Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 23

Thread: Can't boot if I do anything to RAM EX58-UD4P OCZ Gold 1600




  1. #11
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: Can't boot if I do anything to RAM EX58-UD4P OCZ Gold 1600

    what cpu voltage?thats strange,try with 21xuncore or 1.34 qpi
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

  2. #12
    Join Date
    Mar 2010
    Location
    United States
    Posts
    14

    Default Re: Can't boot if I do anything to RAM EX58-UD4P OCZ Gold 1600

    vcore is about 1.20, which should be more than enough (i know this isn't the issue, as it boots when all memory related settings are auto)

    tried uncore x21 and upping qpi, no joy

  3. #13
    Join Date
    Mar 2010
    Location
    United States
    Posts
    14

    Default Re: Can't boot if I do anything to RAM EX58-UD4P OCZ Gold 1600

    so i've been reading around about on threads specific to my memory (OCZ3G1600LV6GK)

    ive got the cmd rate set to 2t, (had 1t before) 1.66V mem and 1.355

    got past the windows logo screen (where it used to freeze) but still can't get log in screen...what gives

  4. #14
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: Can't boot if I do anything to RAM EX58-UD4P OCZ Gold 1600

    try with 8-8-8-28-1t timings
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

  5. #15
    Join Date
    Mar 2010
    Location
    United States
    Posts
    14

    Default Re: Can't boot if I do anything to RAM EX58-UD4P OCZ Gold 1600

    ok, the timings don't seem to be the problem. i can boot 8-8-8-24-1t or 8-8-8-24-2t or 8-8-8-28-1t...as long as the DRAM voltage is set to auto

    as soon as i put it at 1.66, it won't boot


    so, im booted right now (8-8-8-28-1t) and installed easytune6 to check the dram voltage, and it is reporting at 1.80V (its set auto)
    isn't that way too high?

    is my ram done for? what is going on here?

    also, the RAM model is: OCZ3G1600LV2G

  6. #16
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: Can't boot if I do anything to RAM EX58-UD4P OCZ Gold 1600

    is it tripple channel? i told you auto will overvolt it,it should run at 1.66v maybe you could make a note of all your oc settings and then load optimized deafualts and re-enter the oc again
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

  7. #17
    Join Date
    Mar 2010
    Location
    United States
    Posts
    14

    Default Re: Can't boot if I do anything to RAM EX58-UD4P OCZ Gold 1600

    Very strange. I flashed BIOS to f12 and loaded optimized defaults. changed ONLY the dram voltage to 1.66 and it booted fine. hwmonitor reports it at 1.65 so that is perfect. im going to change things 1 at a time now to isolate the issue i was having before (if it still exists, i think it does)

  8. #18
    Join Date
    Mar 2010
    Location
    United States
    Posts
    14

    Default Re: Can't boot if I do anything to RAM EX58-UD4P OCZ Gold 1600

    ok, getting issues when i bump the mem to x12 (1600mhz with default 133 bclk)

    not really sure what to do here...

  9. #19
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: Can't boot if I do anything to RAM EX58-UD4P OCZ Gold 1600

    set system performance enhnce to standard,put your cpu voltage on normal,enter all ram timings manually, do this with 133bclk all the way upto 180bclk and set qpi to 1.3v 1.250000v if your clocked lower than 3.8ghz then see if its more stable
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

  10. #20
    Join Date
    Mar 2010
    Location
    United States
    Posts
    14

    Default Re: Can't boot if I do anything to RAM EX58-UD4P OCZ Gold 1600

    worked up until bclk of 172, i can do bclk 180 with a QPI of 1.355 although it is not very stable

Page 2 of 3 FirstFirst 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •