Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 31

Thread: Another Q9550 + EP45-UD3R Oveclocking.




  1. #11
    Join Date
    Dec 2008
    Posts
    38

    Default Re: Another Q9550 + EP45-UD3R Oveclocking.

    Quote Originally Posted by Chike View Post
    You mean slots 2 & 4, or slots 3 & 4?
    Slots 2 & 4 are still channels A and B.
    I use red slots for memory (2 & 4 i think)

  2. #12
    Join Date
    Dec 2008
    Posts
    38

    Default Re: Another Q9550 + EP45-UD3R Oveclocking.

    Quote Originally Posted by Chike View Post
    @APC1
    Could you post a screen capture of EasyTune -> Tuner -> Advanced -> voltage tab? I'd like to see what The reference values are set to with normal settings.
    You don't have 0.76 values for the references because your VTT is 1.28v, you need to set them when VTT is set to 1.2v. Anyway leave them on auto unless you change them.
    I don´t have installed easy tune but if you need know some refernece voltage ask for it and i tell you

    Thanks
    Last edited by APC1; 04-16-2010 at 07:53 PM.

  3. #13
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Another Q9550 + EP45-UD3R Oveclocking.

    In your template some of the references were set to normal and I'd like to know what they are actually set to.

  4. #14
    Join Date
    Dec 2008
    Posts
    38

    Default Re: Another Q9550 + EP45-UD3R Oveclocking.

    Quote Originally Posted by Chike View Post
    In your template some of the references were set to normal and I'd like to know what they are actually set to.
    Where I set Normal I change and I set AUTO
    Last edited by APC1; 04-16-2010 at 10:11 PM.

  5. #15
    Join Date
    Dec 2008
    Posts
    38

    Default Re: Another Q9550 + EP45-UD3R Oveclocking.

    Hello

    All setting I have tried to set memories a 1133 (2.66D) fails and crash starting Pc at safe setting.

    I think that this memoris are difficult to setting. I find this but i don´t understand and i don´t know if it is useful.

    OCZ Flex II - Life at 1200MHz - AnandTech :: Your Source for Hardware Analysis and News

  6. #16
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Another Q9550 + EP45-UD3R Oveclocking.

    Try XMP profile if you have it with all timings auto, DRAM Voltage2.1-2.12v, and Static tRead Value 9.

  7. #17
    Join Date
    Dec 2008
    Posts
    38

    Default Re: Another Q9550 + EP45-UD3R Oveclocking.

    Quote Originally Posted by Chike View Post
    Try XMP profile if you have it with all timings auto, DRAM Voltage2.1-2.12v, and Static tRead Value 9.
    I don´t have XPM profile.

  8. #18
    Join Date
    Dec 2008
    Posts
    38

    Default Re: Another Q9550 + EP45-UD3R Oveclocking.

    I´m confused with this setting

    CPU Reference.....0.760............ Is rigth if I set AUTO?


    MCH Reference.....0.760............ Have I to set AUTO or a concrete value? I set 0.810

    MCH/DRAM Reference.....0.900......Have I to set AUTO or a concrete value? I set 0.900

    Thanks
    Last edited by APC1; 04-16-2010 at 11:30 PM.

  9. #19
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Another Q9550 + EP45-UD3R Oveclocking.

    Leave the reference voltages and DRAM Remination auto unless you need to tweak them.

    If you don't have XMP then just set standard timings and leave advanced timings on auto for now.

  10. #20
    Join Date
    Dec 2008
    Posts
    38

    Default Re: Another Q9550 + EP45-UD3R Oveclocking.

    Hello

    I have read & understang something aboout refernce valuues but it is very difficult for me

    Ok I have made same changes and I get 3.8 GHZ. Here my settings

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio .......................: 8
    Fine CPU Clock Ratio...................: +0.5
    CPU Frequency .........................: 3.8 GHz (448x8.5)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 448 Mhz
    PCI Express Frequency (Mhz) .........: 100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800
    PCI Express Clock Drive.................: 900
    CPU Clock Skew (ps)....................: 0 ps
    MCH Clock Skew (ps)...................: 0 ps


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled - I don´t Have this setting
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 2.40B
    Memory Frequency (Mhz) ..............: 800 - 1020
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5
    tRCD .........................................5
    tRP'...........................................5
    tRAS..........................................18


    Advanced Timing Control
    tRRD.........................3..................[Auto]
    tWTR.........................3..................[Auto]
    tWR..........................6..................[Auto]
    tRFC.........................54..................[Auto]
    tRTP.........................3...................[Auto]
    Command Rate (CMD) ..........0..........: 2

    Driving Strength Profiles
    Driving Strength ............................

    Channel A
    Static tRead Value.........................:[Auto]
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:[Auto]
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)................. .:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control

    CPU
    Loadline Calibration...................:[Enabled]
    CPU Vcore….………...............1.2125..........:1.2065
    CPU Termination…..... 1.200V*.......: 1.280v
    CPU PLL…………………....1.500V*.......: 1.500V
    CPU Referen.…………....0.760V*.......: AUTO (The problem I have set this value AFTER setting CPU Termination at 1.280v and now i´m not sure of the real value of this settiing )
    CPU Reference2………,,0.800V*.......:I don´t Have this setting

    MCH/ICH
    MCH Core…………….....1.100V...........: 1.260V
    MCH Reference….…….0.760V...........; AUTO (The problem I have set this value AFTER setting CPU Termination at 1.280v and now i´m not sure of the real value of this settiing )
    MCH/DRAM Ref.…......0.900V...........: AUTO (The problem I have set this value AFTER setting CPU Termination at 1.280v and now i´m not sure of the real value of this settiing )
    ICH I/O……………….....1.500V............: 1.500V
    ICH Core…………...……1.100V............: 1.100V

    DRAM
    DRAM Voltage ……....1.800V............: 2.080V
    DRAM Termination .…0.900V............: Auto (I don´t have 0.900 value,
    only 0.890 or 0.910 and I set AUTO)
    Channel A Reference 0.900V............: Auto (I don´t have 0.900 value,
    only 0.890 or 0.910 and I set AUTO)
    Channel B Reference 0.900V............: Auto (I don´t have 0.900 value,
    only 0.890 or 0.910 and I set AUTO)

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled] is it ok???
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled]

    Integrated Peripherals
    Legacy USB Storage Detect .............. [Enabled]
    Sata-Raid AHCI Mode ...........: AHCI
    Sata Port0-3 Native Mode ...........: [Enabled]
    GreeLan ..............[Disabled]
    Onboard SATA/IDE Device ...........: [Enabled]
    Onboard SATA/IDE Control Mode ...........: AHCI

    PC HEALTH STATUS
    CPU Warnig Temp................: [Disabled]
    CPU Fan Fail Warning................: [Disabled]
    System Fan2 Fail Warning................: [Disabled]
    Power Fan Fail Warning................: [Disabled]
    System Fan1 Fail Warning................: [Disabled]
    CPU Smart Control............: Auto
    CPU Smart fan Mode...........: Auto

    So i told i have read many things about reference value like tthis post by Lsdmeasap
    <!-- message -->
    XtremeSystems Forums - View Single Post - ** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

    But it is difficult for me and i´m worried if ii have too high voltages.

    Can you help me and give a vulue for this setting and how can i setting them?

    CPU Reference.....0.760............


    MCH Reference.....0.760............

    MCH/DRAM Reference.....0.900......

    Thanks

Page 2 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •