Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Overclocking help for GA-X58-UD3R




  1. #1
    Join Date
    Aug 2009
    Posts
    55

    Default Overclocking help for GA-X58-UD3R

    BIOS template:

    Code:
    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Disabled]
    Bi-Directional PROCHOT ..................... [Enabled]
    
    
    Uncore & QPI Features:
    QPI Link Speed .............................. x36
    Uncore Frequency ..........................  x20
    Isonchronous Frequency ..................[Enabled]
    
    
    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................200
    PCI Express Frequency (MHz) ........... [103]
    
    C.I.A.2 [Disabled]
    
    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
    
    
    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [10]
    DRAM Timing Selectable (SPD) .......... [Manual]
    
    Channel A + B + C
    
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................8
    tRCD .......................................8
    tRP .........................................7
    tRAS .......................................24
    
    Below values may be left in Auto if you like, generally this is fine.  For those users who DO Set advanced timings manually, please see some of my thoughts and findings about these settings and rules here
    XtremeSystems Forums - View Single Post - Gigabyte EX58-UD5/Extreme Discussion Thread
    
    ##Channel A Advanced Timing Control
    tRC ........................................ Auto(27)
    tRRD .......................................Auto(4)
    tWTR ...................................... Auto(4)
    tWR ........................................Auto(8)
    tWTP .......................................Auto(19)
    tWL ........................................Auto(7)
    tRFC .......................................90
    tRTP .......................................Auto(4)
    tFAW ......................................Auto(16)
    Command Rate (CMD) ................1
    
    ##Channel A Misc Timing Control##
    Round Trip Latency ...................Auto(59)
    
    
    
    Advanced Voltage Control:
    
    CPU
    Load Line Calibration .................[Enabled]
    CPU Vcore ...............................Auto(1.29375v)
    QPI/VTT Voltage 1.150v ............Auto(1.150v)
    CPU PLL 1.800v .......................Auto(1.800v)
    
    MCH/ICH
    PCIE 1.500v ...........................Auto(1.500v)
    QPI PLL 1.100v .......................Auto(1.10v)
    IOH Core 1.100v .....................Auto(1.10)
    ICH I/O 1.500v .......................Auto(1.50)
    ICH Core 1.1v ........................Auto(1.10)
    
    DRAM
    DRAM Voltage 1.500v ..............1.66v
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]
    Sitting here running but not 100% stable.......

    Any and all help appreciated!!

    :

  2. #2
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: Overclocking help for GA-X58-UD3R

    follow my guide in sig for a quick easy 3.8ghz clock,might need 1.250000 cpu v if you have c)chip for D0 set it to normal v
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

  3. #3
    Join Date
    Aug 2009
    Posts
    55

    Default Re: Overclocking help for GA-X58-UD3R

    Thanks Warren, but not stable....tried running Prime95 to test and got a BSOD/Re-boot.....

    :

  4. #4
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: Overclocking help for GA-X58-UD3R

    what chip you have D0/C0?? and what cpu/qpi voltages did you test with? im 100% stable with those settings but every board/cpu/ram is different so itll need slight tweaking
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

  5. #5
    Join Date
    Aug 2009
    Posts
    55

    Default Re: Overclocking help for GA-X58-UD3R

    Got a D0 Chip, and tested with settings according to the link in your sig......
    http://i49.tinypic.com/5fkahs.jpg
    although I did not enable C1E or C3/C6 State support.....


    :

  6. #6
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: Overclocking help for GA-X58-UD3R

    did you set your ram timing manually? set system performance enhance to standard?? set ram voltage to 1.66?try with qpi voltage on 1.320000 to 1.340000 test with both
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

  7. #7
    Join Date
    Aug 2009
    Posts
    55

    Default Re: Overclocking help for GA-X58-UD3R

    Well, I've got 'er running pretty stable now only with the RAM set at 1600Mhz, QPI/VTT @ Auto w/1.35vcore......running Prime95 for stability check.....


    :

  8. #8
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: Overclocking help for GA-X58-UD3R

    what speed ram you have? set qpi manually as auto always overvolts it,try lowering it one click and re-test.did you set cpu voltage on the normal setting??
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

  9. #9
    Join Date
    Aug 2009
    Posts
    55

    Default Re: Overclocking help for GA-X58-UD3R

    Quote Originally Posted by warren300 View Post
    what speed ram you have? set qpi manually as auto always overvolts it,try lowering it one click and re-test.did you set cpu voltage on the normal setting??
    RAM is DDR3 2000 but I can't get the machine stable running the RAM at that speed. CPU vcore is @ 1.35v....Suggested setting for QPI/VTT is what???


    :

  10. #10
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: Overclocking help for GA-X58-UD3R

    cpu vcore is way too high for 3.8ghz clock you should be using around 1.18750v/qpi 1.30000v........set ram at 1800 or 1900mhz i think at 3.8ghz and try with 1.35000qpi as you have faster ram than me, 3 main voltages you dont wanna leave on auto are ram/cpu and qpi......to get your ram stable at 2000mhz you should raise qpi v,you shouldnt need to raise cpu v that much.dont go over 1.4 qpi v tho you wont need that much
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •