Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 12 12311 ... LastLast
Results 1 to 10 of 115

Thread: GA-X58A-UD7 - n00b OC settings




  1. #1
    Join Date
    Nov 2009
    Location
    Somewhere
    Posts
    300

    Question GA-X58A-UD7 - n00b OC settings

    Hi All,

    Well having finally gotten my system working after two months of sending motherboards back and forth to gigabyte.. I'm now ready to start OC'ing:

    Memory is spec'd to run at 1866 @ 1.65V

    System build pix:



    How I keep my NB nice and cool (40C stable):



    Thanks,
    K


    BIOS:
    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Enabled]
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. [Auto]
    Uncore Frequency .......................... [Auto]
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Disabled]
    BCLK Frequency (MHz) .....................
    PCI Express Frequency (MHz) ........... [100]


    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [AUTO]
    DRAM Timing Selectable (SPD) .......... [AUTO]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ...................... 8
    tRCD ....................................... 8
    tRP ......................................... 8
    tRAS ....................................... 20

    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Standard]
    CPU Vcore ............................... 1.175
    QPI/VTT Voltage 1.150v ............ 1.200
    CPU PLL 1.800v ....................... 1.800

    MCH/ICH
    PCIE 1.500v ........................... 1.500
    QPI PLL 1.100v ....................... 1.100
    IOH Core 1.100v ..................... 1.100
    ICH I/O 1.500v ....................... 1.500
    ICH Core 1.1v ........................ 1.100

    DRAM
    DRAM Voltage 1.500v .............. 1.500
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]
    GA-X58A-UD7 rev1.0 - F9d // Intel i7 920 D0 @ 4.2Ghz - //vcore:Normal(1.2430v)+DVID+0.07500v//qpi_vtt:1.380v//bclk:200*21(turbo)
    6GB Corsair Dominator 1866 @ 1600 (9-9-9-24-2T@1.65v)


    CPU-Z Results: http://valid.canardpc.com/show_oc.php?id=2212669



  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-X58A-UD7 - n00b OC settings

    Looks good in there!

    Well, you never said what you want to try? So for now, try this for 3.9Ghz

    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Enabled] << Disable if you do not use
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. [Auto] << X36
    Uncore Frequency .......................... [Auto] << x20-22
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Disabled]
    BCLK Frequency (MHz) ..................... 186
    PCI Express Frequency (MHz) ........... [100]


    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Standard] << Extreme :)
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [AUTO] << x10
    DRAM Timing Selectable (SPD) .......... [AUTO] << Expert, then set each channel main timings one by one

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................9
    tRCD ....................................... 9
    tRP ......................................... 9
    tRAS ....................................... 20/24
    Command Rate (CMD) ................ 1T

    ^^ no link to memory, so if timings are different then set to spec ^^

    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Standard]
    CPU Vcore ............................... 1.175 << may need 1.25-1.4+ Depends on your CPU
    QPI/VTT Voltage 1.150v ............ 1.200 << may need 1.3-1.45+ I'd start around 1.35-1.4
    CPU PLL 1.800v ....................... 1.800 << Should be ok

    MCH/ICH
    PCIE 1.500v ........................... 1.500
    QPI PLL 1.100v ....................... 1.100 << 1.18-1.24
    IOH Core 1.100v ..................... 1.100 << May be ok, but I'd start with 1.14 then 1.2-1.24 if need be to pass stability tests
    ICH I/O 1.500v ....................... 1.500
    ICH Core 1.1v ........................ 1.100

    DRAM
    DRAM Voltage 1.500v .............. 1.500 << 1.66
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]
    Last edited by Lsdmeasap; 04-14-2010 at 05:47 PM.

  3. #3
    Join Date
    Nov 2009
    Location
    Somewhere
    Posts
    300

    Default Re: GA-X58A-UD7 - n00b OC settings

    I'll paste in the memory details...

    TR3X6G1866C9
    Speed Rating: PC3-15000
    Tested Speed: 1866Mhz
    Size: 6GB Kit (3 x 2GB)
    Tested Latency: 9-9-9-24
    Tested Voltage: 1.65
    Performance Profile: XMP
    SPD Speed: 1333Mhz
    SPD Latency: 9-9-9-24
    Package: 240pin DIMM
    GA-X58A-UD7 rev1.0 - F9d // Intel i7 920 D0 @ 4.2Ghz - //vcore:Normal(1.2430v)+DVID+0.07500v//qpi_vtt:1.380v//bclk:200*21(turbo)
    6GB Corsair Dominator 1866 @ 1600 (9-9-9-24-2T@1.65v)


    CPU-Z Results: http://valid.canardpc.com/show_oc.php?id=2212669



  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  5. #5
    Join Date
    Nov 2009
    Location
    Somewhere
    Posts
    300

    Default Re: GA-X58A-UD7 - n00b OC settings

    BSOD (0x00000124)

    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Enabled]
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. [x36] = 6.69GHz
    Uncore Frequency .......................... [20] = 3720
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) ..................... 186
    PCI Express Frequency (MHz) ........... [100]


    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Extreme]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [x10] = 1860
    DRAM Timing Selectable (SPD) .......... [Expert]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ...................... 8
    tRCD ....................................... 8
    tRP ......................................... 8
    tRAS ....................................... 20

    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Standard]
    CPU Vcore ............................... 1.125 & 1.3
    QPI/VTT Voltage 1.150v ............ 1.3 & 1.34
    CPU PLL 1.800v ....................... 1.800

    MCH/ICH
    PCIE 1.500v ........................... 1.500
    QPI PLL 1.100v ....................... 1.18 & 1.20
    IOH Core 1.100v ..................... 1.14 & 1.18
    ICH I/O 1.500v ....................... 1.500
    ICH Core 1.1v ........................ 1.100

    DRAM
    DRAM Voltage 1.500v .............. 1.66
    GA-X58A-UD7 rev1.0 - F9d // Intel i7 920 D0 @ 4.2Ghz - //vcore:Normal(1.2430v)+DVID+0.07500v//qpi_vtt:1.380v//bclk:200*21(turbo)
    6GB Corsair Dominator 1866 @ 1600 (9-9-9-24-2T@1.65v)


    CPU-Z Results: http://valid.canardpc.com/show_oc.php?id=2212669



  6. #6
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: GA-X58A-UD7 - n00b OC settings

    ^^^ 124 blue screen is not enough qpi,what qpi v did you try? try few clicks more
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

  7. #7
    Join Date
    Nov 2009
    Location
    Somewhere
    Posts
    300

    Default Re: GA-X58A-UD7 - n00b OC settings

    QPI/VTT Voltage 1.150v ............ 1.3 & 1.34
    GA-X58A-UD7 rev1.0 - F9d // Intel i7 920 D0 @ 4.2Ghz - //vcore:Normal(1.2430v)+DVID+0.07500v//qpi_vtt:1.380v//bclk:200*21(turbo)
    6GB Corsair Dominator 1866 @ 1600 (9-9-9-24-2T@1.65v)


    CPU-Z Results: http://valid.canardpc.com/show_oc.php?id=2212669



  8. #8
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: GA-X58A-UD7 - n00b OC settings

    Quote Originally Posted by k1llah3rtz View Post
    QPI/VTT Voltage 1.150v ............ 1.3 & 1.34
    try with 1.36000 also try with ram timings at 8-8-8-24-1T ,8-8-8-20 look a little too tight to me, try with looser then once stable tighten them later
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

  9. #9
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-X58A-UD7 - n00b OC settings

    Timings should be 999-20/24 for these speeds (Rated spec)

    You may need 1.375-1.425+ QPI/Vtt even at the rated specs, don't be scared

  10. #10
    Join Date
    Nov 2009
    Location
    Somewhere
    Posts
    300

    Default Re: GA-X58A-UD7 - n00b OC settings

    are the uncore and qpi link speed ok??

    new settings will be as follows, ok?:

    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Enabled]
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. [x36] = 6.69GHz
    Uncore Frequency .......................... [x20] = 3720
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) ..................... 186
    PCI Express Frequency (MHz) ........... [100]


    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Extreme]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [x10] = 1860
    DRAM Timing Selectable (SPD) .......... [Expert]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ...................... 9
    tRCD ....................................... 9
    tRP ......................................... 9
    tRAS ....................................... 24

    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Standard]
    CPU Vcore ............................... 1.25
    QPI/VTT Voltage 1.150v ............ 1.375
    CPU PLL 1.800v ....................... 1.800

    MCH/ICH
    PCIE 1.500v ........................... 1.500
    QPI PLL 1.100v ....................... 1.18
    IOH Core 1.100v ..................... 1.14
    ICH I/O 1.500v ....................... 1.500
    ICH Core 1.1v ........................ 1.100

    DRAM
    DRAM Voltage 1.500v .............. 1.66
    GA-X58A-UD7 rev1.0 - F9d // Intel i7 920 D0 @ 4.2Ghz - //vcore:Normal(1.2430v)+DVID+0.07500v//qpi_vtt:1.380v//bclk:200*21(turbo)
    6GB Corsair Dominator 1866 @ 1600 (9-9-9-24-2T@1.65v)


    CPU-Z Results: http://valid.canardpc.com/show_oc.php?id=2212669



Page 1 of 12 12311 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •