Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 6 of 6 FirstFirst ... 456
Results 51 to 53 of 53

Thread: HELP! UD3P+QX6700+Corsair 2x2048-8500C5D keeps crashing please help tryed everything




  1. #51
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: HELP! UD3P+QX6700+Corsair 2x2048-8500C5D keeps crashing please help tryed everyth

    If you need more help, please give us the full settings you are trying then we can advise back.

    I say that, because I am a bit behind in threads today, so I thought you may already have started tweaking and overclocking. So just wanted to see where you are already now before advising.

  2. #52
    Join Date
    Mar 2010
    Location
    United States
    Posts
    23

    Default Re: HELP! UD3P+QX6700+Corsair 2x2048-8500C5D keeps crashing please help tryed everyth

    Tested Slots 1/3 and 2/4 with both sets of ram. They passed all the IBT tests standard, High, and Max.
    Max Temp was 151 on the IBT Stress Tests.
    Jerm -- Thanks for your post i will check those settings if i can get these to work.
    These are my current settings below with screens.

    Attachment 2363


    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 10x
    CPU Frequency ...........................: 2.66 (266x10)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 266
    PCI Express Frequency (Mhz) .........: 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800Mv
    PCI Express Clock Drive.................: 900mV
    CPU Clock Skew (ps)....................: 0
    MCH Clock Skew (ps)...................: 0


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: [Disabled]
    (G)MCH Frequency Latch...............: [266 MHz]
    System Memory Multiplier ..............: 3.00A
    Memory Frequency (Mhz) ..............: 800
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................4
    tRCD .........................................4
    tRP'...........................................4
    tRAS..........................................12

    Advanced Timing Control
    tRRD...........................................4 Auto
    tWTR..........................................4 Auto
    tWR............................................8 Auto
    tRFC...........................................55
    tRTP...........................................4 Auto
    Command Rate (CMD) ....................:0 Auto

    Channel A
    Static tRead Value.........................:6
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................: Auto
    Twr2wr(Different Rank)...................: Auto
    Twr2rd(Different Rank)...................: Auto
    Trd2wr(Same/Diff Rank)..................: Auto
    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto
    DDR Write Training..........................:Auto

    Channel B
    Static tRead Value.........................:6
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................: Auto
    Twr2wr(Different Rank)...................: Auto
    Twr2rd(Different Rank)...................: Auto
    Trd2wr(Same/Diff Rank)..................: Auto
    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto
    DDR Write Training..........................:Auto


    <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>Motherboard Voltage Control

    CPU
    CPU Vcore….……….........................: 1.33750 Auto
    CPU Termination…............: 1.2 Auto
    CPU PLL…………………...........: 1.5 Auto
    CPU Reference.…………...........: 0.760 Auto

    MCH/ICH
    MCH Core……………................: 1.22
    MCH Reference….……............: 0.760 Auto
    MCH/DRAM Ref.….................: 0.900 Auto
    ICH I/O……………….................: 1.500 Auto
    ICH Core…………...……............: 1.100 Auto

    DRAM
    DRAM Voltage ……....1.800V............: 2.100
    DRAM Termination .…0.900V............: 0.900 Auto
    Channel A Reference 0.900V............: 0.900 Auto
    Channel B Reference 0.900V............: 0.900 Auto

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled]
    Virtualization Technology................: [Enabled]

    Integrated Peripherals
    USB Keyboard..................................[Enabled]
    USB Mouse......................................[Enabled]
    USB Storage....................................[Enabled]<o:p></o:p>
    QX6700 @ 2.66GHz [10x266MHz] ----------------- Zalman 9700
    EP45-UD3P [rev: 1.6] ~ Bios: FE
    4x2GB Corsair Dominator TWIN2x2048-8500C5D @5-5-5-15 2.1v @800Mhz
    NVIDIA GEFORCE GTX 260
    Enermax Galaxy 1000w
    Soundblaster X-FI Fatality Edition
    Lian-Li PC2000 Plus
    WD Velocial Raptor 150GB
    Windows 7 64Bit

  3. #53
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: HELP! UD3P+QX6700+Corsair 2x2048-8500C5D keeps crashing please help tryed everyth

    You have speedstep enabled, this is going to cause you problems most likely, even at stock sometimes this hinders performance and tweaking.

    Settings look good though aside from that

Page 6 of 6 FirstFirst ... 456

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •