Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: [Help] GA-X58A-UD3R




  1. #11
    Pandu1986 is offline Junior Member
    Join Date
    Apr 2010
    Location
    The World
    Posts
    19

    Default Re: [Help] GA-X58A-UD3R

    Quote Originally Posted by Duradas View Post
    This might be unrelated, but as it is similar to a problem I had with my system, you could check if your issue is caused by the same BIOS settings that I described in this thread:

    http://forums.tweaktown.com/f69/gax5...00/#post350476

    I could install Windows 7 just fine, same as you did with XP, but after I installed more and more device drivers (ATI Catalyst, Intel Storage driver etc.) the PC began rebooting near the end of the windows start up sequence or latest a few seconds or minutes after windows was loaded.

    Somehow that worked, amazingly. I had to keep them both on disabled and it went through the install all the way. One question though, have you updated your bios and after you did were you able to leave them on their stock settings without having that problem?

    Edit: for those of you who couldnt see the video, here is a link that should work : http://www.youtube.com/watch_private...P86GRLdadFBgIQ


    I am thinking about flashing the bios just because leaving them like might hinder my overclocking aspirations later? (Is this true or would it not matter?)
    Last edited by Pandu1986; 04-18-2010 at 04:40 AM.

  2. #12
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: [Help] GA-X58A-UD3R

    if i were you id use the latest beta bios it might let you run with c1e and c3/c6/c7 enabled if not just disable them in bios and wait for a bios fix to fix it heres the latest beta for your board

    http://www.fileden.com/files/2009/12...8aud3r.F6b.zip
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

  3. #13
    Join Date
    Apr 2010
    Location
    Germany
    Posts
    4

    Default Re: [Help] GA-X58A-UD3R

    Quote Originally Posted by Pandu1986 View Post
    One question though, have you updated your bios and after you did were you able to leave them on their stock settings without having that problem?

    I am thinking about flashing the bios just because leaving them like might hinder my overclocking aspirations later? (Is this true or would it not matter?)
    I updated to Bios F5 before installing anything, that was not the problem.

    The different halt states are used to reduce frequency multiplier and voltage for each core inside the CPU when they are not in use. When two or more cores are in a halt state, the Turbo Boost function can raise the frequency multiplier for the remaining working cores above the default value until the TDP for the CPU is reached and this complicated process does seem to cause problems with numerous Core i-X systems. For full use of the Turbo Boost feature, C3 state has to be reached on the idle cores.

    Overclocking the system as a whole should not be affected by problems with the halt states though. But of course, what should happen is often not what will happen, as these reboots should not happen either ;)
    Intel Quad Core i7-960 3.2GHz, Noctua NH-U12p SE2 CPU Cooler
    Gigabyte GA-X58A-UD3R Bios F5, 12GB - 6x2GB DDR3-1333 G.Skill NQ
    Sapphire ATI Radeon HD 5870 1GB
    System 256GB - 2x Supertalent Ultradrive GX 128GB SSD Raid-0 (hdtune 497MB/s read avg, 0.1ms)
    Data 2TB - 2x Samsung Spinpoint F3 7200rpm 1TB Raid-0 (hdtune 227MB/s read avg, 14.6ms)
    Optical LG BH10LS30 Blu-Ray Burner
    Windows 7 Ultimate 64bit
    Coolermaster Midi Tower CM 690-II Advanced, BeQuiet Dark Power Pro P7 850W

  4. #14
    Join Date
    Feb 2010
    Location
    Birmingham,Great Britain
    Posts
    600

    Default Re: [Help] GA-X58A-UD3R

    duradas have you tried the latest beta bios? f6b?? are you using c3 and c1e now?
    Gigabyte ex58-ud5 f12 bios
    Intel i7 920 d0 @3.8ghz 24/7-normal cpu voltage 1.18750v/c1e/turbo/multi threading enabled
    Ocz reaper DDR3 PC3-14400 (1800MHz) 3x2gb (OCZ3RPR1800LV6GK) 8-8-8-24-1t-@1.64v-1.3qpi
    Thermolab Baram cpu cooler
    Dual Boot
    1xsamsung 750gb hard drive-win7 ultimate 64
    1xsamsung 750gb hard drive-windows xp pro 32
    Ati x1950 pro gpu
    Logitech X-530 5.1 Speakers
    1050w psu
    Nzxt lexa case
    http://i40.tinypic.com/2z3w377.jpg <=3.8ghz overclock template

  5. #15
    Join Date
    Apr 2010
    Location
    Germany
    Posts
    4

    Default Re: [Help] GA-X58A-UD3R

    Quote Originally Posted by warren300 View Post
    duradas have you tried the latest beta bios? f6b?? are you using c3 and c1e now?
    Still using bios F5.
    My system rebooted because the default BIOS setting was c1e enabled, but c3,c6,c7 disabled. Both settings together enabled or disabled works for me.

    But for a lot of systems the halt states do not work right, so disabling both is the safer option.

    I got both enabled now and never had a restart anymore.
    I had them disabled while I was installing windows and drivers, though.
    Intel Quad Core i7-960 3.2GHz, Noctua NH-U12p SE2 CPU Cooler
    Gigabyte GA-X58A-UD3R Bios F5, 12GB - 6x2GB DDR3-1333 G.Skill NQ
    Sapphire ATI Radeon HD 5870 1GB
    System 256GB - 2x Supertalent Ultradrive GX 128GB SSD Raid-0 (hdtune 497MB/s read avg, 0.1ms)
    Data 2TB - 2x Samsung Spinpoint F3 7200rpm 1TB Raid-0 (hdtune 227MB/s read avg, 14.6ms)
    Optical LG BH10LS30 Blu-Ray Burner
    Windows 7 Ultimate 64bit
    Coolermaster Midi Tower CM 690-II Advanced, BeQuiet Dark Power Pro P7 850W

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •