Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 5 of 5

Thread: ma785gmt-ud2h BSOD




  1. #1
    Join Date
    Apr 2010
    Location
    Pennsylvania
    Posts
    3

    Default ma785gmt-ud2h BSOD

    Hello,

    I recently built a pc using the 785gmt board and have experienced many random BSOD. I was hoping someone could provide some insight on the matter.

    components:
    amd athlon ii x3 440
    gigabyte ma785gmt-ud2h
    Adata gaming 1600 ddr3
    msi 4770 cyclone
    seagate barracuda
    ocz 500w psu

    I have installed reinstalled windows twice so far and I am still experiencing BSOD. I have ran memtest and uncovered zero errors. I originally had a samsung f3 hdd which I returned as I originally thought this was the cause of my errors. Also, board is rev. 1.1 with f6 bios.

    Any help that can be provided is appreciated. I have attached the most recent minidump if that helps.

    Thanks
    -Brad

  2. #2
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: ma785gmt-ud2h BSOD

    Adata gaming 1600 ddr3
    You may need to change the voltage to 1.7v manually in bios.
    Code:
    MB Intelligent Tweaker(M.I.T.)
    } Advanced Clock Calibration [Press Enter]
    CPU Clock Ratio [Auto] 2800Mhz
    CPU NorthBridge Freq. [Auto] 2000Mhz
    CPU Host Clock Control [Auto]
    x CPU Frequency(MHz) 200
    PCIE Clock(MHz) [Auto]
    HT Link Width [Auto]
    HT Link Frequency [Auto] 2000Mhz
    VGA Core Clock control [Disabled]
    x VGA Core Clock(MHz) 500
    Set Memory Clock [Auto]
    x Memory Clock x6.66 1333Mhz
    } DRAM Configuration [Press Enter]
    ******** System Voltage Optimized ********
    System Voltage Control [Manual]
    DDR3 Voltage Control [+0.2]
    NorthBridge Volt Control [Normal]
    SouthBridge Volt Control [Normal]
    SidePort Mem Volt Controlj [Normal]
    CPU NB VID Control [Normal]
    CPU Voltage Control [Normal]
    Normal CPU Vcore 1.3250V
    msi 4770 cyclone
    You may need to set Internal Graphics Mode to disabled.
    Code:
    Advanced BIOS Features
    Internal Graphics Mode j [UMA+SidePort] Disabled
    Internal Graphics Mode kl [UMA] Disabled
    UMA Frame Buffer Size [Auto]
    x Surround View Disabled
    Onboard VGA output connect [Auto]
    AMD C1E Support (Note) [Software SMI]
    Virtualization [Disabled]
    Patch AMD TLB Erratum (Note) [Enabled]
    AMD K8 Cool&Quiet control [Auto]
    } Hard Disk Boot Priority [Press Enter]
    First Boot Device [Floppy]
    Second Boot Device [Hard Disk]
    Third Boot Device [CDROM]
    Password Check [Setup]
    HDD S.M.A.R.T. Capability [Disabled]
    Away Mode [Disabled]
    Backup BIOS Image to HDD [Disabled]
    Init Display First [PCI Slot]
    After this save press y and exit. When you go to windows go to control panel/ad and remove programs/or uninstall programs/ati software uninstaller. Uninstall it. If asked if you want to uninstall chipset yes. Then reboot download and install the new updated ati software for your card. Follow instructions on below url----> http://www.msi.com/index.php?func=downloadindex
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  3. #3
    Join Date
    Apr 2010
    Location
    Pennsylvania
    Posts
    3

    Default Re: ma785gmt-ud2h BSOD

    Thanks for the reply. I will try the changes and check back. Thanks again

  4. #4
    Join Date
    Apr 2010
    Location
    Pennsylvania
    Posts
    3

    Default Re: ma785gmt-ud2h BSOD

    Made the adjustments mentioned and all was working fine on Monday (1.7 for the ram, disabled integrated graphics, etc...). Fired it up after work yesterday (Tuesday) and was greeted with a referenced memory pop-up upon logging into windows. It ran for a about 20 minutes and then came a memory management bsod.

  5. #5
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: ma785gmt-ud2h BSOD

    Suggestions:
    You could need to tweak that memory voltage a little try 1.65v or maybe even 1.75v
    You may want to check SYSTEM, CPU, and GPU temperatures after running it a while.
    You can try this to see if it helps, can't hurt. Go into bios to PC Health Status disable smart fan controls. This will allow the fans to run at full speed. Also it would be a good idea to set the warning for the cpu temperature.
    Code:
    PC Health Status
    Hardware Thermal Control [Enabled]
    Reset Case Open Status [Disabled]
    Case Opened No
    Vcore 1.364V
    DDR3 1.5V 1.536V
    +3.3V 3.280V
    +12V 12.048V
    Current System Temperature 38oC
    Current CPU Temperature 36oC
    Current CPU FAN Speed 1962 RPM
    Current SYSTEM FAN Speed 0 RPM
    Current NB FAN Speed 0 RPM
    CPU Warning Temperature [70oC/158oF]
    CPU FAN Fail Warning [Disabled]
    SYSTEM FAN Fail Warning [Disabled]
    NB FAN Fail Warning [Disabled]
    CPU Smart FAN Control [Disabled]
    CPU Smart FAN Mode [Auto]
    System Smart FAN Control [Disabled]
    You can find out more on it page 56 and page 57 of your motherboard manual.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •