Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 6 of 6

Thread: Q6600 overclock + GA-EP45-UD3P = EXPLORER.EXE CRASH! HELP!!




  1. #1
    grandosegood is offline Junior Member
    Join Date
    Dec 2008
    Location
    Los Angeles
    Posts
    27

    Default Q6600 overclock + GA-EP45-UD3P = EXPLORER.EXE CRASH! HELP!!

    My setup: Q6600 + GA-EP45-UD3P(bios9f) + 8GB (2GB x 4) DDR2 800MHX G.Skill

    My problem: Unstable overclock, causes various app crashes including the most frequent explorer.exe and right click function.

    My request: help me stabilize my overclock at 3.6 GHZ, which was my goal. I'll settle for 3.5 too.

    My BIOS Specs: adjusted for overclock and Vista/ OS X Leopard dual boot are attached

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 8x
    CPU Frequency ...........................: 3.36GHz (420x8)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 420Mhz
    PCI Express Frequency (Mhz) .........: 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800mV
    PCI Express Clock Drive.................: 900mV
    CPU Clock Skew (ps)....................: 50ps
    MCH Clock Skew (ps)...................: 150ps


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: [Not Exist on my bios]
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: [2.00B]
    Memory Frequency (Mhz) ..............: 840
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................ 5 Auto
    tRCD ......................................... 5 Auto
    tRP'........................................... 5 Auto
    tRAS.......................................... 15


    Advanced Timing Control
    tRRD........................................... 3 Auto
    tWTR.......................................... 4
    tWR............................................ 4
    tRFC........................................... 65
    tRTP........................................... 4
    Command Rate (CMD) ....................: 2

    Driving Strength Profiles
    Driving Strength ............................ 1066

    Channel A
    Static tRead Value.........................:9
    tRD Phase0 Adjustment...................: 0 Auto
    tRD Phase1 Adjustment...................: 0 Auto
    tRD Phase2 Adjustment .................: 0 Auto
    tRD Phase3 Adjustment..................: 0 Auto
    Trd2rd(Different Rank)....................: 6 Auto
    Twr2wr(Different Rank)...................: 6 Auto
    Twr2rd(Different Rank)...................: 5 Auto
    Trd2wr(Same/Diff Rank)..................: 8 Auto
    Dimm1 Clock Skew Control...............: Auto
    Dimm2 Clock Skew Control...............: Auto
    DDR Write Training Control.............: Auto

    Channel B
    Static tRead Value.........................: 9
    tRD Phase0 Adjustment...................: 0 Auto
    tRD Phase1 Adjustment...................: 0 Auto
    tRD Phase2 Adjustment .................: 0 Auto
    tRD Phase3 Adjustment..................: 0 Auto
    Trd2rd(Different Rank)....................: 6 Auto
    Twr2wr(Different Rank)...................: 6 Auto
    Twr2rd(Different Rank)...................: 5 Auto
    Trd2wr(Same/Diff Rank)..................: 8 Auto
    Dimm1 Clock Skew Control...............: Auto
    Dimm2 Clock Skew Control...............: Auto
    DDR Write Training Control.............: Auto

    Motherboard Voltage Control

    CPU
    Load-Line Calibration..................: [Enabled]

    CPU Vcore….……….........................: 1.36875V

    CPU Termination…............: Auto 1.2V

    CPU PLL…………………...........: 1.50V

    CPU Referen.…………...........: .760V

    CPU Reference2……….......: [Not Exist on my bios]

    MCH/ICH
    MCH Core……………................: 1.34V
    MCH Reference….……...........; Auto 0.76V
    MCH/DRAM Ref.….................: Auto .900V
    ICH I/O……………….................: 1.50V
    ICH Core…………...……............: 1.2V

    DRAM
    DRAM Voltage ……................: 2.0V
    DRAM Termination .…............: [Auto]
    Channel A Reference ............: [Auto]
    Channel B Reference ............: [Auto]

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Disabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Enabled]
    Init Display first......................: PEG
    HDD S.M.A.R.T Capability................: [Enabled]
    No-Execute Memory Protect...............: [Enabled]

    Integrated Peripherals
    USB Storage Function ..............[Enabled]

  2. #2
    Join Date
    Sep 2008
    Posts
    990

    Default Re: Q6600 overclock + GA-EP45-UD3P = EXPLORER.EXE CRASH! HELP!!

    Use a "D" system memory multiplier and increase Vcore. What are you using to test stability and what are your temperatures?


  3. #3
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Q6600 overclock + GA-EP45-UD3P = EXPLORER.EXE CRASH! HELP!!

    Please follow items 1,2, and 4, in this post also for additional informaion of your system and settings.

  4. #4
    grandosegood is offline Junior Member
    Join Date
    Dec 2008
    Location
    Los Angeles
    Posts
    27

    Default Re: Q6600 overclock + GA-EP45-UD3P = EXPLORER.EXE CRASH! HELP!!

    What should my vcore and other settings be at to reach 3.6? also i use intel burn test for stability and prime 95.

  5. #5
    Join Date
    Feb 2010
    Location
    US
    Posts
    18

    Default Re: Q6600 overclock + GA-EP45-UD3P = EXPLORER.EXE CRASH! HELP!!

    Wow you have nice voltages >.>, I have 1.408 for 3.4 lawl.
    Do you test your RAM also? If you don't, do it.
    Q6600@3.4 :(.

  6. #6
    grandosegood is offline Junior Member
    Join Date
    Dec 2008
    Location
    Los Angeles
    Posts
    27

    Default Re: Q6600 overclock + GA-EP45-UD3P = EXPLORER.EXE CRASH! HELP!!

    Well after adjusting to 3.5ghz and 1.385 vcore i blue screened 5 min into CPU stress test. Test app was latest app of everest. what should i change to stop these damn blue screens??

    where is the renowned and intriguingly named LSDMEASAP???

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •