Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 5 of 6 FirstFirst ... 3456 LastLast
Results 41 to 50 of 53

Thread: HELP! UD3P+QX6700+Corsair 2x2048-8500C5D keeps crashing please help tryed everything




  1. #41
    Join Date
    Mar 2010
    Location
    United States
    Posts
    23

    Default Re: HELP! UD3P+QX6700+Corsair 2x2048-8500C5D keeps crashing please help tryed everyth

    well i just lost my raid in the process sigh... anyway where can i tell if the mem is running at 1066
    QX6700 @ 2.66GHz [10x266MHz] ----------------- Zalman 9700
    EP45-UD3P [rev: 1.6] ~ Bios: FE
    4x2GB Corsair Dominator TWIN2x2048-8500C5D @5-5-5-15 2.1v @800Mhz
    NVIDIA GEFORCE GTX 260
    Enermax Galaxy 1000w
    Soundblaster X-FI Fatality Edition
    Lian-Li PC2000 Plus
    WD Velocial Raptor 150GB
    Windows 7 64Bit

  2. #42
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: HELP! UD3P+QX6700+Corsair 2x2048-8500C5D keeps crashing please help tryed everyth

    MemSet main window ot CPU-Z memory tab. EasyTune HWMonitor for voltage.

    RAID lost? was it your system drive? If not can't it be rebuilt?

  3. #43
    Join Date
    Mar 2010
    Location
    United States
    Posts
    23

    Default Re: HELP! UD3P+QX6700+Corsair 2x2048-8500C5D keeps crashing please help tryed everyth

    After i went to opt defaults went back into windows forgot to change it back to raid after i loaded defaults and it changed two of the drives to non-raid disks and i dont know how to turn them back they were in raid 5
    QX6700 @ 2.66GHz [10x266MHz] ----------------- Zalman 9700
    EP45-UD3P [rev: 1.6] ~ Bios: FE
    4x2GB Corsair Dominator TWIN2x2048-8500C5D @5-5-5-15 2.1v @800Mhz
    NVIDIA GEFORCE GTX 260
    Enermax Galaxy 1000w
    Soundblaster X-FI Fatality Edition
    Lian-Li PC2000 Plus
    WD Velocial Raptor 150GB
    Windows 7 64Bit

  4. #44
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: HELP! UD3P+QX6700+Corsair 2x2048-8500C5D keeps crashing please help tryed everyth

    How many were in the RAID 3?
    I'm not familiar with RAID configurations, sorry.

  5. #45
    Join Date
    Mar 2010
    Location
    United States
    Posts
    23

    Default Re: HELP! UD3P+QX6700+Corsair 2x2048-8500C5D keeps crashing please help tryed everyth

    Had 3 drives in raid 5
    QX6700 @ 2.66GHz [10x266MHz] ----------------- Zalman 9700
    EP45-UD3P [rev: 1.6] ~ Bios: FE
    4x2GB Corsair Dominator TWIN2x2048-8500C5D @5-5-5-15 2.1v @800Mhz
    NVIDIA GEFORCE GTX 260
    Enermax Galaxy 1000w
    Soundblaster X-FI Fatality Edition
    Lian-Li PC2000 Plus
    WD Velocial Raptor 150GB
    Windows 7 64Bit

  6. #46
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: HELP! UD3P+QX6700+Corsair 2x2048-8500C5D keeps crashing please help tryed everyth

    With RAID 5 you should be able to rebuild. If you do not have Intel Matrix Storage Manager installed please install it now, then when you open the program it should tell you it will rebuild the array.
    http://downloadcenter.intel.com/Sear...torage+Manager

    Of course you need to set the BIOS back to RAID if you did not already, then the program should do the rest for you.

    To check what speed your memory is running you can use CPU-z, look in the Memory tab (NOT SPD) and see what it says. If it says 533Mhz then that is 1066
    http://www.cpuid.com/cpuz.php
    Last edited by Lsdmeasap; 03-27-2010 at 08:03 PM.

  7. #47
    Join Date
    Mar 2010
    Location
    United States
    Posts
    23

    Default Re: HELP! UD3P+QX6700+Corsair 2x2048-8500C5D keeps crashing please help tryed everyth

    K. I ran tests on channels A and B with 2 sticks in each then i swapped for the other two sticks. Both passed IBT Standard, High, and Maximum. Is there any additional testing i need to do before i try and boot with all 4 sticks. If not then what setting do you recommend i boot all 4 sticks with.
    QX6700 @ 2.66GHz [10x266MHz] ----------------- Zalman 9700
    EP45-UD3P [rev: 1.6] ~ Bios: FE
    4x2GB Corsair Dominator TWIN2x2048-8500C5D @5-5-5-15 2.1v @800Mhz
    NVIDIA GEFORCE GTX 260
    Enermax Galaxy 1000w
    Soundblaster X-FI Fatality Edition
    Lian-Li PC2000 Plus
    WD Velocial Raptor 150GB
    Windows 7 64Bit

  8. #48
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: HELP! UD3P+QX6700+Corsair 2x2048-8500C5D keeps crashing please help tryed everyth

    With 8GB of memory, I suggest that you start with your memory at 800MHz using 4-4-4-12 primary timings. MCH Core voltage will probably require 1.22 - 1.26 volts, with tRFC in the mid 50 range.

    Some systems can run 1066 memory speeds, others have to run with memory speeds in the 900 - 1000MHz range. MCH Core at higher memory speeds often requires MCH Core voltage in the 1.28 - 1.32 range. Once your system is stable at 800MHz, you can try the 4.00A memory multiplier, with higher MCH Core voltage and 5-5-5-15 timings to quickly see if you can run your memory at 1066MHz. At 800MHz, tRFC = 52 - 56 should be stable. At 1066MHz, tRFC = 72 - 74 should be stable.

    Your best overall system performance will be with higher cpu speeds, even if you need to run somewhat lower memory speeds.
    Most games or applications will have nearly identical performance with 800MHz and 4-4-4-12 timings versus 1066MHz and 5-5-5-15 timings.

    You should post your most recent bios settings and full screen-shot after each test so that we know exactly what settings were used, so that we can best advise what bios changes will be needed for the next step. Be sure to post core temperatures during your stress testing, along with detailed error messages.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  9. #49
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: HELP! UD3P+QX6700+Corsair 2x2048-8500C5D keeps crashing please help tryed everyth

    Have you tested all slots or jusr 1 & 3?

  10. #50
    Join Date
    Feb 2010
    Location
    Chambersburg, PA
    Posts
    103

    Default Re: HELP! UD3P+QX6700+Corsair 2x2048-8500C5D keeps crashing please help tryed everyth

    Mornin ExoD...

    I've been following your thread as we seem to have similar setups (same CPU anyway)
    The kind folks here have helped me for the last couple of weeks dialing in settings to achieve almost the same thing you're going for.
    I feel your pain on how hot these chips run. I can't even entertain the thought of OC beyond 2.93Ghz which is only 1 bump on the multiplier.
    At 2.93Ghz and 8GB of OCZ PC9200 running at 1066 I just completed 9-10 hours of Prime95 Blend with no errors and Memtest for 3hrs with no errors! wOOt!
    Anyway I thought I'd share where we've landed so far in BIOS settings in case there's anything here that may help.

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 11x
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 2.93GHz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Disabled]
    CPU Host Frequency (Mhz) ............: 266 Mhz
    PCI Express Frequency (Mhz) .........:100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<< 0ps
    MCH Clock Skew (ps)...................: <<< ops


    DRAM Performance Control
    Performance Enhance...................: Standard
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 4.00B
    Memory Frequency (Mhz) ..............: 1066
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................6
    tRCD .........................................6
    tRP'...........................................6
    tRAS..........................................20



    Advanced Timing Control
    tRRD...........................................4
    tWTR.......................................... 4
    tWR............................................ 8
    tRFC........................................... 72
    tRTP........................................... 4
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................ 1066

    Channel A
    Static tRead Value.........................:8
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................: 8
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control

    CPU
    CPU Vcore….……….........................:1.35
    CPU Termination…..... 1.200V*.......: 1.225
    CPU PLL…………………....1.500V*.......: 1.5
    CPU Referen.…………....0.755V*.......: Auto

    CPU Reference2………,,0.800V*.......:Auto

    MCH/ICH
    MCH Core…………….....1.100V...........: 1.26
    MCH Reference….…….0.760V...........; [Auto]
    MCH/DRAM Ref.…......0.900V...........: [Auto]
    ICH I/O……………….....1.500V............: 1.5
    ICH Core…………...……1.100V............: 1.14

    DRAM
    DRAM Voltage ……....1.800V............: 2.1
    DRAM Termination .…0.900V............: [Auto]
    Channel A Reference 0.900V............: [Auto]
    Channel B Reference 0.900V............: [Auto]

    Obviously, these guys might have different recommendations so by all means go with what they say. I'm only posting my results as a comparison to try to help.
    I'm just stoked it's finally running stable with all 8GB RAM.

    What cooling solution are looking at? I'm hoping to get the Swiftech H2O-220 Ultima XT, but another member here recommended I scrap liquid cooling and just get a different CPU (Q9550 or something similar).
    I see the point, but am kinda partial to the eye candy the liquid offers. :) Not sure yet which way to go...it'll be a little bit till I have the $300 to throw at the problem.

    Good luck with yer system!


    Thermaltake Level 10 GT Snow Edition
    ASUS Maximus Extreme Z
    i7Core 2600k Sandy Bridge
    Swiftech H20-X20 Edge HD
    16GB Corsair Vengeance 1600
    (5) 120GB OCZ Agility 3 SSDs
    Evga GeForce GTX 580
    Ultra X4 1600W PSU
    Lite On BD Burner
    ASUS CD/DVDRW
    Creative XFi Titanium Fatal1ty Champ
    Klipsch Pro Media 5.1
    Ultra Aluminus Card Reader, eSATA, USB3.0
    Drobo (4Bay) 6TB
    Icy Dock (4Bay) 1.5TB
    Logitech G19 Keyboard
    Cyborg RAT-9 Mouse

Page 5 of 6 FirstFirst ... 3456 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •