Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 22

Thread: Ep45-ud3p / e8500 /f2-8500l5d help!




  1. #11
    Join Date
    Mar 2010
    Location
    Houston, TX
    Posts
    10

    Default Re: Ep45-ud3p / e8500 /f2-8500l5d help!

    I have the latest version installed, but it doesn't seem to want to start. I just get an hour class for a few seconds and then nothing. I may have to try re-installing. I have only run the intel burn test with no errors.
    E8500
    EP45-UD3P [rev: 1.6] ~ Bios: FE
    4GB (2 x 2GB) G.SKILL F2-8500CL5D
    EVGA GTX 260 OC
    Zalman 9700
    Corsair 620HX
    Antec nine hundred

  2. #12
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Ep45-ud3p / e8500 /f2-8500l5d help!

    Check ypur system tray, ET6 starts minimized.
    Run some Prime95 blend also.
    What are core temps during IBT run?

  3. #13
    Join Date
    Mar 2010
    Location
    Houston, TX
    Posts
    10

    Default Re: Ep45-ud3p / e8500 /f2-8500l5d help!

    Doh.. just realized to check system tray before I saw your post. Thanks. I will run the tests requested. Thanks.

    Temps during IBT where between 44C and 46C

    Attachment 2320
    Last edited by Soap; 03-18-2010 at 08:54 AM. Reason: added temps
    E8500
    EP45-UD3P [rev: 1.6] ~ Bios: FE
    4GB (2 x 2GB) G.SKILL F2-8500CL5D
    EVGA GTX 260 OC
    Zalman 9700
    Corsair 620HX
    Antec nine hundred

  4. #14
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ep45-ud3p / e8500 /f2-8500l5d help!

    It also looks to me like XMP is possibly enabled, or mnore likely you are not setting your own main timings (Have them on AUTO I mean 577-20)

  5. #15
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Ep45-ud3p / e8500 /f2-8500l5d help!

    Yeah XMP is probebly on default auto, the 5-7-7-20 is the result of Performence Enhance Turbo with auto timings, but it also set tRD lower than with Standard..

  6. #16
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Ep45-ud3p / e8500 /f2-8500l5d help!

    Chike, thanks for filling in.

    Which stability tests did you run and for how long?

    Save your current bios settings as a saved bios profile using F11 at the main bios screen. Type in a meaningful bios name, such as DEFAULT-333. If you need to reload this profile later, press F12 at the main bios screen and highlight the bios name that you want to load, and then press ENTER. When you press F10 to save settings and exit, your loaded profile will be applied.

    It's best to post your bios settings and the screen-shot after you have completed your tests.

    Let us know when you're ready and we can go to 3.6 or 3.8GHz.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  7. #17
    Join Date
    Mar 2010
    Location
    Houston, TX
    Posts
    10

    Default Re: Ep45-ud3p / e8500 /f2-8500l5d help!

    IBT was run on HIGH for 3 passes with no errors. Prime95 blend was run for about 5 hours with no errors. I am ready to move forward. Thanks again to everyone for taking your personal time to post here and help me with this. I do appreciate your help.
    E8500
    EP45-UD3P [rev: 1.6] ~ Bios: FE
    4GB (2 x 2GB) G.SKILL F2-8500CL5D
    EVGA GTX 260 OC
    Zalman 9700
    Corsair 620HX
    Antec nine hundred

  8. #18
    Join Date
    Mar 2010
    Location
    Houston, TX
    Posts
    10

    Default Re: Ep45-ud3p / e8500 /f2-8500l5d help!

    bump...
    E8500
    EP45-UD3P [rev: 1.6] ~ Bios: FE
    4GB (2 x 2GB) G.SKILL F2-8500CL5D
    EVGA GTX 260 OC
    Zalman 9700
    Corsair 620HX
    Antec nine hundred

  9. #19
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Ep45-ud3p / e8500 /f2-8500l5d help!

    Try 3.2,3.6G-3.8GHzHz with 400MHz FSB, then higher FSB if you wish.
    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------------- : [Auto]
    CPU Clock Ratio ---------------------- : [8x]
    Fine CPU Clock Ratio ----------------- : [+0.0]
    CPU Frequency ---------------------: 3.2
     
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control --------------- : [Enabled]
    CPU Host Frequency (Mhz) --------------: [400Mhz]
    PCI Express Frequency (Mhz) ---------- : [100]
     
    C.I.A.2 ------------------------------ : [Disabled]
     
    Advanced Clock Control ------- [Press Enter]
    CPU Clock Drive ---------------------- : <<< 800
    PCI Express Clock Drive -------------- : <<< 900
    CPU Clock Skew (ps) ------------------ : <<<
    MCH Clock Skew (ps) ------------------ : <<<
     
    DRAM Performance Control
    Performance Enhance ------------------- : [Standard] 
    Extreme Memory Profile --- (X.M.P.) --- : [Profile 1] 
    (G)MCH Frequency Latch ---------------- : [Auto]
    System Memory Multiplier -------------- : [2.66D]
    Memory Frequency (Mhz) ---------------- : [Auto] 1066
    DRAM Timing Selectable ---------------- : [Auto] 
     
    Standard Timing Control
    CAS Latency Time -------- 5 ---------- : [Auto]
    tRCD  ------------------- 7 ---------- : [Auto]
    tRP --------------------- 7 ---------- : [Auto]
    tRAS  ------------------- 20 ---------- : [Auto]
     
    Advanced Timing Control
    tRRD  ------------------- 4 ---------- : [Auto]
    tWTR  ------------------- 4 ---------- : [Auto]
    tWR --------------------- 8 ---------- : [Auto]
    tRFC  ------------------- 68 ---------- : [Auto]
    tRTP  ------------------- 4 ---------- : [Auto]
    Command Rate (CMD) -------------------- : [2] 
     
    Driving Strength Profiles
    Driving Strength --------- : Press Enter <--- press ENTER to modify memory sub-timings when overclocking
     
    Channel A
    Static tRead Value --------------------- : [10]
    tRD Phase0 Adjustment ------------------ : [Auto] 
    tRD Phase1 Adjustment ------------------ : [Auto]
    tRD Phase2 Adjustment ------------------ : [Auto]
    tRD Phase3 Adjustment ------------------ : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ----------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ----------------- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto]  ps
    Dimm2 Clock Skew Control --------------- : [Auto]  ps
     
    Channel B
    Static tRead Value --------------------- : [10]
    tRD Phase0 Adjustment ------------------ : [Auto]
    tRD Phase1 Adjustment ------------------ : [Auto]
    tRD Phase2 Adjustment ------------------ : [Auto]
    tRD Phase3 Adjustment ------------------ : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ----------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ----------------- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto]  ps
    Dimm2 Clock Skew Control --------------- : [Auto]  ps
     
    Motherboard Voltage Control
    CPU
    Voltage Types------------ Normal -------- Current -----
    Load-Line Calibration ----------------- : [Disabled]
    CPU Vcore --------------- 1.30  ------- : [1.3] <<< add more as needed
     
    CPU Termination --------- 1.200V* ----- : [1.200] <<< 1.22-1.24v may be needed
    CPU PLL ----------------- 1.500V* ----- : [1.500] 
     
    CPU Reference ----------- 0.760V* ----- : [Auto]
    CPU Reference2 ---------- 0.800V* ----- : [Auto]
     
    MCH/ICH
    MCH Core ---------------- 1.100V ------- : [1.200V] <<< 1.22-1.26v may be needed
    MCH Reference ----------- 0.760V ------- : [Auto]
    MCH/DRAM Ref ------------ 0.900V  ------ : [Auto]
    ICH I/O ----------------- 1.500V ------- : [1.500]
    ICH Core ---------------- 1.100V ------- : [1.100]
    DRAM
    DRAM Voltage ------------ 1.800V ------- : [Auto]
    DRAM Termination -------- 0.900V ------- : [Auto]
    Channel A Reference ----- 0.900V ------- : [Auto]
    Channel B Reference ----- 0.900V ------- : [Auto]
     
    Advanced Settings
    Limit CPUID Max. to 3 ------------------ : [Disabled]
    No-Execute Memory Protect -------------- : [Enabled]
    CPU Enhanced Halt (C1E) ---------------- : [Disabled]
    C2/C2E State Support ------------------- : [Disabled]
    x C4/C4E State Support ----------------- : [Disabled]
    CPU Thermal Monitor 2 (TM2) ------------ : [Enabled]
    CPU EIST Function  --------------------- : [Disabled]
    Virtualization Technology -------------- : [Disabled]
     
    Integrated Peripherals
    Legacy USB Storage Detect  ------------- : [Enabled]
    Begin with CPU Ratio 8, run a few memtest86+ before running Windows then a few hours Prime95 customized blend (select blend, select custom, set Min FFT size to 128k) to make sure memory/MCH settings are ok, then increase CPU Ratio to 9, then 9.5.
    The higher CPU frequency will probably require more vcore.
    You can try to use LLC(Load Line Calibration), a disputable feature, so decide for yourself.

  10. #20
    Join Date
    Mar 2010
    Location
    Houston, TX
    Posts
    10

    Default Re: Ep45-ud3p / e8500 /f2-8500l5d help!

    I made the above changes and when running Prime95 worker#1 failed about 6 minutes in with the below error. I then switched back to my default settings and received the same error still. Not sure why I did not receive this error when I originally ran the tests. Any ideas?

    [Mar 20 18:02] FATAL ERROR: Rounding was 0.5, expected less than 0.4
    [Mar 20 18:02] Hardware failure detected, consult stress.txt file.
    [Mar 20 18:02] Torture Test ran 6 minutes - 1 errors, 0 warnings.
    [Mar 20 18:02] Worker stopped.
    Last edited by Soap; 03-21-2010 at 09:28 AM.
    E8500
    EP45-UD3P [rev: 1.6] ~ Bios: FE
    4GB (2 x 2GB) G.SKILL F2-8500CL5D
    EVGA GTX 260 OC
    Zalman 9700
    Corsair 620HX
    Antec nine hundred

Page 2 of 3 FirstFirst 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •