Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 6 of 8 FirstFirst ... 45678 LastLast
Results 51 to 60 of 74

Thread: GA-H57M-USB3 Issues




  1. #51
    Join Date
    Apr 2010
    Location
    Spain
    Posts
    20

    Default Re: GA-H57M-USB3 Issues

    Quote Originally Posted by Lsdmeasap View Post
    K, please DO NOT USE @BIOS to update!

    Use Qflash or DOS
    http://forums.tweaktown.com/f69/bios...h-guide-27576/
    Ok, thanks for the advice.

  2. #52
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  3. #53
    Join Date
    Apr 2010
    Location
    Spain
    Posts
    20

    Default Re: GA-H57M-USB3 Issues

    Quote Originally Posted by Lsdmeasap View Post
    Anytime, good luck with the flash
    I'll go and flash on thursday or friday because I'm working on a project right now and I cannot be playing around. I'll post my results as soon as I get them.
    Last edited by iballz; 05-13-2010 at 01:14 AM.

  4. #54
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  5. #55
    Join Date
    Apr 2010
    Location
    Spain
    Posts
    20

    Default Re: GA-H57M-USB3 Issues

    Quote Originally Posted by iballz View Post
    I'll go and flash on thursday or friday because I'm working on a project right now and I cannot be playing around. I'll post my results as soon as I get them.
    BIOS successfully flashed to last version (F6). Tested for one day and everything is fine so far. I had to use the generic PSU because the problem with the AeroCool persisted. The AeroCool is working fine with the other configuration.
    I've noticed that Gigabyte has launched a Rev 2.0 of this board. Can someone tell the differences between Rev 1.0 and Rev 2.0?

  6. #56
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-H57M-USB3 Issues

    Nice to hear all went well with your flash!

    Not sure of the differences on board revisions, it may just be ON/Off charge official support added as I see they have been adding this to a few models now as well as re-designed power phases.

    Did you compare the revisions on Gigabyte's site to see if you could notice any differences?

  7. #57
    Join Date
    May 2010
    Location
    Waterloo
    Posts
    5

    Default Re: GA-H57M-USB3 Issues

    Quote Originally Posted by djfuze View Post
    hey guys i just purchased a GIGABYTE GA-H57M-USB3 LGA 1156 Intel H57 HDMI USB 3.0 Micro ATX Intel Motherboard
    im running windows 7 ultimate 64bit
    i tryed installing 8 gigs of CORSAIR XMS3 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model
    so now every time i try loading the operating system it goes to the welcome sign and randomly shuts down.
    so what i did is take out the 1 pair and it boots up fine, no hang ups or nothing.
    so i went and just for ****z and giggles (sorry if anyone got offended by that) inserted just another stick of memory making it 3 sticks total 6 gigs booted up fine and ran fine. looked at my computer properties and read 6 gigs. post read 6, and change and memory ok. Now 20 min. or so later it shut down on me again.

    <dl class="prodDesc"><dd>
    </dd><dd>
    </dd></dl>
    Almost same set and got the same issue.
    What I did is set the memory to DDR1333 and it works good...
    trying to find some better solutions as well

  8. #58
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  9. #59
    Join Date
    May 2010
    Location
    Waterloo
    Posts
    5

    Default Re: GA-H57M-USB3 Issues

    Quote Originally Posted by Lsdmeasap View Post
    Are you setting your own Ram voltage and QPI/Vtt voltages?
    Yea after I change the voltage of Ram to 1.660 and PCH to 1.1, it works now. Thanks a lot for the solution. I think it will also works for that guy too coz we are using same ram

  10. #60
    Join Date
    Apr 2010
    Location
    Spain
    Posts
    20

    Default Re: GA-H57M-USB3 Issues

    Installed Win 7 Ultimate 32 bit. F6 BIOS, loaded optimized defaults and only changed the memory timings (7-7-7-20 CR-1) and voltage (1.6 V). Leaved everything else auto. Memory multiplier manually set to 10 and bclk 133 MHz. Working fine since last thursday.
    I was looking for differences between revision 1 and 2. Found that they added 2 transistors to revision 2. I will upload a picture later with the differences marked.
    Last edited by iballz; 05-25-2010 at 12:00 AM.

Page 6 of 8 FirstFirst ... 45678 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •