Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: EP45-UD3P & E8400 at 4.5Ghz 24/7




  1. #1

    Default EP45-UD3P & E8400 at 4.5Ghz 24/7

    Here is what the rig in my sig has been running at for almost a year now.

    EP45-UD3P

    E8400 EO

    2X2048 GSkill f2-8000cl5d [/size]

    BFG GTX280, 675/1024 163.44 drivers

    4 X Barracuda SATA 7200.10 250GB RAID 0

    Benq DW 1655 DVD

    PC Power & Cooling Quad Silencer 750W

    ==========

    [code]MB Intelligent Tweaker(M.I.T.)
    ******************************
    Robust Graphics Booster ..............: [A]
    CPU Clock Ratio ......................: [9X]
    x Fine CPU Clock Ratio................: +0.0
    CPU Frequency ........................: 4.5GHz( 500x9)
    ********** Clock Chip Control ********
    >>>>> Standard Clock Control
    CPU Host Clock Control................: [Enabled]
    x CPU Host Frequency(Mhz).............: [500]
    PCI Express Frequency(Mhz)............: [100]
    C.I.A.2...............................: [Disabled]
    >>>>> Advanced Clock Control..........: [Press Enter]
    CPU Clock Drive.......................: [800mV]
    PCI Express Clock Drive...............: [900mV]
    CPU Clock Skew........................: [ 0ps]
    MCH Clock Skew........................: [ 0ps]
    ******** DRAM Performance Control ********
    Performance Enhance...................: [Standard]
    Extreme Memory Profile(X.M.P.)........: [Disabled]
    (G)MCH Frequency Latch................: [Auto]
    System Memory Multiplier (SPD)........: [2.00D]
    Memory Frequency(Mhz).....800.........: 1000
    DRAM Timing Selectable (SPD)..........: [Manual]
    >>>>> Standard Timing Control
    x CAS Latency Time................5...: [ 5]
    x tRCD ...........................5...: [ 5]
    x tRP.............................5...: [ 5]
    x tRAS...........................18...: [15]
    >>>>> Advanced Timing Control.........: [Press Enter]
    x tRRD............................3...: [ 3]
    x tWTR............................3...: [ 3]
    x tWR.............................6...: [ 1]
    x tRFC...........................52...: [54]
    x tRTP............................3...: [ 4]
    x Command Rate (CMD) .............0...: [ A]
    >>>>> Channel A Timing Settings.......: [Press Enter]
    x Static tRead Value.............10...: [ 9]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    >>>>> Channel A Driving Settings......: [Press Enter]
    x Driving Strength Profile............: Auto
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    >>>>> Channel B Timing Settings.......: [Press Enter]
    x Static tRead Value.............10...: [ 9]
    x tRD Phase0 Adjustment...........0...: Auto
    x tRD Phase1 Adjustment...........0...: Auto
    x tRD Phase2 Adjustment ..........0...: Auto
    x tRD Phase3 Adjustment...........0...: Auto
    x Trd2rd(Different Rank)..........6...: Auto
    x Twr2wr(Different Rank)..........6...: Auto
    x Twr2rd(Different Rank)..........5...: Auto
    x Trd2wr(Same/Diff Rank)..........8...: Auto
    x DIMM1 Clock Skew Control (ps).......: Auto
    x DIMM2 Clock Skew Control (ps).......: Auto
    x DDR Write Training..................: Auto
    >>>>> Channel B Driving Settings......: [Press Enter]
    x Driving Strength Profile............: Auto
    x Data Driving Pull-Up Level..........: Auto
    x Cmd Driving Pull-Up level...........: Auto
    x Ctrl Driving Pull-Up Level..........: Auto
    x Clk Driving Pull-Up Level...........: Auto
    x Data Driving Pull-Down Level........: Auto
    x Cmd Driving Pull-Down level.........: Auto
    x Ctrl Driving Pull-Down Level........: Auto
    x Clk Driving Pull-Down Level.........: Auto
    ****** Motherboard Voltage Control ******
    Voltage Types..........Normal...........Current
    -----------------------------------------------
    >>> CPU
    Load-Line Calibration.................: [Enabled]
    CPU Vcore..............1.27500V.......: [1.38V]
    CPU Termination........1.200V.........: [1.300V]
    CPU PLL................1.500V.........: [1.650V]
    CPU Reference..........0.760V.........: [.72]
    >>> MCH/ICH
    MCH Core...............1.100V.........: [1.380V]
    MCH Reference..........0.760V.........: [.72]
    MCH/DRAM Reference.....0.900V.........: [1.05]
    ICH I/O................1.500V.........: [1.500V]
    ICH Core...............1.100V.........: [1.100V]
    >>> DRAM
    DRAM Voltage...........1.800V.........: [2.10V]
    DRAM Termination.......0.900V.........: [1.05]
    Channel A Reference....0.900V.........: [1.05]
    Channel B Reference....0.900V.........: [1.05]
    ******** Advanced BIOS Features ********
    Hard Disk Boot Priority...............: [Press Enter]
    First Boot Device.....................: [Hard Disk]
    Second Boot Device....................: [Disabled]
    Third Boot Device.....................: [Disabled]
    Password Check........................: [Setup]
    HDD S.M.A.R.T. Capability.............: [Enabled]
    Limit CPUID Max. to 3.................: [Disabled]
    No-Execute Memory Protect.............: [Enabled]
    CPU Enhanced Halt (C1E)...............: [Disabled]
    C2/C2E State Support..................: [Disabled]
    x C4/C4E State Support................: Disabled
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.....................: [Disabled]
    Virtualization Technology.............: [Disabled]
    Delay For HDD (Secs)..................: [ 0]
    Full Screen LOGO Show.................: [Disabled]
    Init Display First....................: [PEG]
    ******** Integrated Peripherals ********
    USB Keyboard Function.................: [Enabled]
    USB Mouse Function....................: [Enabled]
    USB Storage Function..................: [Disabled]

    ==========



    short description:
    500 X 9 = 4.5GHz, 1.38 cpu voltages
    5-5-5-15 @ 2.10v vdimm




    Getting ready to build a new 1156 rig, and will be selling the E8400, Memory and board. Will be posted in the For Sale section at Extreme Systems in a week or so. Of course, a PM on this site would work too.
    i7 3770K, 47X100= 4.7GHz at 1.33V, ASROCK Z77 Extreme4, 2 X 4GB Patriot Viper Black Maba DDR3 1600, GTX 590, 2 X Corsair Force 3 120GB SSDs in RAID 0, Barracuda SATA 7200.10 500GB, Barracuda SATA 7200.11 1000GB Back Ups, OCZ ZX 1250W, Z-5500s, LG Blu Ray Player/DVD Burner, Koolance CTR-CD12 Fan/Pump Controller, Windows 7 X64 Professional, HAF X. Vision Quest 24" WS LCD, Optoma H66 Projector
    Cooling: Thermochill PA120.2 GT AP15 in push, DDC 3.25/XSPC Res top, Apogee Xt Extreme, XSPC Razor, Coolgate CG-240 Swiftech Helix in push/pull, MCP35X.

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45-UD3P & E8400 at 4.5Ghz 24/7

    So just promotion and helping others with settings right?

    I mean your all good here, no help needed right? Checking to be sure. We do have a for sale section here, which you could also copy your XS post to once you put it up, if you wanted.

  3. #3

    Default Re: EP45-UD3P & E8400 at 4.5Ghz 24/7

    Exactly right. I wanted to post what I was able to do to provide data and to show the worthiness of the gear.
    I don't see a For Sale section. Did it disappear with the remake?
    i7 3770K, 47X100= 4.7GHz at 1.33V, ASROCK Z77 Extreme4, 2 X 4GB Patriot Viper Black Maba DDR3 1600, GTX 590, 2 X Corsair Force 3 120GB SSDs in RAID 0, Barracuda SATA 7200.10 500GB, Barracuda SATA 7200.11 1000GB Back Ups, OCZ ZX 1250W, Z-5500s, LG Blu Ray Player/DVD Burner, Koolance CTR-CD12 Fan/Pump Controller, Windows 7 X64 Professional, HAF X. Vision Quest 24" WS LCD, Optoma H66 Projector
    Cooling: Thermochill PA120.2 GT AP15 in push, DDC 3.25/XSPC Res top, Apogee Xt Extreme, XSPC Razor, Coolgate CG-240 Swiftech Helix in push/pull, MCP35X.

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: EP45-UD3P & E8400 at 4.5Ghz 24/7

    I thought that may be what you were doing, just thought I'd check to be sure.

    Hmm, yes it appears the for sale section and several others that were rarely used are now unavailable to members. Sorry, I did not notice that until you mentioned it.

    Ohh well I am sure you will have plenty of viewers on your sale at XS, if not also copy to OCN if you have enough Rep as their for sale section gets plenty of traffic.

    Good luck with the sale!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •