Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 26 FirstFirst 1234513 ... LastLast
Results 21 to 30 of 251

Thread: i7 930 / UD7 Overclocking advice




  1. #21
    Join Date
    Mar 2010
    Location
    UK
    Posts
    282

    Default Re: i7 930 / UD7 Overclocking advice

    ok so ive just had a BSOD but it flashed so quick i couldnt see what error code it gave.

    The screen that comes up when your back in windows doesnt seem to show either of these as quoted before:

    "0x000000124 More Vtt (124 in windows error message after restart)
    0x000000101 More VCore (101 in windows error message after restart)"

    Instead it shows

    BCCode: 50
    BCP1: FFFFF8E002F655B4
    BCP2: 0000000000000001
    BCP3: FFFFF80002DA763E
    BCP4: 0000000000000005
    OS Version: 6_1_7600
    Service Pack: 0_0
    Product: 768_1

    Any ideas? Im guessing its vcore but would be good to see the error code somewhere

  2. #22
    Join Date
    Mar 2010
    Location
    UK
    Posts
    282

    Default Re: i7 930 / UD7 Overclocking advice

    Well after a night of powering down and back on i thought i finally sorted my probs, but come this morning i switched on the pc..... fan power up, fans power down, fans power up... followed by the red warning screen :(

    Prime is stable, better than before as now on the vcore im down to 1.26250 from 1.3v though just cant seem to get rid of this stupid "warning" screen....

    Any ideas?

  3. #23
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: i7 930 / UD7 Overclocking advice

    Sorry, I left that one out of the BSOD codes for you. This is the code "BCCode", that will be the end values of your BSOD's

    BSOD Error codes and what they mean:
    0X00000050 << Incorrect Memory Timing/Freq or Uncore Multi
    0X00000124 << Incorrect QPI/Vtt Voltage (To Much/Not Enough)
    0X00000101 << Not enough Vcore Voltage

    So looks like you have something wrong with your uncore or memory. Can you post your new full settings again.

    If the warning screen is in the MIT Section of the BIOS you are likely not using your overclock settings. Are you sure they are loading? If you think they are, you maybe should clear your CMOS and then load optimized and apply/reboot again and make all needed changes. Then let windows load with defaults, then come back to the BIOS to be sure no red box in MIT. Then load your settings again, and if the warning comes back they are still failing and would need changed.

  4. #24
    Join Date
    Mar 2010
    Location
    UK
    Posts
    282

    Default Re: i7 930 / UD7 Overclocking advice

    But it doesnt happen "all" the time, its like before. Sometimes youll boot the pc up and it will say "overclock failure" and other times it will just load. On the occasion where it fails, your simply entering BIOS, F10 to save and straight into windows at oc'd levels.

    Will post up my new configuration shortly

  5. #25
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: i7 930 / UD7 Overclocking advice

    do you use your pc for short periods or leave on all the time? maybe the cmos battery is low in power causing it to lose settings? idk for sure
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

  6. #26
    Join Date
    Mar 2010
    Location
    UK
    Posts
    282

    Default Re: i7 930 / UD7 Overclocking advice

    Ok here's the BIOS settings, oh and BTW, that above error code was all i had, couldnt find any other reference to verify why i had the BSOD, anyway.... BIOS settings:

    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Disable]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Enabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Enabled]
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. x36
    Uncore Frequency .......................... 3600mhz
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................[200]
    PCI Express Frequency (MHz) ........... [100]

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Turbo]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [8.0]
    DRAM Timing Selectable (SPD) .......... [Expert]


    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Level 1]
    CPU Vcore ...............................[1.26250v]
    QPI/VTT Voltage 1.150v ............[1.335v]
    CPU PLL 1.800v .......................[auto]

    MCH/ICH
    PCIE 1.500v ...........................[1.540v]
    QPI PLL 1.100v .......................[1.240v]
    IOH Core 1.100v .....................[1.200v]
    ICH I/O 1.500v .......................[1.500v]
    ICH Core 1.1v ........................[1.140v]

    DRAM
    DRAM Voltage 1.500v ..............[1.660v]
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

  7. #27
    Join Date
    Mar 2010
    Location
    UK
    Posts
    282

    Default Re: i7 930 / UD7 Overclocking advice

    Quote Originally Posted by warren300 View Post
    do you use your pc for short periods or leave on all the time?
    I do use my pc for extended period of times, i.e anything from 1hr to 12hrs constant.

    maybe the cmos battery is low in power causing it to lose settings? idk for sure
    Is a new build if that makes any difference? Any way to check? Doesnt lose date and time settings etc

  8. #28
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: i7 930 / UD7 Overclocking advice

    What are your memory timings?????

    You can try this, or more QPI/Vtt and possibly IOH voltage, whichever you think is best.

    Uncore Frequency .......................... 3600mhz << Try x17 and x16

    Advanced DRAM Features:
    Performance Enhance ...................... [Turbo] << try Extreme

    That above, or more voltages, or test both. Those would address the 050 BSOD. You could also have timing issues, but you did not post them so I couldn't say

  9. #29
    Join Date
    Mar 2010
    Location
    UK
    Posts
    282

    Default Re: i7 930 / UD7 Overclocking advice

    Quote Originally Posted by Lsdmeasap View Post
    What are your memory timings?????
    9-9-9-24-1 on all 3 channels

    You can try this, or more QPI/Vtt and possibly IOH voltage, whichever you think is best.

    Uncore Frequency .......................... 3600mhz << Try x17 and x16

    Advanced DRAM Features:
    Performance Enhance ...................... [Turbo] << try Extreme

    That above, or more voltages, or test both. Those would address the 050 BSOD. You could also have timing issues, but you did not post them so I couldn't say
    Im not getting the BSOD anymore, i already said this was only when i was benching using prime, once the vcore was raised it was fine. The only issue i have now is when i turn the PC on i get the stupid overclock failure screen like before, otherwise system is stable, even more so than before hence running lower voltages and still being stable. Im starting to get fed up with this mobo :(

  10. #30
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: i7 930 / UD7 Overclocking advice

    Thanks for the timings!

    Well BSOD or not, thinga re not right and you are likely running stock in windows right? Either way if you are seeing the red warning in the MIT section your settings are still not right.

    Don't give up so easy! Give us your FULL settings now that are still causing the warning and we'll have a look. Did you try the uncore and or voltage changes I suggested above yet?

Page 3 of 26 FirstFirst 1234513 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •