Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: Newbie temp question




  1. #1
    Join Date
    Mar 2010
    Location
    WALES
    Posts
    12

    Default Newbie temp question

    Hi everyone read through all the posts about over clocking and have set my board up to the settings advised on here and have clocked my Q9550 TP 4 x 3900 but whilst putting my comp under a bit of strain im getting core temps of 52c is this safe ? it only says 50c on the info below but the actual program says core 0 and 3 max 52c using a artic cooling freezer 7 pro v1 would this be better ?

    http://www.overclock.co.uk/product/P...l-LG_9079.html

    thanks


    CPUID HWMonitor Report
    -------------------------------------------------------------------------
    Binaries
    -------------------------------------------------------------------------
    HWMonitor version 1.1.5.0
    Monitoring
    -------------------------------------------------------------------------
    Mainboard Model EP45-DS3 (0x000001F5 - 0x00B6660C)
    LPCIO
    -------------------------------------------------------------------------
    LPCIO Vendor ITE
    LPCIO Model IT8718
    LPCIO Vendor ID 0x90
    LPCIO Chip ID 0x8718
    LPCIO Revision ID 0x5
    Config Mode I/O address 0x2E
    Config Mode LDN 0x4
    Config Mode registers
    00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
    00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 00
    10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    20 87 18 05 00 00 01 FF 3F 01 88 01 00 01 00 00 00
    30 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    60 02 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    70 00 02 00 00 04 04 00 00 00 00 00 00 00 00 00 00
    Register space LPC, base address = 0x0290

    Hardware Monitors
    -------------------------------------------------------------------------
    Hardware monitor ITE IT87
    Voltage 0 1.22 Volts [0x4C] (CPU VCORE)
    Voltage 1 1.98 Volts [0x7C] (DDR)
    Voltage 2 3.31 Volts [0xCF] (+3.3V)
    Voltage 3 4.95 Volts [0xB8] (+5V)
    Voltage 7 12.61 Volts [0xC5] (+12V)
    Voltage 8 3.09 Volts [0xC1] (VBAT)
    Temperature 0 41C (105F) [0x29] (System)
    Temperature 1 44C (111F) [0x2C] (CPU)
    Fan 0 2848 RPM [0xED] (FANIN0)
    Fan 1 931 RPM [0x2D5] (FANIN1)
    Fan 2 1722 RPM [0x188] (FANIN2)
    Fan 3 2385 RPM [0x11B] (FANIN3)
    Register space LPC, base address = 0x0290
    00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
    00 13 00 00 00 FF FF 00 37 FF 87 54 09 17 ED D5 88
    10 FF FF FF 72 D7 FD FC FD 00 02 01 FF FF FF FF FF
    20 4C 7C CF B8 3F 12 06 C5 C1 29 2C FE 80 61 92 92
    30 FF 00 FF 00 FF 00 FF 00 FF 00 FF 00 FF 00 FF 00
    40 7F 7F 7F 7F 7F 7F 5F 74 2D 40 9C 22 FF FF FF FF
    50 FF 2A 7F 7F 7F 50 FA FA 90 FA 06 12 60 00 00 00
    60 00 14 41 23 90 03 FF FF 00 14 41 23 90 03 FF FF
    70 00 14 41 23 90 03 FF FF FF FF FF FF FF FF FF FF
    80 1B 01 00 00 FF FF 00 00 00 00 00 00 00 00 02 C1
    90 FF 00 00 00 FF 00 00 00 FF FF FF FF FF FF FF FF
    A0 00 00 00 00 00 00 00 FF FF FF FF FF FF FF FF FF
    B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    Hardware monitor Intel Core 2 Quad Q9550
    Temperature 0 50C (122F) [0x32] (Core #0)
    Temperature 1 46C (114F) [0x36] (Core #1)
    Temperature 2 44C (111F) [0x38] (Core #2)
    Temperature 3 49C (120F) [0x33] (Core #3)
    Hardware monitor ATI Radeon HD 3850
    Temperature 0 38C (100F) (GPU Core)
    Hardware monitor SAMSUNG HD103UJ
    Temperature 0 25C (77F) [0x19] (Assembly)
    Temperature 2 21C (69F) [0x15] (Air Flow)
    Hardware monitor WDC WD3000HLFS-01G6U1
    Temperature 0 27C (80F) [0x1B] (Assembly)

    Processors
    -------------------------------------------------------------------------
    Number of processors 1
    Number of threads 4
    APICs
    -------------------------------------------------------------------------
    Processor 0
    -- Core 0
    -- Thread 0 0
    -- Core 1
    -- Thread 0 1
    -- Core 2
    -- Thread 0 2
    -- Core 3
    -- Thread 0 3
    Processors Information
    -------------------------------------------------------------------------
    Processor 1 ID = 0
    Number of cores 4 (max 4)
    Number of threads 4 (max 4)
    Name Intel Core 2 Quad Q9550
    Codename Yorkfield
    Specification Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz
    Package (platform ID) Socket 775 LGA (0x4)
    CPUID 6.7.A
    Extended CPUID 6.17
    Core Stepping E0
    Technology 45 nm
    Core Speed 3901.4 MHz
    Multiplier x FSB 8.5 x 459.0 MHz
    Rated Bus speed 1835.9 MHz
    Stock frequency 2833 MHz
    Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, EM64T
    L1 Data cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
    L1 Instruction cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
    L2 cache 2 x 6144 KBytes, 24-way set associative, 64-byte line size
    FID/VID Control yes
    FID range 6.0x - 8.5x
    Max VID 1.275 V
    Last edited by REDBULL; 03-31-2010 at 05:43 PM.

  2. #2
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Newbie temp question

    Your Freezer Pro 7 is a decent middle tier cpu cooler, the Prolimatech Megahalems is a top tier cooler.
    Ambient room temperature and the case fan setup has a major effect on system temperatures.
    If your room temperature is higher or lower, your cpu core temperatures will rise or fall by a similar amount.
    52 degrees (C) is decent if you're running Prime95 or OCCT stress tests, and up to 65 (C) is very good when running Intel BurnTest (IBT) or LinX.

    If you upgrade your cpu cooler, make sure that the new cooler's height will not be too tall for your computer case.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  3. #3
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Newbie temp question

    I agree, I think 52C is fine for a gaming temp or load, it's actually fairly good I think for a quad at your speeds.

    What load or strain was you putting it under when you see the 52C?

  4. #4
    Join Date
    Mar 2010
    Location
    WALES
    Posts
    12

    Default Re: Newbie temp question

    Well when i try to run occt 3.10 i get a blue screen and it says this

    Problem signature:
    Problem Event Name: BlueScreen
    OS Version: 6.1.7600.2.0.0.256.4
    Locale ID: 2057
    Additional information about the problem:
    BCCode: 124
    BCP1: 0000000000000000
    BCP2: FFFFFA8004A9D028
    BCP3: 00000000B2000040
    BCP4: 0000000000000800
    OS Version: 6_1_7600
    Service Pack: 0_0
    Product: 256_1

    and prime95 doesnt work either it says windows encounter a error and closes so opened convertxtodvd 3 times and converted a avi file all running at the same time , when my pc is just running normal i get these temps

    Hardware monitor ITE IT87
    Voltage 0 1.25 Volts [0x4E] (CPU VCORE)
    Voltage 1 1.98 Volts [0x7C] (DDR)
    Voltage 2 3.31 Volts [0xCF] (+3.3V)
    Voltage 3 4.95 Volts [0xB8] (+5V)
    Voltage 7 12.61 Volts [0xC5] (+12V)
    Voltage 8 3.09 Volts [0xC1] (VBAT)
    Temperature 0 40C (104F) [0x28] (System)
    Temperature 1 36C (96F) [0x24] (CPU)
    Fan 0 2848 RPM [0xED] (FANIN0)
    Fan 1 943 RPM [0x2CC] (FANIN1)
    Fan 2 1722 RPM [0x188] (FANIN2)
    Fan 3 2377 RPM [0x11C] (FANIN3)
    Register space LPC, base address = 0x0290
    00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
    00 13 00 00 00 FF FF 00 37 FF 87 54 09 17 EC CC 88
    10 FF FF FF 72 D7 FD FC FD 00 02 01 FF FF FF FF FF
    20 4E 7C CF B8 13 05 06 C5 C1 28 24 FE 80 34 DA DA
    30 FF 00 FF 00 FF 00 FF 00 FF 00 FF 00 FF 00 FF 00
    40 7F 7F 7F 7F 7F 7F 5F 74 2D 40 9C 22 FF FF FF FF
    50 FF 2A 7F 7F 7F 50 FA FA 90 FA 06 12 60 00 00 00
    60 00 14 41 23 90 03 FF FF 00 14 41 23 90 03 FF FF
    70 00 14 41 23 90 03 FF FF FF FF FF FF FF FF FF FF
    80 1C 01 00 00 FF FF 00 00 00 00 00 00 00 00 02 C0
    90 FF 00 00 00 FF 00 00 00 FF FF FF FF FF FF FF FF
    A0 00 00 00 00 00 00 00 FF FF FF FF FF FF FF FF FF
    B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    Hardware monitor Intel Core 2 Quad Q9550
    Temperature 0 39C (102F) [0x3D] (Core #0)
    Temperature 1 39C (102F) [0x3D] (Core #1)
    Temperature 2 38C (100F) [0x3E] (Core #2)
    Temperature 3 41C (105F) [0x3B] (Core #3)

    im using a coolmaster aluminium case and have 2 fans at the front and 1 on the back plus the cpu fan .

    thanks

  5. #5
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Newbie temp question

    Please post your full BIOS settings using the template in this post.
    Also follow steps 1, 2, and 3, in this post for additional information that will help us to advise you.

  6. #6
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Newbie temp question

    BCCode: 124 << This is BSOD 0x00000124

    That means you need to add more Vtt voltage (CPU Termination)

  7. #7
    Join Date
    Mar 2010
    Location
    WALES
    Posts
    12

    Default Re: Newbie temp question

    ok thanks for that , when i get time to night ill fill out the bios form with my bios settings and post them up for you .

    thanks

  8. #8
    Join Date
    Mar 2010
    Location
    WALES
    Posts
    12

    Default Re: Newbie temp question

    heres my bios settings ive filled it out best i could

    Motherboard: Model: GA-EP45-DS3 REV A2 BIOS F9
    Cpu: Model INTEL Q9550
    Ram: Brand, CORSAIR 2 x CM2X2048-6400C5C 800 MHZ 5-5-5-18 1.8V
    Power Supply Unit: OCZ 700W GAMEXSTREAM
    note: replace all ?? with the value displayed in your bios.
    ----> Replace "Auto" with manually set values.
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------------- : [Auto]
    CPU Clock Ratio ---------------------- : [8]
    Fine CPU Clock Ratio ----------------- : [0.5]
    CPU Frequency ---------------------: 3.90GHZ
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control --------------- : [Enabled]
    CPU Host Frequency (Mhz) --------------: [459]
    PCI Express Frequency (Mhz) ---------- : [100]
    C.I.A.2 ------------------------------ : [Disabled]
    Advanced Clock Control ------- [Press Enter]
    CPU Clock Drive ---------------------- : [800MV]
    PCI Express Clock Drive -------------- : [900MV]
    CPU Clock Skew (ps) ------------------ : [0ps]
    MCH Clock Skew (ps) ------------------ : [0ps]
    DRAM Performance Control
    Performance Enhance ------------------- : [standard]
    Extreme Memory Profile --- (X.M.P.) --- : [Disabled]
    (G)MCH Frequency Latch ---------------- : [Auto]
    System Memory Multiplier -------------- : [2.00B]
    Memory Frequency (Mhz) ---------------- : [800] [918]
    DRAM Timing Selectable ---------------- : [MANUAL] <-- set to MANUAL for overclocking
    Standard Timing Control
    CAS Latency Time -------- 5 ---------- : [Auto]
    tRCD ------------------- 5 ---------- : [Auto]
    tRP --------------------- 5 ---------- : [Auto]
    tRAS ------------------- 18 ---------- : [Auto]
    Advanced Timing Control
    tRRD ------------------- 3 ---------- : [Auto]
    tWTR ------------------- 3 ---------- : [Auto]
    tWR ---------------------6 ---------- : [Auto]
    tRFC ------------------- 52 ---------- : [Auto]
    tRTP ------------------- 3 ---------- : [Auto]
    Command Rate (CMD) ------ 0 ------------ : [Auto] <--- Auto or 0 is OK
    Driving Strength Profiles
    Driving Strength --------- : ALL SET TO AUTO HAVNT A CLUE HERE SORRY
    Channel A
    Static tRead Value --------------------- : [Auto]
    tRD Phase0 Adjustment ------------------ : [Auto] <-- leave this and below set to AUTO
    tRD Phase1 Adjustment ------------------ : [Auto]
    tRD Phase2 Adjustment ------------------ : [Auto]
    tRD Phase3 Adjustment ------------------ : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ----------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ----------------- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto] ps
    Dimm2 Clock Skew Control --------------- : [Auto] ps
    Channel B
    Static tRead Value --------------------- : [Auto]
    tRD Phase0 Adjustment ------------------ : [Auto] <-- leave this and below set to AUTO
    tRD Phase1 Adjustment ------------------ : [Auto]
    tRD Phase2 Adjustment ------------------ : [Auto]
    tRD Phase3 Adjustment ------------------ : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ----------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ----------------- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto] ps
    Dimm2 Clock Skew Control --------------- : [Auto] ps
    Motherboard Voltage Control
    CPU
    Voltage Types------------ Normal -------- Current -----
    Load-Line Calibration ----------------- : [Disabled]
    CPU Vcore --------------- 1.27500V ---- : [1.28750V]
    CPU Termination --------- 1.200V* ----- : [1.200V]
    CPU PLL ----------------- 1.500V* ----- : [1.500V]
    CPU Reference ----------- 0.760V* ----- : [Auto]
    CPU Reference2 ---------- ?.???V* ----- : [Auto] Havnt got this on mine
    MCH/ICH
    MCH Core ---------------- 1.100V ------- : [1.200]
    MCH Reference ----------- 0.760V ------- : [Auto]
    MCH/DRAM Ref ------------ 0.900V ------ : [Auto]
    ICH I/O ----------------- 1.500V ------- : [1.500v]
    ICH Core ---------------- ?.???V ------- : [Auto] havnt got this on mine
    DRAM
    DRAM Voltage ------------ 1.800V ------- : [Auto]
    DRAM Termination -------- 0.900V ------- : [Auto]
    Channel A Reference ----- 0.900V ------- : [Auto]
    Channel B Reference ----- 0.900V ------- : [Auto]
    Advanced Settings
    Limit CPUID Max. to 3 ------------------ : [Disabled]
    No-Execute Memory Protect -------------- : [Enabled]
    CPU Enhanced Halt (C1E) ---------------- : [Disabled]
    C2/C2E State Support ------------------- : [Disabled]
    x C4/C4E State Support ----------------- : [Disabled]
    CPU Thermal Monitor 2 (TM2) ------------ : [Enabled]
    CPU EIST Function --------------------- : [Disabled]
    Virtualization Technology -------------- : [Disabled]
    Integrated Peripherals
    Legacy USB Storage Detect ------------- : [Disabled]


    thanks
    Last edited by REDBULL; 04-01-2010 at 06:46 PM.

  9. #9
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Newbie temp question

    How much memory exactly do you have?
    Re-check CPU PLL value.
    Likely you need more vcore and VTT, and possibly DRAM voltage.
    Please post the screen capture as desribed in step 4, it will give a more complete picture anout your settings.

  10. #10
    Join Date
    Mar 2010
    Location
    WALES
    Posts
    12

    Default Re: Newbie temp question

    oops your right the CPU PLL value is 1.500v
    i have 4 gig of memory

    not sure how to do screen shots but got links

    CPU-Z Validator 3.1


    thanks

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •