Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 4 of 5 FirstFirst ... 2345 LastLast
Results 31 to 40 of 45

Thread: Gigabyte X58 UD7 , Core I7 930 D0 and Corsair Dominator GT 2000MHz




  1. #31
    Join Date
    Mar 2010
    Location
    UK
    Posts
    282

    Default Re: Gigabyte X58 UD7 , Core I7 930 D0 and Corsair Dominator GT 2000MHz

    Quote Originally Posted by b0ss View Post
    Tried the settings below, after the Gigabyte logo , goes to Verifying DMI pool Data, LED Post displays 96 then C1 and restarts.

    Advanced CPU Features:
    CPU Clock Ratio ................................ [21x]
    Intel(R) Turbo Boost Tech .................. [Enabled] - this should be disabled
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Enabled] << disable this
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Enabled] - Disable this unless you need it. causes more vcore to be used with it enabled
    Bi-Directional PROCHOT ..................... [Enabled]

    Uncore & QPI Features:
    QPI Link Speed .............................. [x36]
    Uncore Frequency .......................... [22]
    Isonchronous Frequency ..................[Enabled]

    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................[195]
    PCI Express Frequency (MHz) ........... [100]
    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]

    Advanced DRAM Features:
    Performance Enhance ...................... [Extreme]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [.10]
    DRAM Timing Selectable (SPD) .......... [Expert]
    Channel A + B + C
    Channel A Timing Settings:
    ##Channel A Standard Timing Control## set to your rams spec ie
    CAS Latency Time ......................8
    tRCD .......................................8
    tRP .........................................8
    tRAS .......................................24
    ##Channel A Advanced Timing Control##
    tRC ........................................
    tRRD .......................................
    tWTR ......................................
    tWR .............
    tWTP .......................................
    tWL ........................................
    tRFC .......................................
    tRTP .......................................
    tFAW ......................................
    Command Rate (CMD) ................"1"<< Set 1T
    ##Channel A Misc Timing Control##
    Round Trip Latency ...................

    Advanced Voltage Control:
    CPU
    Load Line Calibration ................. [Profile1] << Enabled (you have this on level 1 yes?)
    CPU Vcore ...............................[1.35]
    QPI/VTT Voltage 1.150v ............1.45
    CPU PLL 1.800v .......................1.88

    MCH/ICH
    PCIE 1.500v ...........................auto - Set it 1.540v
    QPI PLL 1.100v .......................1.24
    IOH Core 1.100v .....................1.24
    ICH I/O 1.500v .......................auto - set to 1.500v
    ICH Core 1.1v ........................auto set to 1.140v

    DRAM
    DRAM Voltage 1.66V
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

    So what the heck ? :)
    Could try the above and see if it makes a difference

  2. #32
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte X58 UD7 , Core I7 930 D0 and Corsair Dominator GT 2000MHz

    Have any luck yet? If not try x21 multi only and 1.3-1.45 Vcore, with turbo disabled.

    The above settings are 4.3Ghz if you guys didn't notice, so that could be the issue

    Your memory is also CAS 9, so you may want to try that first for now until you get going, then you can try CAS 8

  3. #33
    Join Date
    Apr 2010
    Location
    cyprus
    Posts
    21

    Default Re: Gigabyte X58 UD7 , Core I7 930 D0 and Corsair Dominator GT 2000MHz

    Hi just wanted to say i tried those settings below and damn that was a disaster.
    i had to clear cmos to reboot.
    C1 error on the LED post and pc wouldnt even start. also tried 9-9-9-24 latencies and had the same issue.
    Damn anyone ?

    Advanced CPU Features:
    CPU Clock Ratio ................................ [21x]
    Intel(R) Turbo Boost Tech .................. [Disabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Disabled] - Disable this unless you need it. causes more vcore to be used with it enabled
    Bi-Directional PROCHOT ..................... [Enabled]

    Uncore & QPI Features:
    QPI Link Speed .............................. [x36]
    Uncore Frequency .......................... [22]
    Isonchronous Frequency ..................[Enabled]

    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................[195]
    PCI Express Frequency (MHz) ........... [100]
    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]

    Advanced DRAM Features:
    Performance Enhance ...................... [Extreme]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [.10]
    DRAM Timing Selectable (SPD) .......... [Expert]
    Channel A + B + C
    Channel A Timing Settings:
    ##Channel A Standard Timing Control## set to your rams spec ie
    CAS Latency Time ......................8
    tRCD .......................................8
    tRP .........................................8
    tRAS .......................................24
    ##Channel A Advanced Timing Control##
    tRC ........................................
    tRRD .......................................
    tWTR ......................................
    tWR .............
    tWTP .......................................
    tWL ........................................
    tRFC .......................................
    tRTP .......................................
    tFAW ......................................
    Command Rate (CMD) ................"1"
    ##Channel A Misc Timing Control##
    Round Trip Latency ...................

    Advanced Voltage Control:
    CPU
    Load Line Calibration ................. [Level1]
    CPU Vcore ...............................[1.35]
    QPI/VTT Voltage 1.150v ............1.45
    CPU PLL 1.800v .......................1.88

    MCH/ICH
    PCIE 1.500v ...........................1.540v
    QPI PLL 1.100v .......................1.24
    IOH Core 1.100v .....................1.24
    ICH I/O 1.500v .......................1.500v
    ICH Core 1.1v ........................1.140v

    DRAM
    DRAM Voltage 1.64V & 1.66V Both tested
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

  4. #34
    Join Date
    Apr 2010
    Location
    cyprus
    Posts
    21

    Default Re: Gigabyte X58 UD7 , Core I7 930 D0 and Corsair Dominator GT 2000MHz

    So to sum up those are the stable settings i could run my system.
    One thing to note is when setting the QPI Link speed to x26 and QPI Uncore Frequency to manual values this is where the problem begins even when the settings i run now.
    Those are:

    Advanced CPU Features:
    CPU Clock Ratio ................................ [22x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Enabled]
    C3/C6/C7 State Support .................... [Enabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Enabled]
    Virtualization Technology ................... [Enabled]
    Bi-Directional PROCHOT ..................... [Enabled]
    Uncore & QPI Features:
    QPI Link Speed .............................. [Auto]
    Uncore Frequency .......................... [Auto]
    Isonchronous Frequency ..................[Enabled]
    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) .....................[181]
    PCI Express Frequency (MHz) ........... [Auto]
    C.I.A.2 [Disabled]
    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
    Advanced DRAM Features:
    Performance Enhance ...................... [Extreme]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [.10]
    DRAM Timing Selectable (SPD) .......... [Expert]
    Channel A + B + C
    Channel A Timing Settings:
    ##Channel A Standard Timing Control## set to your rams spec ie
    CAS Latency Time ......................8
    tRCD .......................................8
    tRP .........................................8
    tRAS .......................................24
    ##Channel A Advanced Timing Control##
    tRC ........................................
    tRRD .......................................
    tWTR ......................................
    tWR .............
    tWTP .......................................
    tWL ........................................
    tRFC .......................................
    tRTP .......................................
    tFAW ......................................
    Command Rate (CMD) ................1
    ##Channel A Misc Timing Control##
    Round Trip Latency ...................
    Advanced Voltage Control:
    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ...............................[1.35] with CPU-Z i red 1.312 and everest cpu id though @ full load ?!
    QPI/VTT Voltage 1.150v ............1.395 (even at 1.375 blue screen crash with Linx after 20secs so i left it to 1.395)
    CPU PLL 1.800v .......................1.88
    MCH/ICH
    PCIE 1.500v ...........................auto
    QPI PLL 1.100v .......................auto
    IOH Core 1.100v .....................auto
    ICH I/O 1.500v .......................auto
    ICH Core 1.1v ........................auto
    DRAM
    DRAM Voltage 1.64V
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

  5. #35
    Join Date
    Apr 2010
    Location
    cyprus
    Posts
    21

    Default Re: Gigabyte X58 UD7 , Core I7 930 D0 and Corsair Dominator GT 2000MHz

    Next theres a screen shot of my pc running prime95.
    Notice the 1.280v, and now at idle cpu-z displays 1.318v. ;p i mean what is going on pls ?


  6. #36
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: Gigabyte X58 UD7 , Core I7 930 D0 and Corsair Dominator GT 2000MHz

    ^^^ its caused by vdroop,the cpu is sucking power under load causing your voltages to drop slightly,you have llc(load line calibration)enabled? it helps to prevent this,also i see you have c1e and eist enabled this will also reduce cpu voltage so that the cpu will only use the amount it needs according to load so that also could be why your seeing less cpu voltage, this is normal you dont need to enable llc only for 4ghz+ clocks
    Last edited by warren300; 04-19-2010 at 10:33 PM.
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

  7. #37
    Join Date
    Apr 2010
    Location
    cyprus
    Posts
    21

    Default Re: Gigabyte X58 UD7 , Core I7 930 D0 and Corsair Dominator GT 2000MHz

    Hmmm yes i have all those features enabled, as i feel for my cpu and dont want it to use full volt all the time ;)
    Ok then i got this now.

    1900Mhz and 4ghz seems like a faraway galaxy for me now :D

  8. #38
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: Gigabyte X58 UD7 , Core I7 930 D0 and Corsair Dominator GT 2000MHz

    just keep testing and raising qpi/vtt and cpu v one click at a time untill no more crashes
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

  9. #39
    Join Date
    Apr 2010
    Location
    cyprus
    Posts
    21

    Default Re: Gigabyte X58 UD7 , Core I7 930 D0 and Corsair Dominator GT 2000MHz

    Haha, yes thats 1 option.
    Id like a stable 24/7 system too though without frying burgers on it :D

  10. #40
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: Gigabyte X58 UD7 , Core I7 930 D0 and Corsair Dominator GT 2000MHz

    well i know its hot in cyprus hotter than the uk but aslong as you have good cooling you should be able to reach 4ghz safely,try doing it in stages like 3.8ghz get that stable then 3.9ghz then 4ghz
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

Page 4 of 5 FirstFirst ... 2345 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •