Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: GA-EP45-DS3L, E6500, F11b Inop




  1. #1
    Join Date
    Mar 2010
    Location
    China
    Posts
    3

    Default GA-EP45-DS3L, E6500, F11b Inop

    I have GA-EP45-DS3L and have an E5200 running fine.
    I got a deal on an E6500 and installed it.
    The system will not recognize it and will not run for long (<3 minutes).
    I checked the CPU list for the board and the 6500 is listed with F10 being required. I started with F10, then went to F11b when F10 did not work.
    Normally, the system will just lock, even in the BIOS settings pages after 1-2 minutes.

    The CPU is not recognized at its rated speed unless I enter a mult of 11.
    If I allow it to try to boot, I've gotten as far as 'Welcome' a few times.
    I also learned that if I hit reset instead of power off the system will need a BIOS battery drain or it will not ever POST.
    Temps are fine (<32 C)

    I RMA'd the first CPU I received, but the second has the same symptoms. Gotta be a timing/settings problem.

    Ideas?

    Thanks, it's driving me crazy...

    Any ideas?

  2. #2
    Join Date
    Mar 2010
    Location
    China
    Posts
    3

    Default Memory Info

    Memory Module Properties
    Module Name OCZ XTC Platinum OCZ2P10662G
    Serial Number None
    Module Size 2 GB (2 ranks, 8 banks)
    Module Type Unbuffered DIMM
    Memory Type DDR2 SDRAM
    Memory Speed DDR2-800 (400 MHz)
    Module Width 64 bit
    Module Voltage SSTL 1.8
    Error Detection Method None
    Refresh Rate Reduced (7.8 us), Self-Refresh

    Memory Timings
    @ 400 MHz 5-5-5-15 (CL-RCD-RP-RAS) / 24-54-3-6-3-3 (RC-RFC-RRD-WR-WTR-RTP)
    @ 333 MHz 4-5-5-13 (CL-RCD-RP-RAS) / 20-45-3-5-3-3 (RC-RFC-RRD-WR-WTR-RTP)
    @ 266 MHz 3-4-4-10 (CL-RCD-RP-RAS) / 16-36-2-4-2-2 (RC-RFC-RRD-WR-WTR-RTP)

    Enhanced Performance Profile
    Profile Name High Frequency
    Optimal Performance Profile Yes
    Memory Speed DDR2-1066 (533 MHz)
    Voltage 2.2 V
    Memory Timings 5-5-5-15 (CL-RCD-RP-RAS)
    Row Cycle Time (tRC) 26T
    Command Rate (CR) 2T
    Write Recovery Time (tWR) 6T

    Memory Module Features
    Analysis Probe Not Present
    FET Switch External Disabled
    Weak Driver Supported

    Memory Module Manufacturer
    Company Name OCZ Technology
    Product Information Desktop Memory OCZ Technology

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •