Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: Uncore woes, P55M-UD2




  1. #1
    Join Date
    Apr 2010
    Location
    EE
    Posts
    2

    Default Uncore woes, P55M-UD2

    My problem is following, I have a GA-P55M-UD2 board with F8 BIOS and an i5 750 on it, the memory multiplier is 10x and the uncore is 16x.
    This really bothers me - I know (through testing and theory) that my memory is being bottlenecked by that low uncore clock but I have no means of changing it as it's disabled in BIOS. What could I do to remedy the situation? I have no desire to up my BCLK from the default.
    I tried searching for answer, but so far I've had absolutely no luck in finding it.

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Uncore woes, P55M-UD2

    I do believe all 1156 CPU's have a locked uncore 1.5ish value, so nothing you can do really other than what you are already thinking about.

    Or move to 1366, where you can set any uncore you want.

  3. #3
    Join Date
    Apr 2010
    Location
    EE
    Posts
    2

    Default Re: Uncore woes, P55M-UD2

    Locked tight, huh. Thanks for letting me know, I shall not bother myself with that any further.

    The alternative methods are there, it's just that for day to day operation and power efficiency, messing with BCLK doesn't do much good.

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Uncore woes, P55M-UD2

    Yes, sadly I do belive all the 1156 CPU's are like that, maybe they will release a extreme one with unlocked multi's all around sometime, not sure?

    Could be some out now too, I dunno as I don't pay attention to it really, very likely there is some Xeons with unlocked Uncore for this socket already out.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •