Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 23

Thread: Wolfdale Overclocking with the GA-EP45-UD3P




  1. #11
    Join Date
    Apr 2010
    Location
    Brazil
    Posts
    11

    Default Re: Wolfdale Overclocking with the GA-EP45-UD3P

    Hey there Chike,

    I've just enable LLC and it ran Orthos (430 FSB) for about 1 hour in all three modes.

    Now I'm heading to 440 FSB and got the exact error output I was having before (was 0.5, expected 0.4). So I started tweaking the references as you've recomended and here's the output I've got from Orthos:

    CPU Termination: [1.280V]
    CPU Reference: [Auto]
    MCH Reference: [0.810V]
    @10s; small FFTs: "was 0.46875, expected less than 0.4"
    @05s; small FFTs: "was 0.5, expected less than 0.4"
    @07s; large FFTs: "was 0.49609375, expected less than 0.4"
    @31s; large FFTs: "was 0.5, expected less than 0.4"

    CPU Termination: [1.280V]
    CPU Reference: [0.810V]
    MCH Reference: [Auto]
    @24s; small FFTs: "was 0.5, expected less than 0.4"
    @07s; small FFTs: "was 0.5, expected less than 0.4"
    @21s; large FFTs: "was 0.5, expected less than 0.4"
    @10s; large FFTs: the system crashed (BSOD)

    Thanks a lot man.

  2. #12
    Join Date
    Apr 2010
    Location
    Brazil
    Posts
    11

    Default Re: Wolfdale Overclocking with the GA-EP45-UD3P

    Quote Originally Posted by Lsdmeasap View Post
    Try these and see how you get along

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------------- : [Auto or Fast] 
    CPU Clock Ratio ---------------------- : [9x]
    Fine CPU Clock Ratio ----------------- : [0.0] 
    CPU Frequency ---------------------: 4Ghz
    
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control --------------- : [Enabled]
    CPU Host Frequency (Mhz) --------------: [450]
    PCI Express Frequency (Mhz) ---------- : [100] 
    C.I.A.2 ------------------------------ : [Disabled]
    
    Advanced Clock Control ------- [Press Enter]
    CPU Clock Drive ---------------------- : <<< 800
    PCI Express Clock Drive -------------- : <<< 900
    CPU Clock Skew (ps) ------------------ : <<<
    MCH Clock Skew (ps) ------------------ : <<<
    
    DRAM Performance Control
    Performance Enhance ------------------- : [Standard] 
    Extreme Memory Profile --- (X.M.P.) --- : [Disabled] 
    (G)MCH Frequency Latch ---------------- : [333MHz]  << Auto
    System Memory Multiplier -------------- : [2.40B]  << 2.00D (can try 2.00B/2.40B later, not all memory can run B multi's above 400 FSB)
    Memory Frequency (Mhz) ---------------- : 900 for now, see above
    DRAM Timing Selectable ---------------- : [Manual] 
    
    Standard Timing Control
    CAS Latency Time -------- 5 ---------- : 5
    tRCD  ------------------- 7 ---------- : 5
    tRP --------------------- 7 ---------- :  5
    tRAS  ------------------- 24 ---------- : 12-15
    
    Advanced Timing Control
    tRRD  ------------------- 4 ---------- : 3-4
    tWTR  ------------------- 4 ---------- : 3-6
    tWR --------------------- 8 ---------- : 4-6
    tRFC  ------------------- 68 ---------- : 52-62
    tRTP  ------------------- 4 ---------- : 3-4
    Command Rate (CMD) -------------------- : [Auto] < 2
    
    Driving Strength Profiles
    Driving Strength --------- : 1066 
    
    Channel A
    Static tRead Value --------------------- : [10]  << 9 for now
    tRD Phase0 Adjustment ------------------ : [Auto] 
    tRD Phase1 Adjustment ------------------ : [Auto]
    tRD Phase2 Adjustment ------------------ : [Auto]
    tRD Phase3 Adjustment ------------------ : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ----------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ----------------- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto]  
    Dimm2 Clock Skew Control --------------- : [Auto]  
    
    Channel B
    Static tRead Value --------------------- : [10]  << 9 for now
    tRD Phase0 Adjustment ------------------ : [Auto] 
    tRD Phase1 Adjustment ------------------ : [Auto]
    tRD Phase2 Adjustment ------------------ : [Auto]
    tRD Phase3 Adjustment ------------------ : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ----------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ----------------- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto]  
    Dimm2 Clock Skew Control --------------- : [Auto]  
    
    Motherboard Voltage Control
    CPU
    Voltage Types------------ Normal -------- Current -----
    Load-Line Calibration ----------------- : [Disabled]  << Enabled
    CPU Vcore --------------- 1.225V  ---- : [1.350V]   << 1.3-1.44 (Above 1.35 suggestion does not matter, your CPU may need more than any other, they are all different)  I had to use 1.4 and 1.425 on 2 different 8400's I have to run 4Ghz
    CPU Termination --------- 1.200V ----- : [1.280V]  << 1.26-1.34
    CPU PLL ----------------- 1.500V ----- : [1.590V]   << 1.5-1.54
    CPU Reference ----------- 0.760V ----- : [Auto]
     
    MCH/ICH
    MCH Core ---------------- 1.100V ------- : [1.260V]  << 1.2-1.24
    MCH Reference ----------- 0.760V ------- : [Auto]
    MCH/DRAM Ref ------------ 0.900V  ------ : [Auto]
    ICH I/O ----------------- 1.500V ------- : [1.500V] 
    ICH Core ---------------- 1.100V ------- : [1.100V] 
    
    DRAM
    DRAM Voltage ------------ 1.800V ------- : 2.0-2.1
    DRAM Termination -------- 0.900V ------- : [Auto]
    Channel A Reference ----- 0.900V ------- : [Auto]
    Channel B Reference ----- 0.900V ------- : [Auto]
    Hi there man,

    well I've tryed that exact setting and couldn't get the PC powered on. I've changed the ram multi to 2.40B and it did powered on, however it rebooted during Windows boots. Again, I've changed to 2.00B and it didn't post.

    Thanks in advance.

  3. #13
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Wolfdale Overclocking with the GA-EP45-UD3P

    What vcore were you trying?

    I gave a lot of ranges there, so you saying you tried does not help me to help you get going. I need to know what all settings you tried exactly.

  4. #14
    Join Date
    Apr 2010
    Location
    Brazil
    Posts
    11

    Default Re: Wolfdale Overclocking with the GA-EP45-UD3P

    Oh yeah, sorry man. Oh and btw, I've just tryed this again and still crashed (BSOD) when loading Windows.

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------------- : [Auto or Fast] 
    CPU Clock Ratio ---------------------- : [9x]
    Fine CPU Clock Ratio ----------------- : [0.0] 
    CPU Frequency ---------------------: 4Ghz
    
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control --------------- : [Enabled]
    CPU Host Frequency (Mhz) --------------: [450]
    PCI Express Frequency (Mhz) ---------- : [100] 
    C.I.A.2 ------------------------------ : [Disabled]
    
    Advanced Clock Control ------- [Press Enter]
    CPU Clock Drive ---------------------- : <<< 800
    PCI Express Clock Drive -------------- : <<< 900
    CPU Clock Skew (ps) ------------------ : <<<
    MCH Clock Skew (ps) ------------------ : <<<
    
    DRAM Performance Control
    Performance Enhance ------------------- : [Standard] 
    Extreme Memory Profile --- (X.M.P.) --- : [Disabled] 
    (G)MCH Frequency Latch ---------------- : [Auto] 
    System Memory Multiplier -------------- : [2.00D] 
    Memory Frequency (Mhz) ---------------- : 900
    DRAM Timing Selectable ---------------- : [Manual] 
    
    Standard Timing Control
    CAS Latency Time -------- 5 ---------- : 5
    tRCD  ------------------- 7 ---------- : 5
    tRP --------------------- 7 ---------- :  5
    tRAS  ------------------- 24 ---------- : 15
    
    Advanced Timing Control
    tRRD  ------------------- 4 ---------- : 3-4
    tWTR  ------------------- 4 ---------- : 3-6
    tWR --------------------- 8 ---------- : 4-6
    tRFC  ------------------- 68 ---------- : 52-62
    tRTP  ------------------- 4 ---------- : 3-4
    Command Rate (CMD) -------------------- : [Auto] < 2
    
    Driving Strength Profiles
    Driving Strength --------- : 1066 
    
    Channel A
    Static tRead Value --------------------- : [9] 
    tRD Phase0 Adjustment ------------------ : [Auto] 
    tRD Phase1 Adjustment ------------------ : [Auto]
    tRD Phase2 Adjustment ------------------ : [Auto]
    tRD Phase3 Adjustment ------------------ : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ----------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ----------------- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto]  
    Dimm2 Clock Skew Control --------------- : [Auto]  
    
    Channel B
    Static tRead Value --------------------- : [9]
    tRD Phase0 Adjustment ------------------ : [Auto] 
    tRD Phase1 Adjustment ------------------ : [Auto]
    tRD Phase2 Adjustment ------------------ : [Auto]
    tRD Phase3 Adjustment ------------------ : [Auto]
    Trd2rd(Different Rank) ----------------- : [Auto]
    Twr2wr(Different Rank) ----------------- : [Auto]
    Twr2rd(Different Rank) ----------------- : [Auto]
    Trd2wr(Same/Diff Rank) ----------------- : [Auto]
    Dimm1 Clock Skew Control --------------- : [Auto]  
    Dimm2 Clock Skew Control --------------- : [Auto]  
    
    Motherboard Voltage Control
    CPU
    Voltage Types------------ Normal -------- Current -----
    Load-Line Calibration ----------------- : [Enabled] 
    CPU Vcore --------------- 1.225V  ---- : [1.400V]
    CPU Termination --------- 1.200V ----- : [1.320V]
    CPU PLL ----------------- 1.500V ----- : [1.500V]
    CPU Reference ----------- 0.760V ----- : [Auto]
     
    MCH/ICH
    MCH Core ---------------- 1.100V ------- : [1.220V]
    MCH Reference ----------- 0.760V ------- : [Auto]
    MCH/DRAM Ref ------------ 0.900V  ------ : [Auto]
    ICH I/O ----------------- 1.500V ------- : [1.500V] 
    ICH Core ---------------- 1.100V ------- : [1.100V] 
    
    DRAM
    DRAM Voltage ------------ 1.800V ------- : [2.100V]
    DRAM Termination -------- 0.900V ------- : [Auto]
    Channel A Reference ----- 0.900V ------- : [Auto]
    Channel B Reference ----- 0.900V ------- : [Auto]

  5. #15
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Wolfdale Overclocking with the GA-EP45-UD3P

    Ahh, what was the BSOD code? It looks like this 0x00000101 for example, and should be in the middle left side of the screen on BSOD.

    Only the last three numbers matter to me, if you can catch what those are that would be great before I advise back on what might help.

  6. #16
    Join Date
    Apr 2010
    Location
    Brazil
    Posts
    11

    Default Re: Wolfdale Overclocking with the GA-EP45-UD3P

    0x00000050 is the BSOD error!

  7. #17
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Wolfdale Overclocking with the GA-EP45-UD3P

    Thanks, try these changes with 2.00D first, or 2.00B multiplier

    CPU Termination --------- 1.200V ----- : [1.320V] << 1.34 if no luck try 1.28
    CPU PLL ----------------- 1.500V ----- : [1.500V] << 1.54
    CPU Reference ----------- 0.760V ----- : [Auto]

    MCH/ICH
    MCH Core ---------------- 1.100V ------- : [1.220V] << 1.24-1.26
    MCH Reference ----------- 0.760V ------- : [Auto]
    MCH/DRAM Ref ------------ 0.900V ------ : [Auto]
    ICH I/O ----------------- 1.500V ------- : [1.500V]
    ICH Core ---------------- 1.100V ------- : [1.100V] << 1.14

  8. #18
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Wolfdale Overclocking with the GA-EP45-UD3P

    Quote Originally Posted by ViPPeR_666 View Post
    Hey there Chike,

    I've just enable LLC and it ran Orthos (430 FSB) for about 1 hour in all three modes.

    Now I'm heading to 440 FSB and got the exact error output I was having before (was 0.5, expected 0.4). So I started tweaking the references as you've recomended and here's the output I've got from Orthos:

    CPU Termination: [1.280V]
    CPU Reference: [Auto]
    MCH Reference: [0.810V]
    @10s; small FFTs: "was 0.46875, expected less than 0.4"
    @05s; small FFTs: "was 0.5, expected less than 0.4"
    @07s; large FFTs: "was 0.49609375, expected less than 0.4"
    @31s; large FFTs: "was 0.5, expected less than 0.4"

    CPU Termination: [1.280V]
    CPU Reference: [0.810V]
    MCH Reference: [Auto]
    @24s; small FFTs: "was 0.5, expected less than 0.4"
    @07s; small FFTs: "was 0.5, expected less than 0.4"
    @21s; large FFTs: "was 0.5, expected less than 0.4"
    @10s; large FFTs: the system crashed (BSOD)

    Thanks a lot man.
    Habe you tried uppin the VTT first?

    0.810 @ 1.28v VTT is just the default 0.72 $ 1.2v VTT.
    For the MCH Reference try 0.74, 0.72, and 0.70 @ 1.2v VTT, the 0.78, 0.800, and 0.820.

  9. #19
    Join Date
    Apr 2010
    Location
    Brazil
    Posts
    11

    Default Re: Wolfdale Overclocking with the GA-EP45-UD3P

    It's still rebooting when loading Windows. Here's what I've tryed:

    CPU Termination --------- 1.200V ----- : [1.340V] << I've tryed with 1.28V too and it didn't powered on
    CPU PLL ----------------- 1.500V ----- : [1.570V] << The next value after 1.500V is 1.570V, so I can't try the 1.540V
    CPU Reference ----------- 0.760V ----- : [Auto]

    MCH/ICH
    MCH Core ---------------- 1.100V ------- : [1.240V] << Tryed 1.26V too but didn't powered on
    MCH Reference ----------- 0.760V ------- : [Auto]
    MCH/DRAM Ref ------------ 0.900V ------ : [Auto]
    ICH I/O ----------------- 1.500V ------- : [1.500V]
    ICH Core ---------------- 1.100V ------- : [1.200V] << I couldn't use 1.14V because after 1.100V it's only 1.200V


    Thanks man.

  10. #20
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Wolfdale Overclocking with the GA-EP45-UD3P

    Ok, go ahead and try 1.57 PLL, and 1.2 ICH Core.

    Also try 1.0-1.05 MCH (Less than stock), some boards need this instead of the usual 1.2-1.24

Page 2 of 3 FirstFirst 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •