Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 4 of 8 FirstFirst ... 23456 ... LastLast
Results 31 to 40 of 78

Thread: BSoD's with P55M-UD2 and Corsair TW3X4G1333C9DHX




  1. #31
    Join Date
    Nov 2009
    Location
    israel
    Posts
    262

    Default Re: BSoD's with P55M-UD2 and Corsair TW3X4G1333C9DHX

    did you overclock your system and what is your bluescreen ??? or mybe test each memory on memtest and see if you have errors or update latest bios

  2. #32
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  3. #33
    Join Date
    Apr 2010
    Location
    United Kingdom
    Posts
    37

    Default Re: BSoD's with P55M-UD2 and Corsair TW3X4G1333C9DHX

    Hello folks, here is my update:

    Yesterday I received my system back from Scan who could find no faults but did however re-apply thermal paste to my CPU cooler. I set the system up yesterday and was running for a good 5 hours before I shut down and went to bed.

    This morning, I booted up and logged into Windows. I went in the shower and by the time I came back, it was sitting on the login screen following a BSoD. When I logged in, it didn't make it into Windows before I got another blue screen. I managed to get in on the next attempt but that lasted about half an hour before another one got me. Still none the wiser, only now I have been told that I have a system which isn't faulty but yet is giving me faults.

    I am considering just buying a(nother) brand new system, this is ridiculous.

    Cheers,

    Ian

  4. #34
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: BSoD's with P55M-UD2 and Corsair TW3X4G1333C9DHX

    If you would like advised settings from me let me know and give me your current ones in a template.

    I think this is all settings or it could be a compatibility issue with the memory as well.

  5. #35
    Join Date
    Apr 2010
    Location
    United Kingdom
    Posts
    37

    Default Re: BSoD's with P55M-UD2 and Corsair TW3X4G1333C9DHX

    Thanks lsd, much appreciated as always. Attached are my settings from the BIOS.

    Cheers,

    Ian

  6. #36
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: BSoD's with P55M-UD2 and Corsair TW3X4G1333C9DHX

    Try these

    Advanced Frequency Settings:

    CPU Clock Ratio 20x

    Advanced Core Features [Press Enter]:

    Intel(R) Turbo Boost Tech................[Auto]
    CPU Cores Enabled........................[All]
    CPU Multi-Threading......................[Disabled] (I can't see this anywhere)
    CPU Enhanced Halt (C1E)..................[Auto]
    C3/C6/C7 State Support...................[Auto]
    CPU Thermal Monitor......................[Auto]
    CPU EIST Function........................[Auto]
    Bi-Directional PROCHOT...................[Auto]

    QPI Clock Ratio..........................[Auto]
    QPI Link Speed...........................[4.8GHz]
    Uncore Clock Ratio.......................[16x]
    Uncore Frequency.........................2133MHz

    >>>>> Standard Clock Control <<<<<

    Base Clock (BCLK) Control................[Disabled]
    BCLK Frequency ..........................[133]
    Extreme Memory Profile (X.M.P.)..........[Disabled] (I can't see this anywhere)
    System Memory Multiplier (SPD)...........[Auto] << Set manually 10
    Memory Frequency (MHz)...................1333
    PCI Express Frequency (MHz)..............[Auto]
    C.I.A.2..................................[Disabled]

    >>>>> Advanced Clock Control <<<<<

    CPU Clock Drive..........................[ 800mV]
    PCI Express Clock Drive..................[ 900mV]
    CPU Clock Skew...........................[ 0ps]

    Advanced Memory Settings:

    Extreme Memory Profile (X.M.P.)..........[Disabled] (I can't see this anywhere)
    System Memory Multiplier (SPD)...........[Auto] << Set manually 10
    Memory Frequency (MHz)...................1333
    Performance Enhance (SPD)..............[Turbo] << Try standard, or Extreme may be best
    DRAM Timing Selectable (SPD)............ [Expert]
    Profile DDR Voltage .....................1.5V
    Profile QPI Voltage .....................1.1V
    Channel Interleaving.....................6 [Auto]
    Rank Interleaving........................4 [Auto]

    >>>>> Channel A & B

    Channel A Timing Settings [Press Enter]:
    Cas Latency Time........................9 [9] All timings changed from Auto.
    tRCD....................................9 [9]
    tRP.....................................9 [9]
    tRAS...................................24 [24]

    >>>>> Advanced Timing Control

    tRC....................................34 [Auto]
    tRRD....................................5 [Auto]
    tWTR....................................5 [Auto]
    tWR....................................10 [Auto]
    tWTP...................................21 [Auto]
    tWL.....................................7 [Auto]
    tRFC...................................74 [Auto] << Set 78 manually
    tRTP....................................5 [Auto]
    tFAW...................................25 [Auto]
    Command Rate (CMD)......................1 [Auto] << Set 1T, 2T would be better for compatibility but kill performance

    >>>>> Misc Timing Control

    B2B Cas Delay...........................- [Auto]
    Round Trip Latency.....................46 [Auto] For some reason, Channel B lists 48 [Auto] here. << That is normal, leave in auto

    Channel A Turnaround Settings [Press Enter]:
    Different DIMMs.........................6 [Auto]
    Different DIMMs.........................5 [Auto]
    On The Same Rank........................1 [Auto]

    >>>>> Channel A Writes Followed By Writes

    Different DIMMs.........................6 [Auto]
    Different DIMMs.........................6 [Auto]
    On The Same Rank........................1 [Auto]


    Advanced Voltage Settings:

    ******Mother Board Voltage Control ******
    Voltage Types............Normal......Current
    --------------------------------------------

    >>> CPU
    Load Line Calibration................... [Auto]
    CPU Vcore.......................1.16250v [Normal]
    QPI/VTT Voltage...................1.100v [Normal] << Set 1.2-1.3

    >>> MCH/ICH
    PCH Core..........................1.050v [Auto] << Try 1.1
    CPU PLL...........................1.800v [Auto]

    >>> DRAM
    DRAM Voltage......................1.500v [Normal] << Set 1.62-1.66
    DRAM Termination..................0.750v [Auto]
    Ch-A Data VRef....................0.750v [Auto]
    Ch-A Data VRef....................0.750v [Auto]
    Ch-B Data VRef....................0.750v [Auto]
    Ch-B Data VRef....................0.750v [Auto]


    Miscellaneous Settings:[/SIZE]

    Isochronous Support....................[Enabled]
    Virtualisation technology..............[Enabled]
    USB Storage Detect ....................[Enabled] Located In Integrated Peripherals Page (Mine is listed as USB Storage Function

  7. #37
    Join Date
    Apr 2010
    Location
    United Kingdom
    Posts
    37

    Default Re: BSoD's with P55M-UD2 and Corsair TW3X4G1333C9DHX

    Thanks lsd, I changed the settings as you said and have just logged in to Windows. I will let you know how this goes.

  8. #38
    Join Date
    Apr 2010
    Location
    United Kingdom
    Posts
    37

    Default Re: BSoD's with P55M-UD2 and Corsair TW3X4G1333C9DHX

    Hey, just blue screened again after nearly 3 hours. I wish it wasn't so random, I just can't pin it down to anything.

    Cheers,

    Ian

  9. #39
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: BSoD's with P55M-UD2 and Corsair TW3X4G1333C9DHX

    if scan tested it and they didnt find any faults,maybe it could be your psu or ram???? as they would use different brands to test with,could you borrow another psu to try with? or exchange your ram for another brand/batch??
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  10. #40
    Join Date
    Apr 2010
    Location
    United Kingdom
    Posts
    37

    Default Re: BSoD's with P55M-UD2 and Corsair TW3X4G1333C9DHX

    They tested the motherboard, the RAM and the hard drive and found no faults. I suppose the PSU and the graphics card are the only things that could be failing but none of the blue screens mention the graphics card and I only bought the PSU a year and a half ago.

    Cheers,

    Ian

Page 4 of 8 FirstFirst ... 23456 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •