Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 3 123 LastLast
Results 1 to 10 of 30

Thread: Ga-890gpa-ud3h o/c




  1. #1
    Join Date
    Dec 2008
    Posts
    88

    Default Ga-890gpa-ud3h o/c

    new to AMD but just got this board with a phenom ll x2 555. how do i unlock? also any o/c templates?

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Ga-890gpa-ud3h o/c

    You will need to wait on or PM artdrivers for help with AMD, he is our resident AMD Guru (Reminds me, he needs a member title change)

  3. #3
    Join Date
    Dec 2008
    Posts
    88

    Default Re: Ga-890gpa-ud3h o/c

    thanks hope he sees this also I cannot get thr raid to work and drivers are installed.

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  5. #5
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Ga-890gpa-ud3h o/c

    Hi race301 What do you want to work on first RAID? http://forums.tweaktown.com/f69/ga-8...se-help-38942/ or OC? Unlocking cores? Find Advanced Clock Calibration (ACC) function in your bios. http://www.xbitlabs.com/articles/cpu...-ii-x2_15.html
    Have you flashed your bios yet? http://www.gigabyte.com.tw/Support/M...ctID=3342&ver=
    Below is a PDF of your motherboard manual. It may take a bit to download. http://download.gigabyte.ru/manual/m...gpa-ud3h_e.pdf
    Last edited by artdrivers; 04-03-2010 at 09:42 AM.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  6. #6
    Join Date
    Dec 2008
    Posts
    88

    Default Re: Ga-890gpa-ud3h o/c

    I already have W7 64b loaded on a 650 WD drive, so o/c for now. :) First AMD I have owned. Thanks in advance.
    I have this ram http://www.newegg.com/Product/Produc...82E16820227483
    Last edited by race301; 04-03-2010 at 09:39 AM. Reason: link

  7. #7
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: Ga-890gpa-ud3h o/c

    Could we start with a picture of your PC health? Below is a template of it for you to copy your bios temps, voltages, and fan settings to it. I believe this is a good place to start. When you first go into bios set it to load optimized defaults. Save and exit. Reboot back into bios for readings.
    Code:
    PC Health Status
    Hardware Thermal Control [Enabled]
    Reset Case Open Status [Disabled]
    Case Opened No
    Vcore 1.364V
    DDR3 1.5V 1.536V
    +3.3V 3.280V
    +12V 12.048V
    Current System Temperature 38oC
    Current CPU Temperature 36oC
    Current CPU FAN Speed 1962 RPM
    Current SYSTEM FAN1 Speed 0 RPM
    Current SYSTEM FAN2 Speed 0 RPM
    Current POWER FAN Speed 0 RPM
    CPU Warning Temperature [Disabled]
    CPU FAN Fail Warning [Disabled]
    SYSTEM FAN1 Fail Warning [Disabled]
    SYSTEM FAN2 Fail Warning [Disabled]
    POWER FAN Fail Warning [Disabled]
    CPU Smart FAN Control [Enabled]
    CPU Smart FAN Mode [Auto]
    System Smart FAN Control [Enabled]
    Then we will have a look at your motherboard intelligent tweaks. Again change templates. Please make no changes to your bios. Change items in red. Nothing else for that may confuse me.
    Code:
    MB Intelligent Tweaker(M.I.T.)
    } IGX Configuration [Press Enter]
    CPU Clock Ratio [Auto] 2800Mhz
    CPU NorthBridge Freq. [Auto] 2000Mhz
    CPU Host Clock Control [Auto]
    x CPU Frequency(MHz) 200
    PCIE Clock(MHz) [Auto]
    HT Link Width [Auto]
    HT Link Frequency [Auto] 2000Mhz
    Set Memory Clock [Auto]
    x Memory Clock x6.66 1333Mhz
    } DRAM Configuration [Press Enter]
    ******** System Voltage Optimized ********
    System Voltage Control [Auto]
    x CPU PLL Voltage Control Auto
    x DRAM Voltage Control Auto
    x DDR VTT Voltage Control manual
    x NB Voltage Control manual
    x SidePort Mem Volt Control manual
    x NB/PCIe/PLL Voltage Control manual
    x CPU NB VID Control manual
    x CPU Voltage Control Auto
    Normal CPU Vcore 1.3250V
    One more while we are here. For this one you will need to change timing items from auto to manual, save and exit reboot into bios and read the timing items put them on a change the auto's on the template and post all of these results.
    Code:
          DRAM Configuration
    DCTs Mode [Unganged]
    DDR3 Timing Items [manual] SPD Auto
    x CAS# latency Auto 9T 9T
    x RAS to CAS R/W Delay Auto 9T 9T
    x Row Precharge Time Auto 9T 9T
    x Minimum RAS Active Time Auto 24T 24T
    x 1T/2T Command Timing Auto -- --
    x TwTr Command Delay Auto 5T 5T
    x Trfc0 for DIMM1 Auto 110ns 110ns
    x Trfc2 for DIMM2 Auto -- --
    x Trfc1 for DIMM3 Auto -- --
    x Trfc3 for DIMM4 Auto -- --
    x Write Recovery Time Auto 10T 10T
    x Precharge Time Auto 5T 5T
    x Row Cycle Time Auto 33T 33T
    x RAS to RAS Delay Auto 4T 4T
    **DCTs Drive Strength** DCT0 DCT1
    ProcOdt(ohms) [Auto] 60 [Auto] 60
    DQS drive Strength [Auto] 1.0x [Auto] 1.0x
    Data drive Strength [Auto] 1.0x [Auto] 1.0x
    MEMCLK drive Strength [Auto] 1.25x [Auto] 1.25x
    Addr/Cmd drive Strength [Auto] 1.5x [Auto] 1.5x
    CS/ODT drive Strength [Auto] 1.5x [Auto] 1.5x
    CKE drive Strength [Auto] 1.5x [Auto] 1.5x
    Bank Interleaving [Enabled]
    Channel interleave [Enabled]
    Just change the ones on the templates that are different. And post them back here.
    We will get back to you later with changes. After we have a chance to see your bios readings. OK?
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  8. #8
    Join Date
    Dec 2008
    Posts
    88

    Default Re: Ga-890gpa-ud3h o/c

    Will post a little later. Thanks

  9. #9
    Join Date
    Dec 2008
    Posts
    88

    Default Re: Ga-890gpa-ud3h o/c

    Put mine next to yours



    Quote Originally Posted by artdrivers View Post
    Could we start with a picture of your PC health? Below is a template of it for you to copy your bios temps, voltages, and fan settings to it. I believe this is a good place to start. When you first go into bios set it to load optimized defaults. Save and exit. Reboot back into bios for readings.
    Code:
    PC Health Status
    Hardware Thermal Control [Enabled]
    Reset Case Open Status [Disabled]
    Case Opened No        yes
    Vcore 1.364V          1.472
    DDR3 1.5V 1.536V  1.488
    +3.3V 3.280V           3.344
    +12V 12.048V           12.175
    Current System Temperature 38oC     36
    Current CPU Temperature 36oC          28
    Current CPU FAN Speed 1962 RPM     1011
    Current SYSTEM FAN1 Speed 0 RPM
    Current SYSTEM FAN2 Speed 0 RPM
    Current POWER FAN Speed 0 RPM
    CPU Warning Temperature [Disabled]
    CPU FAN Fail Warning [Disabled]
    SYSTEM FAN1 Fail Warning [Disabled]
    SYSTEM FAN2 Fail Warning [Disabled]
    POWER FAN Fail Warning [Disabled]
    CPU Smart FAN Control [Enabled]
    CPU Smart FAN Mode [Auto]
    System Smart FAN Control [Enabled]
    Then we will have a look at your motherboard intelligent tweaks. Again change templates. Please make no changes to your bios. Change items in red. Nothing else for that may confuse me.
    Code:
    MB Intelligent Tweaker(M.I.T.)
    } IGX Configuration [Press Enter]
    CPU Clock Ratio [Auto] 2800Mhz     3200
    CPU NorthBridge Freq. [Auto] 2000Mhz
    CPU Host Clock Control [Auto]
    x CPU Frequency(MHz) 200
    PCIE Clock(MHz) [Auto]
    HT Link Width [Auto]
    HT Link Frequency [Auto] 2000Mhz
    Set Memory Clock [Auto]          
    x Memory Clock x6.66 1333Mhz           x5.33   1066
    } DRAM Configuration [Press Enter]
    ******** System Voltage Optimized ********
    System Voltage Control [Auto]
    x CPU PLL Voltage Control Auto
    x DRAM Voltage Control Auto
    x DDR VTT Voltage Control manual
    x NB Voltage Control manual
    x SidePort Mem Volt Control manual
    x NB/PCIe/PLL Voltage Control manual
    x CPU NB VID Control manual
    x CPU Voltage Control Auto
    Normal CPU Vcore 1.3250V
    1.400 all above auto
    One more while we are here. For this one you will need to change timing items from auto to manual, save and exit reboot into bios and read the timing items put them on a change the auto's on the template and post all of these results.
    Code:
          DRAM Configuration
    DCTs Mode [Unganged]
    DDR3 Timing Items [manual] SPD Auto
    x CAS# latency Auto 9T 9T         7t
    x RAS to CAS R/W Delay Auto 9T 9T       7t
    x Row Precharge Time Auto 9T 9T         7t
    x Minimum RAS Active Time Auto 24T 24T     30
    x 1T/2T Command Timing Auto -- --
    x TwTr Command Delay Auto 5T 5T            4t
    x Trfc0 for DIMM1 Auto 110ns 110ns
    x Trfc2 for DIMM2 Auto -- --      110ns
    x Trfc1 for DIMM3 Auto -- --
    x Trfc3 for DIMM4 Auto -- --
    x Write Recovery Time Auto 10T 10T   8t
    x Precharge Time Auto 5T 5T              4t
    x Row Cycle Time Auto 33T 33T          27t
    x RAS to RAS Delay Auto 4T 4T            4t
    **DCTs Drive Strength** DCT0 DCT1
    ProcOdt(ohms) [Auto] 60 [Auto] 60      60    240
    DQS drive Strength [Auto] 1.0x [Auto] 1.0x    1.25    1.5
    Data drive Strength [Auto] 1.0x [Auto] 1.0x    1.25    1.5
    MEMCLK drive Strength [Auto] 1.25x [Auto] 1.25x   1.5     1.5
    Addr/Cmd drive Strength [Auto] 1.5x [Auto] 1.5x     2.0     2.0
    CS/ODT drive Strength [Auto] 1.5x [Auto] 1.5x        1.5     2.0
    CKE drive Strength [Auto] 1.5x [Auto] 1.5x               2.0     2.0
    Bank Interleaving [Enabled]
    Channel interleave [Enabled]
    Just change the ones on the templates that are different. And post them back here.
    We will get back to you later with changes. After we have a chance to see your bios readings. OK?

  10. #10
    Join Date
    Dec 2008
    Posts
    88

    Default Re: Ga-890gpa-ud3h o/c


Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •