Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: Can't setup a RAID 0 array on a GA-890GPA-UD3H




  1. #11
    Join Date
    Aug 2010
    Location
    New Zealand
    Posts
    5

    Default Re: Can't setup a RAID 0 array on a GA-890GPA-UD3H

    I have put in the two non-SSD drives that I got from work and they work perfectly. I also noticed that it sees them straight away, i.e. I have to press Ctrl-F immediately after the POST. With my Intel-SSD I first see a line of dots across the screen (taking about a minute) before I get to press Ctrl-F.

    So it's not the board! I'm hoping to borrow a couple of different brand SSDs from a friend. If these work then it is simply a compatibility issue between this board and my Intel SSDs. If they don't work, then the board may have an issue with all SSDs.

    Watch this space.
    Joe :-)

  2. #12
    Join Date
    Aug 2010
    Location
    New Zealand
    Posts
    5

    Default Re: Can't setup a RAID 0 array on a GA-890GPA-UD3H

    In the end, I gave up and took it back to the shop. The technician there installed a new mother board and two new SSDs but this did not fix the problem. I ended up leaving it there. Eventually it did get fixed, however it's unclear as to what was actually done. When I collectd it, I asked the technician that was on duty that day what he did to it to get it working. He went through what he did in the BIOS and it's not obvious to me what he did different to what I had done myself. The only thing I had not done was to select 'Load fail safe defaults". I had selected "Load optimised defaults". It's either that or there is something he's not telling me. Either way, it's working now and I'm very happy with the performance. Thanks for your help along this journey. Regards, Joe.

  3. #13
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Can't setup a RAID 0 array on a GA-890GPA-UD3H

    Hmm, well it's nice to hear you got it working finally!

    Save the profile now and try it again with optimized defaults, maybe he switched boards out?

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •