Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 24 of 26 FirstFirst ... 142223242526 LastLast
Results 231 to 240 of 251

Thread: i7 930 / UD7 Overclocking advice




  1. #231
    Join Date
    Mar 2010
    Location
    UK
    Posts
    282

    Default Re: i7 930 / UD7 Overclocking advice

    Sticking? The buttons are fine, i.e. reset is reset, power works if you hold it down etc... Or are you saying sticking as in its powering it back on somehow? If the button was sticking like that wouldnt it turn it back off when i was on the net etc?

    What happens is the pc powers down completely, then after 3-4 seconds of being off just starts up on its own again and boots into windows like id turned it on, Will do this regardless of whether i press the button on the pc to turn it off or through windows

  2. #232
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: i7 930 / UD7 Overclocking advice

    it was just a thought,it seems like something is waking it up from when its turned off,you mentioned a wifi thing had installed itself? another thing you could try is to reset the cmos by removing mb battery for 30mins then re install and try
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

  3. #233
    Join Date
    Mar 2010
    Location
    UK
    Posts
    282

    Default Re: i7 930 / UD7 Overclocking advice

    is cmos likely to do much out of interest?

    Any idea what crash control auto reboot is? Seems if there is a hardware failure its set to reboot, though what failure ive occured overnight im not so sure.

  4. #234
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: i7 930 / UD7 Overclocking advice

    cmos will just reset everything sometimes its better to remove mb battery than using button on the back,set auto reboot to off and see if it fixes it
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

  5. #235
    Join Date
    Mar 2010
    Location
    UK
    Posts
    282

    Default Re: i7 930 / UD7 Overclocking advice

    Auto reboot is there for a reason though im guessing as its enabled on my flatmates pc with no probs.

    Event id shows.....

    Event ID 11 - Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications.
    Event ID 4001 - WLAN AutoConfig service has successfully stopped.
    Last edited by SB420; 04-16-2010 at 12:52 AM.

  6. #236
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: i7 930 / UD7 Overclocking advice

    it just means it will reboot if it crashes and not stay off,try with it disabled and see if it has any affect on restarting, it might still think theres an hardware error and there isnt so its worth trying,if it doesnt do anything then enable it again
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

  7. #237
    Join Date
    Mar 2010
    Location
    UK
    Posts
    282

    Default Re: i7 930 / UD7 Overclocking advice

    Ok, well i disabled it, turned it off and it still turned back on a few seconds later - am stumped :S

    Event ID 1 - Realtek PCIe GBE Family Controller is disconnected from network.
    Event ID 11 - Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications
    Event ID 4001- WLAN AutoConfig service has successfully stopped.

  8. #238
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  9. #239
    Join Date
    Mar 2010
    Location
    UK
    Posts
    282

    Default Re: i7 930 / UD7 Overclocking advice

    Thankfully the problem has now gone LSD in regards to it turning itself back off, needed a cmos reset.

    And now ive getting even further in linx at 4.2ghz as only minor adjustments seem to be needed compared to before so is all good :)

    Backed it back down to 4.0ghz (which could prob do with some minor adjustments) and temps are great. 4.2ghz was needed quite a bit more vcore sadly to not BSOD which in turn caused too much heat.

    I "believe" with LinX if it says "failed upon error" it means it wants more VTT slightly... this is what ive found so far in my testing anyway.

    Silver

  10. #240
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

Page 24 of 26 FirstFirst ... 142223242526 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •