Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 9 of 27 FirstFirst ... 789101119 ... LastLast
Results 81 to 90 of 264

Thread: GV-R587UD-1GD Problems




  1. #81
    Join Date
    Nov 2009
    Location
    israel
    Posts
    262

    Default Re: GV-R587UD-1GD Problems

    what should i use
    currently iam using 10
    so what do i have to do
    iam asking my self why this retarted company put me in an complicated situation to fix by my self this damn problem

  2. #82
    Join Date
    Mar 2010
    Location
    UK
    Posts
    282

    Default Re: GV-R587UD-1GD Problems

    Was just checking, Im using 10.3b currently.

    Im having a difficult time working out what your clocks are as the profile you uploaded was different to what you said your idle clocks was. Your problem originally was that one clock wouldnt go above 600mhz, but now your clocks have different settings?

  3. #83
    Join Date
    Nov 2009
    Location
    israel
    Posts
    262

    Default Re: GV-R587UD-1GD Problems

    jesus christ thanks god my problem was solved i update it to 10.3 and put the 500 mhz

  4. #84
    Join Date
    Apr 2010
    Location
    PL
    Posts
    50

    Default Re: GV-R587UD-1GD Problems

    I use CCC drivers 10.4 preview on Win 7 x64 from here -->> ATICatalyst10.4Preview

    Regards,

  5. #85
    Join Date
    Mar 2010
    Location
    UK
    Posts
    282

    Default Re: GV-R587UD-1GD Problems

    10.3 to 10.4 is the same bar a BC2 fix.

    Gasan - Problem fixed then? The whole range of 10.x drivers have that power saving feature so are your idle clocks still low?

    Payti - So what is your current problem, can you explain it again and post up your idle speeds as shown in CCC under overdrive.

  6. #86
    Join Date
    Mar 2010
    Location
    UK
    Posts
    282

    Default Re: GV-R587UD-1GD Problems

    Ok well i sorta see the problem with new beta drivers that you have. This is a newer version of the 10.4's as it also has ATI's 2d fix, though they seem to have gone from one extreme to the next.

    Their new 2d idle clocks seem rather high, on the mem anyway. When i get round to installing these ill def be setting the 2d clocks lower than they have.

    Seems some people are having their 2d clocks go back to normal on the above drivers when overdrive is not enabled, however until i test for myself i cant really comment on that.

    Still a bit lost to if your having any probs or not?
    Last edited by SB420; 04-22-2010 at 09:30 AM.

  7. #87
    Join Date
    Apr 2010
    Location
    PL
    Posts
    50

    Default Re: GV-R587UD-1GD Problems

    Ok, my problem in 2D mode solved - both cards now have @157 MHz on GPU - OK.

    Problem which still exist - after few minutes 3D gameing on GPU1 (master) clock core stay @600MHz. On GPU2 core (linked to master) stay OK @850MHz (no overclocked cards).
    On first card GPU1 (master) temps are 89-91 'C and on second (linked) temps are 75-80 'C. Could be possible downclock GPU to @600MHz by temperatures ?

    Temps I observe on G15 LCD display configured with MSI Afterburner.

    Regards,
    Last edited by Payti; 04-22-2010 at 05:21 PM.

  8. #88
    Join Date
    Mar 2010
    Location
    UK
    Posts
    282

    Default Re: GV-R587UD-1GD Problems

    Seems weird it wont go over 600mhz, what about if running a benchtest?

  9. #89
    Join Date
    Nov 2009
    Location
    israel
    Posts
    262

    Default Re: GV-R587UD-1GD Problems

    payti :try to flash the bios of graphic card or check on ccc and vadilate gpu 1 clock

  10. #90
    Join Date
    Apr 2010
    Location
    PL
    Posts
    50

    Default Re: GV-R587UD-1GD Problems

    @SB420: The same in Furmark 1.8.2. Probably is the temperature problem. I must down temps on card with new cooler above card and check then ....
    @gasan: I have flashed last F6A bios from Gigabyte site.

    Regards,

Page 9 of 27 FirstFirst ... 789101119 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •