Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: GA-EP43-UD3L problem :S




  1. #1
    Join Date
    Mar 2010
    Location
    earth
    Posts
    5

    Default GA-EP43-UD3L problem :S

    I have the following build:
    MB GIGABYTE GA-EP43-UD3L 775 P43 R
    CPU INTEL|PDC E6300 2.8G 2M RT
    HD 500G|SEAGATE ST3500418AS
    VGA HIS H485QT512P HD4850 512M RT
    PSU COMPUCASE|HP485D RETAIL 485W RT
    MEM 2Gx2|CRUC CT2KIT25664AA800 R

    i have no problem with any components being installed and working on this board except the ram, i put the ram in both yellow sockets (1/3) and memtest86 freezes, i put them in the red ones (2/4) it freezes. 1/4 & 2/3 also freeze, I try running each ram stick alone they are fine the pass the test. i want to note also i am able to boot fine with dual channeling but if i do anything ram intensive it will freeze.

    Also i updated my bios to f8

    I want to say also i am totally new to ram issues so i am clueless to what to do at the moment.
    Last edited by ConfusedBanana; 03-26-2010 at 10:55 AM.

  2. #2
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: GA-EP43-UD3L problem :S

    Load optimized defaults and try setting MCH Core 1.2v and Performance Enhance standard in MIT.

  3. #3
    Join Date
    Mar 2010
    Location
    earth
    Posts
    5

    Default Re: GA-EP43-UD3L problem :S

    Did 1.2 it froze up at windows log in

  4. #4
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: GA-EP43-UD3L problem :S

    Have you also set Performance enhance standard?
    Try the second stick alone in slot 3.
    Do you use memtest86 or memtest86+.
    Try downloading the latest memtest86+ from the programs sticky if it's not the one you are using.

  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-EP43-UD3L problem :S

    Please fill out a template from my signature with your current full settings you are trying, then we can advise back.

  6. #6
    Join Date
    Mar 2010
    Location
    earth
    Posts
    5

    Default Re: GA-EP43-UD3L problem :S

    CPU = E6300 Wolfdale clocked at 2.80 (stock clocks with a stock cooler)
    Motherboard = GA-EP43-UD3L 1.0 i think
    BIOS Version =F8
    Ram = MEM 2Gx2|CRUC CT2KIT25664AA800 R

    My two sticks are in 2/3 Yellow and red respectively

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................:10
    Fine CPU Clock Ratio.....................:+0.5
    CPU Frequency ...........................: 2.8(266x10.5)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Disabled]
    CPU Host Frequency (Mhz) ............:266 Mhz
    PCI Express Frequency (Mhz) .........:auto

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800
    PCI Express Clock Drive.................:800
    CPU Clock Skew (ps)....................: 0
    MCH Clock Skew (ps)...................: 0


    DRAM Performance Control
    Performance Enhance...................: [turbo]
    Extreme Memory Profile (X.M.P.).....: I do not have this setting
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: auto
    Memory Frequency (Mhz) ..............: 800
    DRAM Timing Selectable ................: [auto]

    Standard Timing Control
    CAS Latency Time........................6
    tRCD .........................................6
    tRP'...........................................6
    tRAS..........................................18

    Set all Suggested below to highest Values first. Then later you can lower, one at a time, testing as you go

    Advanced Timing Control
    tRRD...........................................3
    tWTR..........................................3
    tWR............................................6
    tRFC...........................................52
    tRTP...........................................3
    Command Rate (CMD) ....................:0

    Driving Strength Profiles
    Driving Strength ............................

    Channel A
    Static tRead Value.........................:5
    tRD Phase0 Adjustment...................:Auto 0
    tRD Phase1 Adjustment...................:Auto 0
    tRD Phase2 Adjustment .................:Auto 1
    tRD Phase3 Adjustment..................:Auto 1
    Trd2rd(Different Rank)....................:Auto 6
    Twr2wr(Different Rank)...................:Auto 6
    Twr2rd(Different Rank)...................:Auto 5
    Trd2wr(Same/Diff Rank)..................:Auto 8
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:5
    tRD Phase0 Adjustment...................:Auto 0
    tRD Phase1 Adjustment...................:Auto 0
    tRD Phase2 Adjustment .................:Auto 1
    tRD Phase3 Adjustment..................:Auto 1
    Trd2rd(Different Rank)....................:Auto 6
    Twr2wr(Different Rank)...................:Auto 6
    Twr2rd(Different Rank)...................:Auto 5
    Trd2wr(Same/Diff Rank)..................:Auto 8
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control

    CPU
    CPU Vcore….……….1.2875............:Auto no over clocking

    CPU Termination…..... 1.200V....: auto no over clocking
    CPU PLL…………………....1.500V.......: I don't have a setting for that

    CPU Referen.…………....0.805.......: auto


    MCH/ICH
    MCH Core…………….....1.100V...........:auto
    MCH Reference….…….0.760V...........; Don't see it
    MCH/DRAM Ref.…......0.900V...........: Don't see it
    ICH I/O……………….....1.550V............: auto
    ICH Core…………...……1.100V............: Don't see it

    DRAM
    DRAM Voltage ……....1.800V............:
    DRAM Termination .…0.900V............: Don't see it
    Channel A Reference 0.900V............: Don't see it
    Channel B Reference 0.900V............: Don't see it

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Enabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Enabled]
    Virtualization Technology................: [Enabled] No i don't have virtual PC, i don't even know whats that

    Integrated Peripherals
    Legacy USB Storage Detect ..............[Enabled] Its on to use memtest

  7. #7
    Join Date
    Mar 2010
    Location
    earth
    Posts
    5

    Default Re: GA-EP43-UD3L problem :S

    Anyone?

  8. #8
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: GA-EP43-UD3L problem :S

    The motherboard revision number is in the lower rear left corner near the mounting hole.
    Try setting DRAM Voltage = 1.90 volts.

    At the bios main screen screen press CONTROL + F1 before you enter the MIT section. This might show more bios options.
    Your EP43-UD3L will not display all the bios settings in the template.

    Which version of Memtest86+ are you using? Do NOT use the Memtest v3.x version.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  9. #9
    Join Date
    Mar 2010
    Location
    earth
    Posts
    5

    Default Re: GA-EP43-UD3L problem :S

    yeah revision 1.0 and i am using memtest v4.0, even without the memtest, prime95 blend test causes the lock up.

  10. #10
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: GA-EP43-UD3L problem :S

    It's not clear if you tried Chike's suggestion to test with Performance Enhance = Standard.
    Can you borrow a different pair of 2x2GB or 2x1GB memory to test with?
    Does your bios provide MCH Core options less than 1.20? Less than 1.10?

    You will make it easier for us to help you if you add a detailed list of your hardware in your forum signature.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •