Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: EX58-UD5 and 960 problems, please help




  1. #11
    GiggaByte is offline Member
    Join Date
    Dec 2007
    Location
    Canada
    Posts
    174

    Default Re: EX58-UD5 and 960 problems, please help

    Can you post the settings that did the "best" if you remember them? What CPU/IOH skews have you tried and are any of your BSODs 0x0000009c machine_check_exception?

  2. #12

    Default Re: EX58-UD5 and 960 problems, please help

    I can post the template that worked with HT when it was on Bios F9 and very first assembled, about a week later it just was unstable with HT on:


    Code:
    All Fields Omitted, are set to Automatic Optomised Defaults.
    
    > MB Intel M.I.T:
    CPU C1E.......................[Disabled]
    C3/6/7 State..................[Disabled]
    CPU Thermal Mon...............[Disabled]
    CPU EIST Funct................[Disabled]
    
    > Uncore & QPI Features:
    QPI Link Speed................[x44] (5.86Ghz)
    Uncore Frequency..............[x24] (3.200Ghz)
    Isochronous Support...........[Enabled]
    
    
    > Advanced Clock Control:
    Base Clock Control............[Disabled]
    PCI-E Frequency...............[Auto] (100Mhz)
    CPU CLock Drive...............[800mV] (auto setting)
    PCI Express clock drive.......[900mV] (auto setting)
    
    <MB Intel M.I.T
    Peformance Enhance............[Standard]
    XMP Profile...................[Profile1]
    Memory Multi (SPD)............[Auto] (1600Mhz)
    
    > Advanced DRAM Features:
    
    DRAM Timing...................[Manual]
    CAS...........................[7] (XMP SPD@ 8)
    tRCD..........................[8] (XMP SPD@ 7)
    tRP...........................[7] (XMP SPD@ 8)
    CMD Rate......................[AUto] (2T)
    Note: Banks B and C same as above.
    
    > Advanced Voltage Control:
    
    Loadline.......................[Disabled]
    CPU Vcore......................[Auto] (1.25625v)
    QPI/Vtt Voltage................[1.215V]
    CPU PLL........................[AUto] (1.800v)
    
    >>> MCH / ICH
    PCIE...........................[Auto] (1.500v)
    QPI PLL........................[Auto] (1.100v) <- May need raising to 1.2v
    IOH Core.......................[Auto] (1.100v) <- Can be raised up to 1.2v
    ICH I/O........................[AUTO] (1.500v)
    ICH Core.......................[1.200v] (1.100v)
    
    >>> DRAM
    DRAM Voltage...................[1.66v]
    DRAM Termination...............[Auto]
    ----
    
    > Standard CMOS Features:
    Drive A........................[None]
    
    > Advanced BIOS Features:
    HDD S.M.A.R.T..................[Enabled]
    Init Display First.............[PCIE x16-1]
    
    > Intergrated Peripherals:
    SATA RAID/ACHI.................[AHCI]
    SATA Port0-3 Native............[Enabled]
    USB Keyboard...................[Enabled]
    USB Storage....................[Disabled]
    Onboard SATA/IDE Device........[Disabled]
    
    > Power Management Setup:
    ACPI Suspend Type..............[S3(STR)]
    Soft-Off by PWR-BTTN...........[Delay 4 Sec.]
    
    
    
    PC Health Status:
    
    VCore...........................1.236V
    DDR15...........................1.648V
    +5V.............................5.053V
    All Settings Including smart fan control Disabled
    it was fine like this since assembly for over a week then the HT just stopped being stable.
    I don't see any configuration that will let it run with HT enabled, without playing around with the bclk/multi and skews (which Im not keen on doing).

    the main BSOD it got was 0x00000101, and most of the time, it would suffer hard lockup anywhere with HT enabled, and occasionally it would halt at the windows log in screen for a minute then the screen would go completely black.

    the most bizzarre part is with HT disabled, its rock solid, it will linpack even without any residual norm discrepancies whatsoever. :S
    Last edited by qwertylesh; 03-15-2010 at 10:51 AM.
    Gaming: GIGABYTE X58-UD5 - i7 920 C0 - Noctua NH-U12P - 6GB OCZ Platinum PC3-10666 CL7 - Sapphire HD5870 - Antec P182 - TruePower Trio 650w - 3 Acer X243HB in Eyefinity - 2 x 500GB ST3500320AS 7200.11, SD1A - MS Digital Media KB - Windows 7 Ultimate x64

    Server: - HP Proliant MicroServer N36L - 4GB Team 1333 CL9 - 1x 160 2.5 5400RPM - 2x 500GB ST3500320AS 7200.11, SD1A - 1x 250GB ST3500320AS 7200.12 - 1x 1.5TB ST3500320AS 7200.12

    HTPC1
    : GIGABYTE EP45-UD3L - E7600 - 2GB Corsair DHX 800 C5 - GIGABYTE 8500GT - Antec Fusion - Microsoft Comfort Wireless / Logitech MX1000 bt - Windows 7 Ultimate x64

    HTPC2
    : GIGABYTE 945GCMX-S2 - E6320 - 2GB Corsair DHX 800 C5 - GIGABYTE 7600GT - Antec Fusion - Windows 7 Ultimate x64


    HTPC3:
    GIGABYTE P35-DS4 - E6750 - 4GB OCZ System Elite 800 - GIGABYTE 8800GTX - TT Shark - Earthwatts 500w - DeNovo Mini - Windows 7 Ultimate x64

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •