Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 45

Thread: Gigabyte X58 UD7 , Core I7 930 D0 and Corsair Dominator GT 2000MHz




  1. #21
    Join Date
    Apr 2010
    Location
    cyprus
    Posts
    21

    Default Re: Gigabyte X58 UD7 , Core I7 930 D0 and Corsair Dominator GT 2000MHz

    Khm yeah side panel windows are nice to see, but take temps high too ;)

    i have a haf 932 stock here as well, and its so good in cooling

  2. #22
    Join Date
    Nov 2009
    Location
    Somewhere
    Posts
    300

    Default Re: Gigabyte X58 UD7 , Core I7 930 D0 and Corsair Dominator GT 2000MHz

    i think i might take off the cooler, clean thoroughly and reapply...
    GA-X58A-UD7 rev1.0 - F9d // Intel i7 920 D0 @ 4.2Ghz - //vcore:Normal(1.2430v)+DVID+0.07500v//qpi_vtt:1.380v//bclk:200*21(turbo)
    6GB Corsair Dominator 1866 @ 1600 (9-9-9-24-2T@1.65v)


    CPU-Z Results: http://valid.canardpc.com/show_oc.php?id=2212669



  3. #23
    Join Date
    Apr 2010
    Location
    cyprus
    Posts
    21

    Default Re: Gigabyte X58 UD7 , Core I7 930 D0 and Corsair Dominator GT 2000MHz

    so can u tell me what volts you using to get 1866mhz mem ?

  4. #24
    Join Date
    Nov 2009
    Location
    Somewhere
    Posts
    300

    Default Re: Gigabyte X58 UD7 , Core I7 930 D0 and Corsair Dominator GT 2000MHz

    here you go:

    Advanced CPU Features:
    CPU Clock Ratio ................................ [20x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Enabled]
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. [x36] = 6.69GHz
    Uncore Frequency .......................... [x20] = 3720
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) ..................... 186
    PCI Express Frequency (MHz) ........... [100]


    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Extreme]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [x10] = 1860
    DRAM Timing Selectable (SPD) .......... [Expert]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ...................... 9
    tRCD ....................................... 9
    tRP ......................................... 9
    tRAS ....................................... 24
    CMD ....................................... 1T

    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Standard]
    CPU Vcore ............................... 1.225
    QPI/VTT Voltage 1.150v ............ 1.360
    CPU PLL 1.800v ....................... 1.800

    MCH/ICH
    PCIE 1.500v ........................... 1.500
    QPI PLL 1.100v ....................... 1.18
    IOH Core 1.100v ..................... 1.14
    ICH I/O 1.500v ....................... 1.500
    ICH Core 1.1v ........................ 1.100

    DRAM
    DRAM Voltage 1.500v .............. 1.66


    I'll be doing more tonight after work and post into http://forums.tweaktown.com/f69/ga-x...ettings-39097/

    Thanks and hope this helps.
    GA-X58A-UD7 rev1.0 - F9d // Intel i7 920 D0 @ 4.2Ghz - //vcore:Normal(1.2430v)+DVID+0.07500v//qpi_vtt:1.380v//bclk:200*21(turbo)
    6GB Corsair Dominator 1866 @ 1600 (9-9-9-24-2T@1.65v)


    CPU-Z Results: http://valid.canardpc.com/show_oc.php?id=2212669



  5. #25
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte X58 UD7 , Core I7 930 D0 and Corsair Dominator GT 2000MHz

    So do you still need help with settings?

    If so grab a template from my signature and give me your current ones you are having issues with and I will advise back.

  6. #26
    Join Date
    Apr 2010
    Location
    cyprus
    Posts
    21

    Default Re: Gigabyte X58 UD7 , Core I7 930 D0 and Corsair Dominator GT 2000MHz

    Quote Originally Posted by Lsdmeasap View Post
    So do you still need help with settings?

    If so grab a template from my signature and give me your current ones you are having issues with and I will advise back.
    There are my settings:

    ****BIOS VERSION: F6 ****

    Advanced CPU Features:
    CPU Clock Ratio ................................ [22x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Enabled]
    C3/C6/C7 State Support .................... [Enabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Enabled]
    Virtualization Technology ................... [Enabled]
    Bi-Directional PROCHOT ..................... [Enabled]
    Uncore & QPI Features:
    QPI Link Speed .............................. [Auto]
    Uncore Frequency .......................... [Auto]
    Isonchronous Frequency ..................[Enabled]
    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................[181]
    PCI Express Frequency (MHz) ........... [Auto]
    C.I.A.2 [Disabled]
    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
    Advanced DRAM Features:
    Performance Enhance ...................... [Extreme]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [.10]
    DRAM Timing Selectable (SPD) .......... [Expert]
    Channel A + B + C
    Channel A Timing Settings:
    ##Channel A Standard Timing Control## set to your rams spec ie
    CAS Latency Time ......................8
    tRCD .......................................8
    tRP .........................................8
    tRAS .......................................24
    ##Channel A Advanced Timing Control##
    tRC ........................................
    tRRD .......................................
    tWTR ......................................
    tWR .............
    tWTP .......................................
    tWL ........................................
    tRFC .......................................
    tRTP .......................................
    tFAW ......................................
    Command Rate (CMD) ................Auto
    ##Channel A Misc Timing Control##
    Round Trip Latency ...................
    Advanced Voltage Control:
    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ...............................[Auto] Mobo sets it to 1.36 @CPU-Z
    QPI/VTT Voltage 1.150v ............1.395
    CPU PLL 1.800v .......................1.88
    MCH/ICH
    PCIE 1.500v ...........................auto
    QPI PLL 1.100v .......................auto
    IOH Core 1.100v .....................auto
    ICH I/O 1.500v .......................auto
    ICH Core 1.1v ........................auto
    DRAM
    DRAM Voltage 1.64V
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

  7. #27
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte X58 UD7 , Core I7 930 D0 and Corsair Dominator GT 2000MHz

    Using odd CPU multi will work easier than even, so you may want to reconsider using 22

    Advanced CPU Features:
    CPU Clock Ratio ................................ [22x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Enabled] << Disabled
    C3/C6/C7 State Support .................... [Enabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Enabled] << Disabled
    Virtualization Technology ................... [Enabled]
    Bi-Directional PROCHOT ..................... [Enabled]

    Uncore & QPI Features:
    QPI Link Speed .............................. [Auto] << Set x36
    Uncore Frequency .......................... [Auto] << Set 20-22
    Isonchronous Frequency ..................[Enabled]

    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................[181]
    PCI Express Frequency (MHz) ........... [Auto] << Set 100
    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]

    Advanced DRAM Features:
    Performance Enhance ...................... [Extreme]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [.10]
    DRAM Timing Selectable (SPD) .......... [Expert]
    Channel A + B + C
    Channel A Timing Settings:
    ##Channel A Standard Timing Control## set to your rams spec ie
    CAS Latency Time ......................8
    tRCD .......................................8
    tRP .........................................8
    tRAS .......................................24
    ##Channel A Advanced Timing Control##
    tRC ........................................
    tRRD .......................................
    tWTR ......................................
    tWR .............
    tWTP .......................................
    tWL ........................................
    tRFC .......................................
    tRTP .......................................
    tFAW ......................................
    Command Rate (CMD) ................Auto << Set 1T
    ##Channel A Misc Timing Control##
    Round Trip Latency ...................

    Advanced Voltage Control:
    CPU
    Load Line Calibration ................. [Disabled] << Enabled
    CPU Vcore ...............................[Auto] Mobo sets it to 1.36 @CPU-Z << DO NOT USE AUTO HERE. Set manually, try 1.25-1.4
    QPI/VTT Voltage 1.150v ............1.395 << 1.35-1.45 should be plenty for 1800
    CPU PLL 1.800v .......................1.88

    MCH/ICH
    PCIE 1.500v ...........................auto
    QPI PLL 1.100v .......................auto << Set 1.16-1.24
    IOH Core 1.100v .....................auto << 1,14-1.24 can help
    ICH I/O 1.500v .......................auto
    ICH Core 1.1v ........................auto

    DRAM
    DRAM Voltage 1.64V << Set 1.66
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

  8. #28
    Join Date
    Apr 2010
    Location
    cyprus
    Posts
    21

    Default Re: Gigabyte X58 UD7 , Core I7 930 D0 and Corsair Dominator GT 2000MHz

    Okay thanks.
    Let me try and boot with those settings.

  9. #29
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte X58 UD7 , Core I7 930 D0 and Corsair Dominator GT 2000MHz

    K, good luck!

    I'll see ya later today or tonight, have to get outta here shortly

  10. #30
    Join Date
    Apr 2010
    Location
    cyprus
    Posts
    21

    Default Re: Gigabyte X58 UD7 , Core I7 930 D0 and Corsair Dominator GT 2000MHz

    Tried the settings below, after the Gigabyte logo , goes to Verifying DMI pool Data, LED Post displays 96 then C1 and restarts.

    Advanced CPU Features:
    CPU Clock Ratio ................................ [21x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Enabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Enabled]
    Bi-Directional PROCHOT ..................... [Enabled]

    Uncore & QPI Features:
    QPI Link Speed .............................. [x36]
    Uncore Frequency .......................... [22]
    Isonchronous Frequency ..................[Enabled]

    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................[195]
    PCI Express Frequency (MHz) ........... [100]
    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]

    Advanced DRAM Features:
    Performance Enhance ...................... [Extreme]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [.10]
    DRAM Timing Selectable (SPD) .......... [Expert]
    Channel A + B + C
    Channel A Timing Settings:
    ##Channel A Standard Timing Control## set to your rams spec ie
    CAS Latency Time ......................8
    tRCD .......................................8
    tRP .........................................8
    tRAS .......................................24
    ##Channel A Advanced Timing Control##
    tRC ........................................
    tRRD .......................................
    tWTR ......................................
    tWR .............
    tWTP .......................................
    tWL ........................................
    tRFC .......................................
    tRTP .......................................
    tFAW ......................................
    Command Rate (CMD) ................"1"<< Set 1T
    ##Channel A Misc Timing Control##
    Round Trip Latency ...................

    Advanced Voltage Control:
    CPU
    Load Line Calibration ................. [Profile1] << Enabled
    CPU Vcore ...............................[1.35]
    QPI/VTT Voltage 1.150v ............1.45
    CPU PLL 1.800v .......................1.88

    MCH/ICH
    PCIE 1.500v ...........................auto
    QPI PLL 1.100v .......................1.24
    IOH Core 1.100v .....................1.24
    ICH I/O 1.500v .......................auto
    ICH Core 1.1v ........................auto

    DRAM
    DRAM Voltage 1.66V
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

    So what the heck ? :)

Page 3 of 5 FirstFirst 12345 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •