Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 38

Thread: Marvell Raid 0 is not working!




  1. #21
    Join Date
    Feb 2010
    Location
    USA
    Posts
    133

    Default Re: Marvell Raid 0 is not working!

    64bit and same version.

  2. #22
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  3. #23
    Join Date
    Feb 2010
    Location
    USA
    Posts
    133

    Default Re: Marvell Raid 0 is not working!

    Nope, still lower than speeds from ATTO and HD Tune.

    Interesting article to read and it says Crystal Mark is not accurate in testing these two drives in RAID0......

    Western Digital VelociRaptors in RAID - SSD Alternative? | StorageReview.com

    Anyway, thinking of getting another one to expand the RAID0! Sure it will read 300'ish Mb/s .....if I find another super deal.....
    Last edited by jojodancer; 05-27-2010 at 03:29 AM.

  4. #24
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  5. #25
    Join Date
    Feb 2010
    Location
    USA
    Posts
    133

    Default Re: Marvell Raid 0 is not working!

    that would be up to 500mb/s

    let me if I could find another VelociRaptor 600gb around 200 bucks first...

  6. #26
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  7. #27
    Join Date
    Feb 2010
    Location
    USA
    Posts
    133

    Default Re: Marvell Raid 0 is not working!

    Yes, I have decided to replace my VelociRaptors with SSDs!!!!

    Just ordered three OCZ Vertex2 60gb for RAID 0

    Anything that I should know of for the fresh win 7 OS installation/ adjustment/ trim/ brah brah.....
    i7 870 (4.08GHz) / Crosair H70
    4 x 2GB G. Skill DDR3 2200MHz CL7-10-10-26
    Gigabyte P55A-UD6
    2 x MSI HD5870 Lightning II
    4 x OCZ Vertex2 60GB in RAID 0 (OS)
    1 x VelociRaptor SATA3 6GB/s 600GB (games)
    1 x WD BLACK SATA2 2TB (storage)
    Crosair AX1200 power
    LG 8X Blu Ray rewriter
    Plextor 24X DVD rewriter
    Lian Li PC-60FNW
    Lamptron TOUCH fan controller / Noiseblocker PK-3 / 2 x Xigmatek CLF-F1454

  8. #28
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Marvell Raid 0 is not working!

    Ohh wow, nice!

    Which models?

    No TRIM with RAID, I would manually align the array though and not let windows 7 do it.

    Here is how to align


    Diskpart commands to align and create a partition

    Diskpart >List Disk

    (Here note the Disk # you want to align and create on based on size of drive, if only one drive then you are fine disk 0 will be the one you
    need)

    Diskpart > Select Disk 0
    (Or other disk number if need be)

    Diskpart > List Partition
    (Just to ensure you have the correct disk listed and no partitions are found)

    Diskpart > Create Partition Primary Align=1024
    (To create and align your partition)

    Diskpart> Format Quick FS+NTFS
    (To Quick format-NTFS)

    Diskpart > List Partition
    (To check partition was created properly and aligned)

    Diskpart > Active
    (To set partition Active for OS Install)

    Diskpart > Exit

    Done!

    Clean and simple for those who have only one disk connected and need no explainations


    Diskpart > Select Disk 0
    Diskpart > Create Partition Primary Align=1024
    Diskpart> Format Quick FS+NTFS (Can be combined with above)
    Diskpart > List Partition
    Diskpart > Active
    Diskpart > Exit

  9. #29
    Join Date
    Feb 2010
    Location
    USA
    Posts
    133

    Default Re: Marvell Raid 0 is not working!

    Thanks for the tips and I am getting three OCZ Vertex 2 60GB models.

    I am still a very newbie in SSD and the instruction that you have given are for Pre or After OS installation?

    Where can I find the Diskpart ???
    i7 870 (4.08GHz) / Crosair H70
    4 x 2GB G. Skill DDR3 2200MHz CL7-10-10-26
    Gigabyte P55A-UD6
    2 x MSI HD5870 Lightning II
    4 x OCZ Vertex2 60GB in RAID 0 (OS)
    1 x VelociRaptor SATA3 6GB/s 600GB (games)
    1 x WD BLACK SATA2 2TB (storage)
    Crosair AX1200 power
    LG 8X Blu Ray rewriter
    Plextor 24X DVD rewriter
    Lian Li PC-60FNW
    Lamptron TOUCH fan controller / Noiseblocker PK-3 / 2 x Xigmatek CLF-F1454

  10. #30
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Marvell Raid 0 is not working!

    Those are for Pre-OS install, diskpart if on your windows 7 install disk sorry I thought I mentioned that.

    Start the install CD, choose repair, then advanced options, then command prompt. And then from there you use the above instructions.

Page 3 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •