Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 4 of 4 FirstFirst ... 234
Results 31 to 34 of 34

Thread: P55-UD4P Random Reboots




  1. #31
    Join Date
    Apr 2010
    Location
    Durban, South Africa
    Posts
    15

    Default Re: P55-UD4P Random Reboots

    Bumped the core voltage up to 1.375. 14hours 52 mins prime95 run 0 errors 0 warnings. So hopefully its sorted now. Will do some further testing over the weekend. Current Settings are:

    Advanced Frequency Settings:

    CPU Clock Ratio 21x

    Advanced Core Features [Press Enter]:

    Intel(R) Turbo Boost Tech................[Disabled]
    CPU Cores Enabled........................[All]
    CPU Multi-Threading......................[Enabled]
    CPU Enhanced Halt (C1E)..................[Disabled]
    C3/C6/C7 State Support...................[Disabled]
    CPU Thermal Monitor......................[Enabled]
    CPU EIST Function........................[Disabled]
    Bi-Directional PROCHOT...................[Enabled]

    QPI Clock Ratio..........................[x36]
    QPI Link Speed........................[6.55GHz]
    Uncore Clock Ratio....................[18x]
    Uncore Frequency.........................3276MHz

    >>>>> Standard Clock Control <<<<<

    Base Clock (BCLK) Control................[Enabled]
    BCLK Frequency ..........................[182]
    Extreme Memory Profile (X.M.P.)..........[Disabled]
    System Memory Multiplier (SPD)...........[8.0]
    Memory Frequency (MHz)................1456
    PCI Express Frequency (MHz)..............[100]
    C.I.A.2..................................[Disabled]

    >>>>> Advanced Clock Control <<<<<

    CPU Clock Drive..........................[ 800mV]
    PCI Express Clock Drive..................[ 900mV]
    CPU Clock Skew...........................[ 0ps]

    Advanced Memory Settings:

    Extreme Memory Profile (X.M.P.)..........[Disabled]
    System Memory Multiplier (SPD)...........[8.0]
    Memory Frequency (MHz)................1456
    Performance Enhance (SPD)............. [Standard]
    DRAM Timing Selectable (SPD)............ [Quick]
    Profile DDR Voltage ..................1.5v
    Profile QPI Voltage ..................1.1v
    Channel Interleaving.....................[Auto]
    Rank Interleaving........................[Auto]

    >>>>> Channel A & B

    Channel A Timing Settings [Press Enter]:
    Cas Latency Time........................[9]
    tRCD....................................[9]
    tRP.....................................[9]
    tRAS...................................[24]

    >>>>> Advanced Timing Control

    tRC....................................[Auto]
    tRRD...................................[Auto]
    tWTR...................................[Auto]
    tWR....................................[Auto]
    tWTP...................................[Auto]
    tWL....................................[Auto]
    tRFC...................................[Auto]
    tRTP...................................[Auto]
    tFAW...................................[Auto]
    Command Rate (CMD).................. 1 [1]

    >>>>> Misc Timing Control

    B2B Cas Delay..........................[Auto]
    Round Trip Latency.....................[Auto]

    Channel A Turnaround Settings [Press Enter]:
    Different DIMMs........................[Auto]
    Different DIMMs........................[Auto]
    On The Same Rank.......................[Auto]

    >>>>> Channel A Writes Followed By Writes

    Different DIMMs........................[Auto]
    Different DIMMs........................[Auto]
    On The Same Rank.......................[Auto]


    Advanced Voltage Settings:

    ******Mother Board Voltage Control ******
    Voltage Types............Normal......Current
    --------------------------------------------

    >>> CPU
    Load Line Calibration...................[Disabled]
    CPU Vcore..................1.19375v..[1.37500v]
    QPI/VTT Voltage..........1.100v.....[1.250v]

    >>> MCH/ICH
    PCH Core....................1.050v.....[1.050v]
    CPU PLL......................1.800v.....[1.800v]

    >>> DRAM
    DRAM Voltage..............1.500v.....[1.660v]
    DRAM Termination.........0.750v.....[Auto]
    Ch-A Data VRef............0.750v.....[Auto]
    Ch-A Data VRef............0.750v.....[Auto]
    Ch-B Data VRef............0.750v.....[Auto]
    Ch-B Data VRef............0.750v.....[Auto]


    Miscellaneous Settings:[/SIZE]

    Isochronous Support....................[Enabled]
    Virtualisation technology..............[Enabled]
    USB Storage Detect ....................[Disabled]

  2. #32
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: P55-UD4P Random Reboots

    Looking good! 14 hours is a good sign that you will make it to 24!

    Let us know how it goes

  3. #33
    Join Date
    Apr 2010
    Location
    Durban, South Africa
    Posts
    15

    Default Re: P55-UD4P Random Reboots

    Had a bit of a hectic weekend, but it gave me a chance to give my pc a 24hour prime95 run, which it passed with 0 errors 0 warnings. Also tested with memtest for 8 hours, 0 errors.

    I'm pretty sure it's all good now. Thanks for all the help guys.

  4. #34
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: P55-UD4P Random Reboots

    Great to hear, sounds stable to me!

    Post back anytime if you need more help or have any questions!

Page 4 of 4 FirstFirst ... 234

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •