Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 5 123 ... LastLast
Results 1 to 10 of 41

Thread: Ga-EX-58-UD3R




  1. #1
    Join Date
    Feb 2010
    Location
    Blainville
    Posts
    16

    Question Ga-EX-58-UD3R

    Hello,

    I'm a newbee...

    GA-EX58-UD3R rev 1.0
    Bios F10
    i7-920
    3 x 2 Gb (Hynix HMT125U6BFR8C-H9 DDR3-1333)
    Zalman CNPS10X Flex with 2 Scythe 110cfm with artic cooler paste
    all I did is raise from 133 at 150 x 21 (3150.06) and everything else at auto....
    temp iddle: 49 and full load: 83
    is there something I could do to lower voltage and consequently lower temperature

    I would like to achieve 3.2 to 3.5 and I don't know what settings I should use
    Last edited by Ally; 03-06-2010 at 09:48 PM.
    i7-920 (D0) 3.8 GHz GA-EX58-UD3R Antec Case 4U22EPS650/Antec TriCool 120mm (2)-TriCool 80mm (2) Zalman CNPS10X Flex/Scythe Slip Stream 120 (2) 6 Gb RAM DDR3 1600 Windows 7 Ultimate 64bits

  2. #2
    Join Date
    Feb 2010
    Location
    Blainville
    Posts
    16

    Default Re: Ga-EX-58-UD3R

    Ok I raised it to 160 x 20 turbo on
    QPI x36
    memory 9-9-9-24
    cpu voltage 1.12500 and QPI voltage: 1.180
    idle: 41 full load: 59
    180 x 20 turbo on
    idle: 41 full load: 63

    what about cpu voltage shoud I go lower or higher, same with QPI
    what about memory
    Last edited by Ally; 03-06-2010 at 11:17 PM.
    i7-920 (D0) 3.8 GHz GA-EX58-UD3R Antec Case 4U22EPS650/Antec TriCool 120mm (2)-TriCool 80mm (2) Zalman CNPS10X Flex/Scythe Slip Stream 120 (2) 6 Gb RAM DDR3 1600 Windows 7 Ultimate 64bits

  3. #3
    Join Date
    Feb 2010
    Location
    Blainville
    Posts
    16

    Default Re: Ga-EX-58-UD3R

    Is there a guide that I can read so I would know what is what and what's it for.....
    I'm trying to reach 3.5 to 3.8

    Thank you for taking the time to respond to this
    i7-920 (D0) 3.8 GHz GA-EX58-UD3R Antec Case 4U22EPS650/Antec TriCool 120mm (2)-TriCool 80mm (2) Zalman CNPS10X Flex/Scythe Slip Stream 120 (2) 6 Gb RAM DDR3 1600 Windows 7 Ultimate 64bits

  4. #4
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: Ga-EX-58-UD3R

    you have D0/C0 chip???? for 3.8ghz i use 1.18750 cpu v or(normal)cpu voltage setting in bios,and 1.30000 qpi voltage,system performance enhance to standard and 1.66 dram voltage keep all c1e and eist enabled if you have winxp/vista,if your using win7 disable them and go in win7 power saving and select balanced profile(it will reduce cpu when its idle but not under load saving idle temps and power)
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

  5. #5
    Join Date
    Feb 2010
    Location
    Blainville
    Posts
    16

    Default Re: Ga-EX-58-UD3R

    I followed your instructions....
    decreased cpu voltage from 1.125 to 1.1875
    increased qpi voltage from 1.180 to 1.300 (why the increase ?)
    changed system preformance enhance from turbo to standard (any particular reason ?)
    voltage my ram is set for a max of 1.5
    as for chip it's in my signature....D0

    Thank you nfor taking the time to explain this to me
    i7-920 (D0) 3.8 GHz GA-EX58-UD3R Antec Case 4U22EPS650/Antec TriCool 120mm (2)-TriCool 80mm (2) Zalman CNPS10X Flex/Scythe Slip Stream 120 (2) 6 Gb RAM DDR3 1600 Windows 7 Ultimate 64bits

  6. #6
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: Ga-EX-58-UD3R

    are you stable?youll need to increase qpi v when you overclock same as cpu v,it can be more stable if set to standard performance enhance,you can set it to turbo if you wish but if it freezes or blue screens set it back to standard,what are your temps like idle/load? did u set to balanced power saving profile in windows?
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

  7. #7
    Join Date
    Feb 2010
    Location
    Blainville
    Posts
    16

    Default Re: Ga-EX-58-UD3R

    stable with your settings.....and also stable with qpi at 1.180 and enhance mode to turbo....I did set balanced power saving profile in Win 7
    temperature at idle = 40c full load = 63c
    i7-920 (D0) 3.8 GHz GA-EX58-UD3R Antec Case 4U22EPS650/Antec TriCool 120mm (2)-TriCool 80mm (2) Zalman CNPS10X Flex/Scythe Slip Stream 120 (2) 6 Gb RAM DDR3 1600 Windows 7 Ultimate 64bits

  8. #8
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: Ga-EX-58-UD3R

    the temps are right,youll need less qpi v than me with 1600mhz ram,if you want to clock higher than 3.8ghz tho youll need more cpu v,and then it wont throttle when idle,it only does it when cpu v is on normal or auto + you wont notice any benefit in clocking higher
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

  9. #9
    Join Date
    Feb 2010
    Location
    Blainville
    Posts
    16

    Default Re: Ga-EX-58-UD3R

    Quote Originally Posted by warren300 View Post
    the temps are right,youll need less qpi v than me with 1600mhz ram,if you want to clock higher than 3.8ghz tho youll need more cpu v,and then it wont throttle when idle,it only does it when cpu v is on normal or auto + you wont notice any benefit in clocking higher
    A bing thank you for helping me like this.....have a great day !
    i7-920 (D0) 3.8 GHz GA-EX58-UD3R Antec Case 4U22EPS650/Antec TriCool 120mm (2)-TriCool 80mm (2) Zalman CNPS10X Flex/Scythe Slip Stream 120 (2) 6 Gb RAM DDR3 1600 Windows 7 Ultimate 64bits

  10. #10
    Join Date
    Feb 2010
    Location
    Blainville
    Posts
    16

    Question Re: Ga-EX-58-UD3R

    What is the break-in period for the Artic Silver paste and how much temperature reduction can I expect after that period ? In the first 48 hours I've seen a 1c drop....at idle I'm between 38 and 39 ........
    i7-920 (D0) 3.8 GHz GA-EX58-UD3R Antec Case 4U22EPS650/Antec TriCool 120mm (2)-TriCool 80mm (2) Zalman CNPS10X Flex/Scythe Slip Stream 120 (2) 6 Gb RAM DDR3 1600 Windows 7 Ultimate 64bits

Page 1 of 5 123 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •