Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 7 of 8 FirstFirst ... 5678 LastLast
Results 61 to 70 of 74

Thread: GA-H57M-USB3 Issues




  1. #61
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-H57M-USB3 Issues

    Nice to see you guys both got your boards going smoothly now!!

    If you start to get 0x00000124 BSOD Screens that means you need to set a little more QPI/Vtt

  2. #62
    Join Date
    Apr 2010
    Location
    Spain
    Posts
    20

    Default Re: GA-H57M-USB3 Issues

    Quote Originally Posted by Lsdmeasap View Post
    Nice to hear all went well with your flash!

    Not sure of the differences on board revisions, it may just be ON/Off charge official support added as I see they have been adding this to a few models now as well as re-designed power phases.

    Did you compare the revisions on Gigabyte's site to see if you could notice any differences?
    Here is the picture with the two revisions differences. Version 2 is to the right. If anyone knows about what are these two extra transistors for, please post here.

    Quote Originally Posted by Lsdmeasap View Post
    Nice to see you guys both got your boards going smoothly now!!

    If you start to get 0x00000124 BSOD Screens that means you need to set a little more QPI/Vtt
    Thanks for the advice. Ill take that into account if I run into BSODs.
    Last edited by iballz; 05-25-2010 at 12:34 AM.

  3. #63
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-H57M-USB3 Issues

    Those are probably just for added power delivery to the rear USB ports, for things such as ON/Off charge for Ipods, ect.

  4. #64
    Join Date
    May 2010
    Location
    Waterloo
    Posts
    5

    Default Re: GA-H57M-USB3 Issues

    Hi there,

    Although I changed the voltage and the windows works fine now, it is not stable.
    I turned it on for one night and it rebooted when I was sleeping.
    I ran the everest stability test and it can not carry for 20+ min.

    So I search on the internet and found that:
    Code:
    f you want to use this DDR3-1600 memory with Intel's i5 you will be unable to expand past 4 gigs. According to Intel's spec definition, X.M.P. DIMMS and DDR3-1600 are supported for one DIMM per channel, which means forget about adding an additional pair of RAM sticks. 
    
    A call to Intel's tech support verified this. They recommend that if you want to use more than two sticks of RAM with the i5 that you use DDR3-1333.
    So that's maybe the reason why we cannot use the corsair 1600 4x2G for the machine. I checked your website and found you guys didn't check the compatibility for memory more than 4G for i5s.

    Thus I took out a pair of the memory and the system works fine under stability test for 1+ hour now.

    Any suggestion? Except asking me change to 1333 or take out 1 pair of my memory? :)

    Thanks

  5. #65
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: GA-H57M-USB3 Issues

    maybe if you raised qpi voltage it would run all sticks better
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  6. #66
    Join Date
    May 2010
    Location
    Waterloo
    Posts
    5

    Default Re: GA-H57M-USB3 Issues

    Quote Originally Posted by wazza300 View Post
    maybe if you raised qpi voltage it would run all sticks better
    well the thing is I used the optimized default and only higher the voltage for RAM and QPI (1.64 and 1.31), and it cannot carry for 20 mins.

    However after changing to 2Gx2, I could turn on the XMP without changing anything (no voltage changed, kept default voltage for RAM and QPI)

    I'm now testing another pair and try to see if it is because this pair is "not that compatible" with the board. The other pair has been tested via stability test for 2+ hours without rebooting.

  7. #67
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-H57M-USB3 Issues

    Well you could downclock the memory you have, instead of buying slower memory. Just use a memory multi that is slower than 1600Mhz if you think that is the issue.

  8. #68
    Join Date
    May 2010
    Location
    Somewhere
    Posts
    2

    Default Re: GA-H57M-USB3 Issues

    After weeks of severe problems with my new computer this thread helped me gain stability.
    Thank you very much!

    This is my setup:
    <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
    GA-H57M-USB3 (rev 1.0)<o:p></o:p>
    Intel Core i5 661 3,33GHz<o:p></o:p>
    Corsair XMS3 DDR3 1600MHz 4GB CL9 Kit w/2x 2GB XMS3 modules, CL9-9-9-24, 1.65V
    Corsair CMPSU-450VXEU - 450W<o:p></o:p>
    <o:p></o:p>
    Running F6 BIOS<o:p></o:p>
    Running Windows 7 Ultimate 64 bit
    <o:p></o:p>
    <o:p></o:p>
    These are the settings that finally helped:
    Code:
    - Advanced Frquency Settings:
    CPU Clock Ratio.................[21 X]
    CPU Frequency................3.36Ghz( 160x21)
    QPI Clock Ratio.................[x40]
    QPI Link Speed.................. 6.4Ghz
    Base Clock(BLCK) Control........[Enabled]
    BLCK Frequency(Mhz)............ [ 160]
    Extreme Memory Profile(X.M.P.)..[Profile1]
    System Memory Multiplier (SDP)..[ 8.0]
    Memory Frequency(Mhz)....1600....1280
     
    - Advanced Memory Settings:
    Extreme Memory Profile(X.M.P.)..[Profile1]
    System Memory Multiplier (SDP)..[ 8.0]
    Memory Frequency(Mhz)....1600....1280
    Performance Enchance............[Turbo]
     
    - Advanced Voltage Settings:
    QPI/Vtt Voltage......1.100V.....[1.150V]
    PCH Core............ 1.050V.....[1.120V]
    DRAM Voltage........ 1.500V.....[1.600V]
    This seems to be working fine for me but Im open for further suggestions to improve performance, stability or reduce power usage and heat.

  9. #69
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  10. #70
    Join Date
    Apr 2010
    Location
    Spain
    Posts
    20

    Default Re: GA-H57M-USB3 Issues

    Quote Originally Posted by zgx4 View Post
    After weeks of severe problems with my new computer this thread helped me gain stability.
    Thank you very much!

    This is my setup:
    <?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
    GA-H57M-USB3 (rev 1.0)<o:p></o:p>
    Intel Core i5 661 3,33GHz<o:p></o:p>
    Corsair XMS3 DDR3 1600MHz 4GB CL9 Kit w/2x 2GB XMS3 modules, CL9-9-9-24, 1.65V
    Corsair CMPSU-450VXEU - 450W<o:p></o:p>
    <o:p></o:p>
    Running F6 BIOS<o:p></o:p>
    Running Windows 7 Ultimate 64 bit
    <o:p></o:p>
    <o:p></o:p>
    These are the settings that finally helped:
    Code:
    - Advanced Frquency Settings:
    CPU Clock Ratio.................[21 X]
    CPU Frequency................3.36Ghz( 160x21)
    QPI Clock Ratio.................[x40]
    QPI Link Speed.................. 6.4Ghz
    Base Clock(BLCK) Control........[Enabled]
    BLCK Frequency(Mhz)............ [ 160]
    Extreme Memory Profile(X.M.P.)..[Profile1]
    System Memory Multiplier (SDP)..[ 8.0]
    Memory Frequency(Mhz)....1600....1280
     
    - Advanced Memory Settings:
    Extreme Memory Profile(X.M.P.)..[Profile1]
    System Memory Multiplier (SDP)..[ 8.0]
    Memory Frequency(Mhz)....1600....1280
    Performance Enchance............[Turbo]
     
    - Advanced Voltage Settings:
    QPI/Vtt Voltage......1.100V.....[1.150V]
    PCH Core............ 1.050V.....[1.120V]
    DRAM Voltage........ 1.500V.....[1.600V]
    This seems to be working fine for me but I’m open for further suggestions to improve performance, stability or reduce power usage and heat.
    What kind of problems did you have?
    Last edited by iballz; 05-27-2010 at 02:45 AM.

Page 7 of 8 FirstFirst ... 5678 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •