Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 36

Thread: GA-X58A-UD3R Ram issue with win7 64 bit




  1. #11
    Join Date
    Apr 2010
    Location
    Canada, QC
    Posts
    25

    Default Re: GA-X58A-UD3R Ram issue with win7 64 bit

    The Template, like I said I'm new in tweak but I'm here to learn ;)

    Advanced CPU Features:
    CPU Clock Ratio ................................ [21x] 133x21
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Enabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Enabled]
    Virtualization Technology ................... [Enabled]
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. [Auto]
    Uncore Frequency .......................... [Auto]
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Disabled]
    BCLK Frequency (MHz) .....................[133]
    PCI Express Frequency (MHz) ........... [Auto]

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[700mV]
    PCI Express Clock Drive ................... [700mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Turbo]
    Extreme Memory Profile (X.M.P) ......... [Profile1]
    System Memory Multiplier (SPD) ........ [AUTO]
    DRAM Timing Selectable (SPD) .......... [Auto]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................[8]
    tRCD .......................................[8]
    tRP .........................................[8]
    tRAS .......................................[24]

    Below values may be left in Auto if you like, generally this is fine. For those users who DO Set advanced timings manually, please see some of my thoughts and findings about these settings and rules here
    XtremeSystems Forums - View Single Post - Gigabyte EX58-UD5/Extreme Discussion Thread

    ##Channel A Advanced Timing Control##
    tRC ........................................[41]
    tRRD .......................................[6]
    tWTR ......................................[6]
    tWR ........................................[12]
    tWTP .......................................[24]
    tWL ........................................[8]
    tRFC .......................................[88]
    tRTP .......................................[6]
    tFAW ......................................[30]
    Command Rate (CMD) ................[2]

    ##Channel A Misc Timing Control## [-]
    Round Trip Latency ................... [-]



    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Standart]
    CPU Vcore ...............................[1.2625v]
    QPI/VTT Voltage 1.150v ............[1.175v]
    CPU PLL 1.800v .......................[1.800v]

    MCH/ICH
    PCIE 1.500v ...........................
    QPI PLL 1.100v .......................
    IOH Core 1.100v .....................
    ICH I/O 1.500v .......................
    ICH Core 1.1v ........................

    DRAM
    DRAM Voltage 1.500v ..............
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

  2. #12
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-X58A-UD3R Ram issue with win7 64 bit

    Yes, you have a missing channel as I though. This has many causes as mentioned above, here is a thread Eva2000 made about this
    Asus X58 + 6/12GB memory overclocking - detecting less memory than installed - i4memory.com - different look at memory

    If you are SURE you do not have a short caused by your backplate, or any bent CPU Socket pins, then please give us your full settings so we can advise you what to try. Template is in my signature for you to give us your settings as this can also be caused by incorrect settings.

  3. #13
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-X58A-UD3R Ram issue with win7 64 bit

    First off, please go into the BIOS and load Optimize Defaults, then save/apply/F10 and reboot BACK to the BIOS. Once in the BIOS please go reset your SATA/Disk settings again, this is very important if you are using RAID.

    Once you have done that, please give me your new settings. I can't advise now because you are using Fail Safe settings, and I want you to start with optimized, then I will advise.

    Fail Safe alone may be the cause, but I doubt it, you need to set several things that you aren't

  4. #14
    Join Date
    Apr 2010
    Location
    Canada, QC
    Posts
    25

    Default Re: GA-X58A-UD3R Ram issue with win7 64 bit

    Advanced CPU Features:
    CPU Clock Ratio ................................ [21x] 133x21
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Enabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Enabled]
    Virtualization Technology ................... [Enabled]
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. [Auto]
    Uncore Frequency .......................... [Auto]
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Disabled]
    BCLK Frequency (MHz) .....................[133]
    PCI Express Frequency (MHz) ........... [Auto]

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Turbo]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [Auto]
    DRAM Timing Selectable (SPD) .......... [Auto]
    Memory Frequency(Mhz).................. 1066

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................[8]
    tRCD .......................................[8]
    tRP .........................................[8]
    tRAS .......................................[20]

    Below values may be left in Auto if you like, generally this is fine. For those users who DO Set advanced timings manually, please see some of my thoughts and findings about these settings and rules here
    XtremeSystems Forums - View Single Post - Gigabyte EX58-UD5/Extreme Discussion Thread

    ##Channel A Advanced Timing Control##
    tRC ........................................[27]
    tRRD .......................................[4]
    tWTR ......................................[4]
    tWR ........................................[8]
    tWTP .......................................[19]
    tWL ........................................[7]
    tRFC .......................................[60]
    tRTP .......................................[4]
    tFAW ......................................[20]
    Command Rate (CMD) ................[1]

    ##Channel A Misc Timing Control## [-]
    Round Trip Latency ................... [-]



    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Standard]
    CPU Vcore ...............................[1.2625v]
    QPI/VTT Voltage 1.150v ............[1.175v]
    CPU PLL 1.800v .......................[1.800v]

    MCH/ICH
    PCIE 1.500v ...........................
    QPI PLL 1.100v .......................
    IOH Core 1.100v .....................
    ICH I/O 1.500v .......................
    ICH Core 1.1v ........................

    DRAM
    DRAM Voltage 1.500v ..............
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

  5. #15
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-X58A-UD3R Ram issue with win7 64 bit

    Thanks, try these!

    By the way, after you did that, could you see all 3 channel MAIN timings in the BIOS? If so, problem corrected by loading optimized instead of fail safe

    CPU Clock Ratio ................................ [21x] 133x21
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Enabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Enabled]
    Virtualization ................... [Enabled]
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. [Auto] << Set x36 or x44 (for 133 Bclk)
    Uncore Frequency .......................... [Auto] << set x24-26
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Disabled]
    BCLK Frequency (MHz) .....................[133]
    PCI Express Frequency (MHz) ........... [Auto]

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Turbo] << or Extreme
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ [Auto] << Set x12 for 1600Mhz
    DRAM Timing Selectable (SPD) .......... [Auto] << manual, Expert
    Memory Frequency(Mhz).................. 1066

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ......................[8]
    tRCD .......................................[8]
    tRP .........................................[8]
    tRAS .......................................[20/24]

    Below values may be left in Auto if you like, generally this is fine. For those users who DO Set advanced timings manually, please see some of my thoughts and findings about these settings and rules here
    XtremeSystems Forums - View Single Post - Gigabyte EX58-UD5/Extreme Discussion Thread

    ##Channel A Advanced Timing Control##
    tRC ........................................[27]
    tRRD .......................................[4]
    tWTR ......................................[4]
    tWR ........................................[8]
    tWTP .......................................[19]
    tWL ........................................[7]
    tRFC .......................................[60]
    tRTP .......................................[4]
    tFAW ......................................[02]
    Command Rate (CMD) ................[1]

    ##Channel A Misc Timing Control## [-]
    Round Trip Latency ................... [-]



    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Standard]
    CPU Vcore ...............................[1.2625v]
    QPI/VTT Voltage 1.150v ............[1.175v] << Here is part of the problem likely. Set 1.25-1.4
    CPU PLL 1.800v .......................[1.800v]

    MCH/ICH
    PCIE 1.500v ...........................
    QPI PLL 1.100v ....................... 1.16-1.24
    IOH Core 1.100v ..................... 1.14-1.24
    ICH I/O 1.500v .......................
    ICH Core 1.1v ........................

    DRAM
    DRAM Voltage 1.500v .............. 1.66
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

  6. #16
    Join Date
    Apr 2010
    Location
    Canada, QC
    Posts
    25

    Default Re: GA-X58A-UD3R Ram issue with win7 64 bit

    Quote Originally Posted by warren300 View Post
    just check anyway to be 100% sure,it could be a faulty module aswell,ive had a faulty ram module and it still showed 6gb in windows but when i tested with the method above it wouldnt boot and showed c1 error on mb clock

    this is what it should looklike in task manager and resource monitor,also look in bios screen andsee if it shows 6gb and not 4
    I tested this and the first module DDR3_1 dont boot, black screen, but DDR3_3 and DDR3_5 yes... what should I do?

  7. #17
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: GA-X58A-UD3R Ram issue with win7 64 bit

    few things to try are re-seating cpu,you know the pull down clamp pin? loosen it and pull back down again,second is to check cpu heatsink isnt overtightened so undo the backplate screws a quarter of a turn on each,if that doesnt fix it i would consider an rma for a faulty ram socket...just to let you know ive been through the very same thing as you but reseating my cpu fixed it,i had 4gb usable in windows,2gb hardware reserved exact same symptoms,but dont rule out a faulty ram slot.blow the cpu socket aswell as i had a hair in mine,im not sure that it caused my problems but it wouldnt of helped
    Last edited by warren300; 04-16-2010 at 08:12 PM.
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

  8. #18
    Join Date
    Apr 2010
    Location
    Canada, QC
    Posts
    25

    Default Re: GA-X58A-UD3R Ram issue with win7 64 bit

    I did all of these things and nothing work :( Ill RMA the motherboard and wait 1 month for my new pc :(

    A very big thx for your helps and tips guys. Ill learn a lot on this forum about pc and tweak ;)

  9. #19
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: GA-X58A-UD3R Ram issue with win7 64 bit

    it will take roughly two to three weeks for you to get a working board again,there pretty quick
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

  10. #20
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: GA-X58A-UD3R Ram issue with win7 64 bit

    Yeap, if you RMA it should take 2-3 weeks, depending on how long CA customs hold it.

    You will RMA with Gigabyte in California, at least I believe all of Canada does, let me know if you need the RMA page

Page 2 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •