

    Motherboard Voltage Control
    CPU
    Voltage Types------------ Normal -------- Current ---
    Load-Line Calibration ----------------- : [Disabled]
    CPU Vcore --------------- 1.27500v ---- : [1.325]
    CPU Termination --------- 1.200V* ----- : [1.260]
    CPU PLL ----------------- 1.500V* ----- : [1.500]
    CPU Reference ----------- 0.760V* ----- : [Auto]
    CPU Reference2 ---------- 0.800V* ----- : [Auto]

    MCH/ICH
    MCH Core ---------------- 1.100V ------- : [1.240]
    MCH Reference ----------- 0.760V ------- : [Auto]
    MCH/DRAM Ref ------------ 0.750V ------ : [Auto]
    ICH I/O ----------------- 1.500V ------- : [1.500]
    ICH Core ---------------- 1.100V ------- : [1.100]

    DRAM
    DRAM Voltage ------------ 1.500V ------- : [1.35]
    DRAM Termination -------- 0.750V ------- : [Auto]
    Ch-A Data VRef.---------- 0.750v ------- : [Auto]
    Ch-B Data VRef.---------- 0.750v ------- : [Auto]
    Ch-A Address Ref.-------- 0.750v ------- : [Auto]
    Ch-B Address Ref.-------- 0.750v ------- : [Auto]

    Advanced Settings
    Limit CPUID Max. to 3 ------------------ : [Disabled]
    No-Execute Memory Protect -------------- : [Enabled]
    CPU Enhanced Halt (C1E) ---------------- : [Disabled]
    C2/C2E State Support ------------------- : [Disabled]
    x C4/C4E State Support ----------------- : [Disabled]
    CPU Thermal Monitor 2 (TM2) ------------ : [Enabled]
    CPU EIST Function --------------------- : [Disabled]
    Virtualization Technology -------------- : [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect ------------- : [Disabled]
    THRASHER: Liquid Cooled
    Cooler Master XB EVO<>G1 Sniper 5 v1.0 F10<>4770k vid 1.022<>Batch#3332B365
    OC 4.4GHz 1.25v<>G.Skill F3-2400C10Q-32GTX 10-12-12-31 1.65v 2400MHz 32GB's
    2/Gigabyte R9 290X CrossFireX<>Corsair AX1200I<>2/Samsung 840 Pro 256GB raid0
    Windows 7 Ultimate<>idle 28c


Page 3 of 5 FirstFirst 12345 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •