Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: help me please




  1. #1
    Join Date
    Nov 2009
    Location
    israel
    Posts
    262

    Default help me please

    hey guys iam beggener in overclock i need to know how to overclock I5 and all of his voltages and what is the recommanded voltages and timings setting according to the speed of cpu and memory ->CPU for example "cpu speed between x-y the cpu pll must be between x-y" Features
    PPM : Enabled
    EIST : Disabled
    CxE : Disabled
    Execute Disable Bit : Disabled
    Virtualization : Disabled
    Hyper Threading : Enabled
    Active Processor Cores : All
    Memory Settings
    Memory Controller Settings
    IMC Configuration : Enabled
    Channel Configuration : Independent
    Channel Interleaving : 6 way
    Rank Interleaving : 4 way
    Memory Timings
    Extreme Memory Profile XMP : Enabled
    Memory Profile Select : Auto
    DRAM Timing Control : By SPD
    tCL (CAS Latency) :
    tRCG (RAS to CAS Delay) :
    tRP (RAS Precharge) :
    tRAS (Precharge Delay) :
    CR (Command Rate) :
    tRFC (Refresh Cycle Time) :
    tWR (Write Recovery Time) :
    tWTR (Write to Read Delay) :
    tRRD (RAS to RAS Delay) :
    tRTP (Read to Precharge) :
    All Voltage Settings
    CPU Voltages
    CPU Core Voltage : +60mv
    CPU Target Core Voltage : 1.235
    CPU Vdroop Compensation : Enabled
    CPU VTT (UnCore) Voltage : +80mv
    1.8 PPL Voltage Setting : 1.8v
    CPU Clock Amplitude Ctrl : 0.800v
    Memory Voltages
    DRAM Voltage : 1.65v
    DIMM1 Vref CA (Addresses) : .500
    DIMM1 Vref DQ (Data) : .500
    DIMM2 Vref CA (Addresses) : .500
    DIMM2 Vref DQ (Data) : .500
    DIMM3 Vref CA (Addresses) : .500
    DIMM3 Vref DQ (Data) : .500
    Chipset Voltages
    X58 IOH Core Voltage : 1.20v
    X58 IOH VCCA 1.1V : 1.125v
    X58 IOH VCCA 1.5V : 1.506v
    ICH10 SB Voltage : 1.530v
    OC Gear : Skipping this part
    CPU Turbo : Enabled
    System Turbo : Enabled
    Clock Speed Control Center
    CPU Bclock (FSB) : 200
    QPI Link Fast Mode : Enabled
    QPI Multiplier : x18
    QPI Target Speed : 3605Mhz
    CPU Core Multiplier : x16
    CPU Core Target Speed : 3205Mhz
    CPU Uncore Multiplier : x16
    CPU Uncore Target Speed : 3205Mhz
    Memory Bus Multiplier : x8
    Memory Bus Target Speed : 1604Mhz
    CPU Clock Skew : 0ps
    IOH Clock Skew : 0ps
    Last edited by gasan; 04-19-2010 at 06:11 PM.

  2. #2
    Join Date
    Nov 2009
    Location
    israel
    Posts
    262

    Default Re: help me please

    can some one guide me i need to learn how to adjust these settings to make every thing stable after test cinebench , prime 95 ..........

  3. #3
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: help me please

    What board is this? Sorry, we really only know how to help with Gigabyte boards here as that is what most of us use.

    We could try to help, but some of our thoughts would have to be guessing.

    Disable XMP for starters and set the memory up yourself. What QPI/Vtt voltage is that amount (+80mv)?

  4. #4
    Join Date
    Nov 2009
    Location
    israel
    Posts
    262

    Default Re: help me please

    yes in general its gigabyte motherboards
    what i need to know is how to adjust all voltages for chipset and cpu and memory Mediations (give me the recommanded and the risk condetions) for example qpi voltage must be " " if cpu speed between " " something like this
    i need a knowloge in general i dont want for specific board because some boards for example have Limited settings so tell me the mediations for gigabyte settings acording to cpu or memory speed i appreciate if you help me !!!!!!!!!

  5. #5
    Join Date
    Nov 2009
    Location
    Somewhere
    Posts
    300

    Default Re: help me please

    errmm, so back to the question, which motherboard is this? Make, Model, Firmware Version?
    GA-X58A-UD7 rev1.0 - F9d // Intel i7 920 D0 @ 4.2Ghz - //vcore:Normal(1.2430v)+DVID+0.07500v//qpi_vtt:1.380v//bclk:200*21(turbo)
    6GB Corsair Dominator 1866 @ 1600 (9-9-9-24-2T@1.65v)


    CPU-Z Results: http://valid.canardpc.com/show_oc.php?id=2212669



  6. #6
    Join Date
    Nov 2009
    Location
    israel
    Posts
    262

    Default Re: help me please

    gigabyte x58 ud7 i920

  7. #7
    Join Date
    Nov 2009
    Location
    Somewhere
    Posts
    300

    Default Re: help me please

    are you on air or water cooling?

    on stock clocking, what CPU/NB temps are you seeing when using Prime95 or IntelBurnTest?

    you can use HWmonitor to get temps or CoreTemp or RealTemp or anything you like really.

    just need to establish your running temps before you start to Overclock.. if you're on a stock Intel cooler then you'll go more China Syndrome than Chuck Yeager.
    GA-X58A-UD7 rev1.0 - F9d // Intel i7 920 D0 @ 4.2Ghz - //vcore:Normal(1.2430v)+DVID+0.07500v//qpi_vtt:1.380v//bclk:200*21(turbo)
    6GB Corsair Dominator 1866 @ 1600 (9-9-9-24-2T@1.65v)


    CPU-Z Results: http://valid.canardpc.com/show_oc.php?id=2212669



  8. #8
    Join Date
    Nov 2009
    Location
    israel
    Posts
    262

    Default Re: help me please

    iam start frm the beganing without overclock now i need from you to guide me from the beganing "iam using good air colling "

  9. #9
    Join Date
    Nov 2009
    Location
    israel
    Posts
    262

    Default Re: help me please

    cpu at 30celcius and nb 40/41celciues

  10. #10
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: help me please

    its pretty much the same as i5 setup,just set your cpu, qpi/vtt,dram voltages manually,theres a 3.8ghz guide in my sig if you want to try that,
    cpu voltage for 3.8ghz can be anything from normal setting to 1.25000v,qpi/vtt can be from 1.30000 to 1.360000 maybe more but no higher than 1.4v for 3.8ghz,dram voltage is usually 1.66 in bios,set all your ram timings according to your ram,all other voltages can be left on auto
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •