Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 3 FirstFirst 123
Results 21 to 22 of 22

Thread: Overlocking GA-X58A-UD3R (rev. 1.0)




  1. #21
    Join Date
    Apr 2010
    Location
    Under A Lamp
    Posts
    14

    Default Re: Overlocking GA-X58A-UD3R (rev. 1.0)

    Quote Originally Posted by Lsdmeasap View Post
    Sounds terrible for performance!!

    No way you should need to use those timings, sounds like you are not using the right QPI/Vtt, dram voltage, or Uncore values.

    I have to agree with you there.. i bought this machine and they had to switch ram due to being out of the Corasair dominator. I researched it and it says this ram is for OLDER then X58 motherboards. According to Kingston they say it will work, "Sure it does" but it don't work worth a poop for OC'n.
    I don't have the fund for now to replace it but it is stable for now at this setting. I did increase the Dram Voltage to 1.7v in the bios everything else auto 10-10-10-30-T1
    I havent fooled witht he QPI/VTT or the Uncore values yet.

    I open to suggestions.
    INTEL i7-920 2.66GHZ 8M LGA 1366
    GIGABYTE X58A-UD3R Rev 1
    ASETEK 120MM WATERCOOLER
    6GB KINSTON HYPER X DDR3
    BLACK AZZA SOLANO 1000 FULL TOWER
    Samsung 850 EVO 500GB SSD
    2TB SATA III 3.0 GB 7200RPM HD
    BLACK LITE-ON 24X DVDRW
    SEASONIC X750 Gold PSU
    ONBOARD 7.1 SOUND
    ATI RADEON 5750 1GB DDR3
    WINDOWS 10 64Bit 10240

  2. #22
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Overlocking GA-X58A-UD3R (rev. 1.0)

    Kingston is not really the greatest overclocker to begin with, maybe the 2000Mhz kits not sure?

    Ahh, if you are not setting uncore and Especially QPI/Vtt this may be the only problem, set your own QPI/Vtt and see if you can then use better timings. Try 1.3-1.375 for 1600Mhz

Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •