Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: GA-EP35-DS3 Won't Boot. All "phase led"s on, fans on.




  1. #1
    Join Date
    Mar 2010
    Location
    Australia
    Posts
    3

    Unhappy GA-EP35-DS3 Won't Boot. All "phase led"s on, fans on.

    The system has been working fine for about two years. Went to dinner today and when I came back the <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
    video signal was dead, fans were still on and all phase led's were on.<o:p></o:p>
    <o:p></o:p>
    System can only be turned off when PSU is switched off. When PSU is switched on and the power <o:p></o:p>
    button pressed the fans come on, the "phased led"s light and that’s it. No video signal. I can hear either <o:p></o:p>
    the hard disks or DVD drive doing something though also one light comes on the keyboard immediately <o:p></o:p>
    when the power button is depressed.

    Any idea what this status mean and what likely needs doing to fix the rascal? It has been fairly cool here
    (26 degrees C) for a few weeks until today when it was in the low thirties.

    All phased led lights remain on steady ...
    Last edited by idiom; 03-09-2010 at 05:51 PM.

  2. #2
    Join Date
    Mar 2010
    Location
    Australia
    Posts
    3

    Default Re: GA-EP35-DS3 Won't Boot. All "phase led"s on, fans on.

    I'm also getting no beep codes :-(. I've checked there is a small speaker connected to the speaker connection.

  3. #3
    Join Date
    Mar 2010
    Location
    Australia
    Posts
    3

    Default Re: GA-EP35-DS3 Won't Boot. All "phase led"s on, fans on.

    As I dont have any spare compatible components to try swapping stuff out I have had to resort to
    a PC repair shop. The diagnosis is faulty PSU.

  4. #4
    Join Date
    Oct 2011
    Location
    Russia
    Posts
    1

    Default Re: GA-EP35-DS3 Won't Boot. All "phase led"s on, fans on.

    Hello! I am having problem, witch mentioned above. Tell me please how you solved this problem? And, what is this problem?
    Regards...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •