Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 22

Thread: Help overclocking i7-930 on a GA-EX58-UD5




  1. #11
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Help overclocking i7-930 on a GA-EX58-UD5

    Welcome to the real world!

    If you are still having issues post your current problematic settings and explain the problem and I can help.

  2. #12
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: Help overclocking i7-930 on a GA-EX58-UD5

    Hey LSD Im not having any real issues as of yet.. Main issue is tring to learing the x58 rules. Like max safe 24/7 volts, Vtt rules is it like the P45 keep vtt .05 under Vcore. Also vcore it self warren is suggesting 1.2-1.25v vcore up to 4ghz. My chips ViD is 1.26875 for 2.8ghz. Here are the settings im have set in my bios right now that I will be testings. Any suggestions or tips are greatly appreciated. My goal here is to push this thing to the max safe 24/7 o.c. and run ram at or close to its rated speed.

    Also whats this qpi and uncore speed? whats the max that they can be pushed? Another thing is what the Tjmax for these chips real temp says its 97c.

    Code:
    Advanced CPU Features:
    CPU Clock Ratio .........................[21]
    Intel(R) Turbo Boost Tech ...............[Disabled]
    CPU Cores Enabled .......................[All]
    CPU Multi Threading .....................[DISABLED]
    CPU Enhanced Halt (C1E) .................[DISABLED]
    C3/C6/C7 State Support ..................[ENABLED]
    CPU Thermal Monitor .....................[ENABLED]
    CPU EIST Function .......................[ENABLED]
    Bi-Directional PROCHOT ..................[ENABLED]
    Virtualization Technology ...............[DISABLED]
    
    
    Uncore & QPI Features:
    QPI Clock Ratio..........................[36x]
    QPI Link Speed ..........................[6.48GHz]
    Uncore Clock Ration......................[16x]
    Uncore Frequency ........................[2880MHz]
    Isonchronous Frequency ..................[ENABLED]
    
    
    Standard Clock Control:
    Base Clock (BCLK) Control ...............[ENABLED]
    BCLK Frequency (MHz) ....................[180]
    PCI Express Frequency (MHz) .............[100]
    
    
    Advanced Clock Control:
    CPU Clock Drive .........................[800mV]
    PCI Express Clock Drive .................[900mV]
    CPU Clock Skew ..........................[0ps]
    IOH Clock Skew ..........................[0ps]
    
    
    Advanced DRAM Features:
    Performance Enhance .....................[STANDARD]
    Extreme Memory Profile (X.M.P) ..........[DISABLED]
    System Memory Multiplier (SPD) ..........[8]
    Memory Frequency (Mhz)...................[1440]
    DRAM Timing Selectable (SPD) ............[AUTO]
    
    Channel A + B + C
    
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ........................[9]
    tRCD ....................................[9]
    tRP .....................................[9]
    tRAS ....................................[24]
    Command Rate (CMD).......................[T2]
    
    ##Channel A Advanced Timing Control##
    tRC .....................................[]  
    tRRD ....................................[]
    tWTR ....................................[] 
    tWR .....................................[]
    tWTP ....................................[]   
    tWL .....................................[]    
    tRFC ....................................[]
    tRTP ....................................[]
    tFAW ....................................[]
    Command Rate (CMD) ................
    
    ##Channel A Misc Timing Control##
    Round Trip Latency ......................[]
    
    
    Advanced Voltage Control:
    Load Line Calibration ...................[ENABLED]
    CPU Vcore 1.26875v.......................[1.30000v]
    QPI/VTT Voltage 1.175v ..................[1.315v]
    CPU PLL 1.800v ..........................[1.800v]
    PCIE 1.500v .............................[1.500V]
    QPI PLL 1.100v ..........................[1.100v]
    IOH Core 1.100v .........................[1.100v]
    ICH I/O 1.500v ..........................[1.500v]
    ICH Core 1.1v ...........................[1.100V]
    
    
    DRAM
    DRAM Voltage 1.500v .....................[1.600v]
    DRAM Termination 0.750v..................[AUTO]
    Ch-A Data VRef. 0.750v ..................[AUTO]
    Ch-B Data VRef. 0.750v ..................[AUTO]
    Ch-C Data VRef. 0.750v ..................[AUTO]
    Ch-A Address VRef. 0.750v ...............[AUTO]
    Ch-B Address VRef. 0.750v ...............[AUTO]
    Ch-C Address VRef. 0.750v ...............[AUTO]]
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  3. #13
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Help overclocking i7-930 on a GA-EX58-UD5

    QPI/Vtt must remain within .5 of the Vdimm, that is all. You can use above Vcore without issue.

    Vcore needed for 4Ghz or above all depends on the CPU only, not just stepping. You may need anywhere from 1.2-1.45 for 4Ghz or above


    QPI you can use any multi, just try to keep this under 8GT/s

    Uncore must always be at least 2 x memory multi, or above such as 2x +1 or 2x +2

    Realtemp should pickup the correct value from the MSR's, it is 100C so sounds about right to me.

    Settings look all ok for now, are you still pushing? May want to try x17-x18 uncore, sometimes this is better for stability than x16

  4. #14
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: Help overclocking i7-930 on a GA-EX58-UD5

    Thanks for the info. Yeah atm im still pushing it. Right now im at about 1hr 30 blend stable it still chugging.
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  5. #15
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Help overclocking i7-930 on a GA-EX58-UD5

    Well good luck tweaking things!

    Let us know if you need anymore help with anything

  6. #16
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: Help overclocking i7-930 on a GA-EX58-UD5

    Ok Im having trouble getting 200 BCLK any sortta stable. here are my settings for 190x21 with ht on turbo off. These will pass 10 passes of linx with 2gb ram selected and about 1-2hrs prim blend (dont remember exactly).

    Code:
    Advanced CPU Features:
    CPU Clock Ratio .........................[21]
    Intel(R) Turbo Boost Tech ...............[Disabled]
    CPU Cores Enabled .......................[All]
    CPU Multi Threading .....................[ENABLED]
    CPU Enhanced Halt (C1E) .................[ENABLED]
    C3/C6/C7 State Support ..................[ENABLED]
    CPU Thermal Monitor .....................[ENABLED]
    CPU EIST Function .......................[ENABLED]
    Bi-Directional PROCHOT ..................[ENABLED]
    Virtualization Technology ...............[ENABLED]
    
    
    Uncore & QPI Features:
    QPI Clock Ratio..........................[36x]
    QPI Link Speed ..........................[6.84GHz]
    Uncore Clock Ration......................[17x]
    Uncore Frequency ........................[3230MHz]
    Isonchronous Frequency ..................[ENABLED]
    
    
    Standard Clock Control:
    Base Clock (BCLK) Control ...............[ENABLED]
    BCLK Frequency (MHz) ....................[190]
    PCI Express Frequency (MHz) .............[100]
    
    
    Advanced Clock Control:
    CPU Clock Drive .........................[800mV]
    PCI Express Clock Drive .................[900mV]
    CPU Clock Skew ..........................[0ps]
    IOH Clock Skew ..........................[0ps]
    
    
    Advanced DRAM Features:
    Performance Enhance .....................[EXTREAM]
    Extreme Memory Profile (X.M.P) ..........[DISABLED]
    System Memory Multiplier (SPD) ..........[8]
    Memory Frequency (Mhz)...................[1520]
    DRAM Timing Selectable (SPD) ............[AUTO]
    
    Channel A + B + C
    
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ........................[9]
    tRCD ....................................[9]
    tRP .....................................[9]
    tRAS ....................................[24]
    Command Rate (CMD).......................[T1]
    
    ##Channel A Advanced Timing Control##
    tRC .....................................[]  
    tRRD ....................................[]
    tWTR ....................................[] 
    tWR .....................................[]
    tWTP ....................................[]   
    tWL .....................................[]    
    tRFC ....................................[]
    tRTP ....................................[]
    tFAW ....................................[]
    Command Rate (CMD) ................
    
    ##Channel A Misc Timing Control##
    Round Trip Latency ......................[]
    
    
    Advanced Voltage Control:
    Load Line Calibration ...................[ENABLED]
    CPU Vcore 1.26875v.......................[1.31250v]
    QPI/VTT Voltage 1.175v ..................[1.355v]
    CPU PLL 1.800v ..........................[1.800v]
    PCIE 1.500v .............................[1.500V]
    QPI PLL 1.100v ..........................[1.140v]
    IOH Core 1.100v .........................[1.100v]
    ICH I/O 1.500v ..........................[1.500v]
    ICH Core 1.1v ...........................[1.100V]
    
    
    DRAM
    DRAM Voltage 1.500v .....................[1.600v]
    DRAM Termination 0.750v..................[AUTO]
    Ch-A Data VRef. 0.750v ..................[AUTO]
    Ch-B Data VRef. 0.750v ..................[AUTO]
    Ch-C Data VRef. 0.750v ..................[AUTO]
    Ch-A Address VRef. 0.750v ...............[AUTO]
    Ch-B Address VRef. 0.750v ...............[AUTO]
    Ch-C Address VRef. 0.750v ...............[AUTO]]

    Here are the settings that I have tried for 200x21 with HT on. These will bosd with in 2-3 min of prime small FFT. It did pass put test in vantage. The bosd would varry from 0x00000124 or 0x00000101 which i would pump up vcore or vtt depending on which came up or I would get other bosd which I tried more vcore or vtt or upping pci to 101. What do you think is holding me up?


    Code:
    Advanced CPU Features:
    CPU Clock Ratio .........................[21]
    Intel(R) Turbo Boost Tech ...............[Disabled]
    CPU Cores Enabled .......................[All]
    CPU Multi Threading .....................[ENABLED]
    CPU Enhanced Halt (C1E) .................[ENABLED]
    C3/C6/C7 State Support ..................[ENABLED]
    CPU Thermal Monitor .....................[ENABLED]
    CPU EIST Function .......................[ENABLED]
    Bi-Directional PROCHOT ..................[ENABLED]
    Virtualization Technology ...............[ENABLED]
    
    
    Uncore & QPI Features:
    QPI Clock Ratio..........................[36x]
    QPI Link Speed ..........................[6.84GHz]
    Uncore Clock Ration......................[16x]
    Uncore Frequency ........................[3200MHz]
    Isonchronous Frequency ..................[ENABLED]
    
    
    Standard Clock Control:
    Base Clock (BCLK) Control ...............[ENABLED]
    BCLK Frequency (MHz) ....................[200]
    PCI Express Frequency (MHz) .............[101]
    
    
    Advanced Clock Control:
    CPU Clock Drive .........................[800mV]
    PCI Express Clock Drive .................[900mV]
    CPU Clock Skew ..........................[0ps]
    IOH Clock Skew ..........................[0ps]
    
    
    Advanced DRAM Features:
    Performance Enhance .....................[TURBO]
    Extreme Memory Profile (X.M.P) ..........[DISABLED]
    System Memory Multiplier (SPD) ..........[8]
    Memory Frequency (Mhz)...................[1600]
    DRAM Timing Selectable (SPD) ............[AUTO]
    
    Channel A + B + C
    
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ........................[9]
    tRCD ....................................[9]
    tRP .....................................[9]
    tRAS ....................................[24]
    Command Rate (CMD).......................[T2]
    
    ##Channel A Advanced Timing Control##
    tRC .....................................[]  
    tRRD ....................................[]
    tWTR ....................................[] 
    tWR .....................................[]
    tWTP ....................................[]   
    tWL .....................................[]    
    tRFC ....................................[]
    tRTP ....................................[]
    tFAW ....................................[]
    Command Rate (CMD) ................
    
    ##Channel A Misc Timing Control##
    Round Trip Latency ......................[]
    
    
    Advanced Voltage Control:
    Load Line Calibration ...................[ENABLED]
    CPU Vcore 1.26875v.......................[1.3875v]
    QPI/VTT Voltage 1.175v ..................[1.455v]
    CPU PLL 1.800v ..........................[1.840v]
    PCIE 1.500v .............................[1.500V]
    QPI PLL 1.100v ..........................[1.240v]
    IOH Core 1.100v .........................[1.240v]
    ICH I/O 1.500v ..........................[1.500v]
    ICH Core 1.1v ...........................[1.200V]
    
    
    DRAM
    DRAM Voltage 1.500v .....................[1.600v]
    DRAM Termination 0.750v..................[AUTO]
    Ch-A Data VRef. 0.750v ..................[AUTO]
    Ch-B Data VRef. 0.750v ..................[AUTO]
    Ch-C Data VRef. 0.750v ..................[AUTO]
    Ch-A Address VRef. 0.750v ...............[AUTO]
    Ch-B Address VRef. 0.750v ...............[AUTO]
    Ch-C Address VRef. 0.750v ...............[AUTO]]
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  7. #17
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: Help overclocking i7-930 on a GA-EX58-UD5

    DRAM Voltage 1.500v .....................[1.600v] try with 1.66??
    Performance Enhance .....................[TURBO] tried with standard??
    CPU Enhanced Halt (C1E) .................[ENABLED]try disabled
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

  8. #18
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: Help overclocking i7-930 on a GA-EX58-UD5

    Well I might know what was holding me back... I think it was vcore as I reloaded my 190x21 settings and disabled HT bumped up vcore to 1.375 and set 200x21 and I just passed 10 pass linx at 1gb ram.
    Last edited by Acebmxer; 04-05-2010 at 12:31 PM.
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  9. #19
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Help overclocking i7-930 on a GA-EX58-UD5

    Seems like you are finding the problem eh? Put HT back on then and use more vcore :)

  10. #20
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: Help overclocking i7-930 on a GA-EX58-UD5

    Hey LSD can you post your bios setting for 4.2? Do you have HT and turbo on?
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





Page 2 of 3 FirstFirst 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •