Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 28

Thread: S3(STR) Sleep Wakeup problem with GA-X58A-UD7




  1. #11
    Join Date
    May 2010
    Location
    Norway
    Posts
    8

    Default Re: S3(STR) Sleep Wakeup problem with GA-X58A-UD7

    Alright, so now I've settled at the following BIOS settings:

    Code:
    Advanced CPU Features:
    CPU Clock Ratio ............................ [21x] (2.66GHz, 127x21)
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled .......................... [All]
    CPU Multi Threading ........................ [Enabled]
    CPU Enhanced Halt (C1E) .................... [Disabled] Tested with this on
    C3/C6/C7 State Support ..................... [Disabled] Tested with this on
    CPU Thermal Monitor ........................ [Enabled] Tested with this off
    CPU EIST Function .......................... [Disabled] Tested with this on
    Virtualization Technology .................. [Disabled]
    Bi-Directional PROCHOT ..................... [Enabled] Tested with this off
     
    Uncore & QPI Features:
    QPI Link Speed ............................. [x36] (4.57GHz)
    Uncore Frequency ........................... [x26] (3302MHz) Also tested at x25
    Isonchronous Frequency ..................... [Enabled]
     
    Standard Clock Control:
    Base Clock (BCLK) Control .................. [Enabled]
    BCLK Frequency (MHz) ....................... [127]
    PCI Express Frequency (MHz) ................ [100]
     
    Advanced Clock Control:
    CPU Clock Drive ............................ [800mV]
    PCI Express Clock Drive .................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]
     
    Advanced DRAM Features:
    Performance Enhance ........................ [Standard]
    Extreme Memory Profile (X.M.P) ............. [Disabled]
    System Memory Multiplier (SPD) ............. [12.0] (1524MHz, 127x12)
    DRAM Timing Selectable (SPD) ............... [Quick]
    Channel A + B + C
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ........................... [8]
    tRCD ....................................... [8]
    tRP ........................................ [8]
    tRAS ....................................... [24]
    Command Rate (CMD) ......................... [1] Tested with this on 2
    Everything else left on auto for DRAM settings.
     
    Advanced Voltage Control:
    CPU
    Load Line Calibration ...................... [Standard]
    CPU Vcore .................................. [1.29375V] Tested with this on auto
    QPI/VTT Voltage 1.150v ..................... [1.320V] Tested with this at 1.150V
    CPU PLL 1.800v ............................. [1.800V] Tested with this on auto
    MCH/ICH
    PCIE 1.500v ................................ [Auto]
    QPI PLL 1.100v ............................. [Auto]
    IOH Core 1.100v ............................ [1.100V] Tested with this on auto
    ICH I/O 1.500v ............................. [Auto]
    ICH Core 1.1v .............................. [Auto]
    DRAM
    DRAM Voltage 1.500v ........................ [1.660V] Tested with this on 1.500V
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]
    I blend tested the above with Prime95 (only except for XMP which was still on profile1 instead of disabled, but the dram settings were still the same), and it ran for 9hours+ with round off checking enabled. No errors or anything.

    However, shortly after the 9 hours of prime, I was playing around in my BIOS, and suddenly the pc rebooted. Rebooted it myself once more and went into BIOS again, just to find the same thing happen a second time around. I then switched off my machine and gave it a few minutes of rest, and I've had no further reboots this far. This incident made me question my PSU. It's 3-4 years old and rated at 600w. Could it be that the addition of the power hungry 5970 gpu, has caused some level of PSU related instabillity? Although I'm surprised since I've yet to experience any signs of weakness during gaming and stress testing. Any thoughts?

    Well anyway... instead of running 12-24 hours of prime with these settings, I would very much like to attempt a moderate overclock like you suggested Lsdmeasap. From what I understand so far, sleep should in theory be equally stable in an overclocked state, as long as the oc itself is sufficiently stable, right?

    Lets say in the ballpark of 3.2 to 3.6 GHz, or even more as long as voltages and temperatures are kept within what is considered to be safe bounds.

    I'm currently equipped with the CoolIT Domino ALC CPU cooler, and are getting around 70c max core load temperatures in a prime95 blend test with the Domino at it's quietest setting. tCase around 55c at max load and MCH temp at just above 60c. All temperatures read by coretemp and confirmed by everest. I'm sure I could lower the temps more by minimizing and re-testing vcore, but I'd like to start doing that at a more suitable bclk level.

    Do you have any recommendations for a safe place to start with regards to BIOS settings for such an overclock?

  2. #12
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: S3(STR) Sleep Wakeup problem with GA-X58A-UD7

    you could try with a 172x21 or 170x21,set cpu voltage on normal setting,dram on 1.66 in bios and qpi/vtt 1.30000,set all ram timings manually according to your ram and use 1T command rate.start from there and see if its any good,set your uncore freq to twice what your ram multiplier is then add one to it
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  3. #13
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: S3(STR) Sleep Wakeup problem with GA-X58A-UD7

    Do not use XMP please! This ignores your settings and can overvolt things, or ignore your voltage settings, please set yourself.

    600W PSU is not good for X58, and a older one adds to that, plus having a 5970 really adds to that! So this may be a huge part of your problems, possibly.

    Yes sleep works fine overclocked as long as you are stable, didn't you see the sleep/resume images I posted on page one, those are at 4.2Ghz

    Try this for 3.36Ghz, you may need to turn your cooler fan up, or whatever you do to take it off low.

    You will of course need to tinker around a bit until you find your own stable Vcore, uncore, and QPI/Vtt settings.

    Advanced CPU Features:
    CPU Clock Ratio ............................ [21x] 3.36Ghz (21x160)
    Intel(R) Turbo Boost Tech .................. [Enabled] << Disabled, set 21 above. Or leave enabled and set 20 above
    CPU Cores Enabled .......................... [All]
    CPU Multi Threading ........................ [Enabled]
    CPU Enhanced Halt (C1E) .................... [Disabled] Tested with this on << Disabled
    C3/C6/C7 State Support ..................... [Disabled] Tested with this on << Disabled
    CPU Thermal Monitor ........................ [Enabled] Tested with this off << Enabled always
    CPU EIST Function .......................... [Disabled] Tested with this on << Disabled
    Virtualization Technology .................. [Disabled] << Disabled if you do not need
    Bi-Directional PROCHOT ..................... [Enabled]

    Uncore & QPI Features:
    QPI Link Speed ............................. [x36] << manually set x36 or x44 (Set 36 first, x44 may be best for stability and performance though, so you might want to use that right off the bat. I always keep mine as high as I can at any overclock. You only need to keep this under 8GT/s
    Uncore Frequency ........................... [x20] << manually set 20-22 (Higher is better, but may need a little bit more QPI/Vtt voltage)
    Isonchronous Frequency ..................... [Enabled]

    Standard Clock Control:
    Base Clock (BCLK) Control .................. [Enabled]
    BCLK Frequency (MHz) ....................... [160]
    PCI Express Frequency (MHz) ................ [100]

    Advanced Clock Control:
    CPU Clock Drive ............................ [800mV]
    PCI Express Clock Drive .................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]

    Advanced DRAM Features:
    Performance Enhance ........................ [Standard]
    Extreme Memory Profile (X.M.P) ............. [Disabled]
    System Memory Multiplier (SPD) ............. [10.0] = 1600Mhz
    DRAM Timing Selectable (SPD) ............... [Quick] << Set Expert, then set each channel main timings one by one

    Channel A + B + C
    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ........................... [8]
    tRCD ....................................... [8]
    tRP ........................................ [8]
    tRAS ....................................... [24]
    Command Rate (CMD) ......................... [1] << Set 1T

    Advanced Voltage Control:
    CPU
    Load Line Calibration ...................... [Standard] << Enabled - Level 1
    CPU Vcore .................................. [1.29375V] << Set 1.28-1.36 should be plenty for 3.4 overclock
    QPI/VTT Voltage 1.150v ..................... [1.320V] << Set 1.24-1.4 (May need upper end of this depending on all other settings chosen, and your CPU itself and memory itself)
    CPU PLL 1.800v ............................. [1.800V] << Set 1.8

    MCH/ICH
    PCIE 1.500v ................................ [Auto]
    QPI PLL 1.100v ............................. [Auto] << Try 1.2, or leave at Auto
    IOH Core 1.100v ............................ [1.100V] Auto may be fine here, or you can try using 1.14 or so
    ICH I/O 1.500v ............................. [Auto]
    ICH Core 1.1v .............................. [Auto]

    DRAM
    DRAM Voltage 1.500v ........................ [1.660V] << Set 1.66
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]

  4. #14
    Join Date
    May 2010
    Location
    Norway
    Posts
    8

    Default Re: S3(STR) Sleep Wakeup problem with GA-X58A-UD7

    It took a few weeks, but yesterday I finally got myself a new psu, the Corsair HX1000. Swapped out my old MIST 600, and guess what.. s3 sleep now resumes perfectly! :D

    Check out this thread for more detailed posts on the same issue:
    http://forums.tweaktown.com/f69/ga-m...3-state-39628/

    Problem solved, thank you all! :D

  5. #15
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  6. #16
    Join Date
    Dec 2013
    Location
    think
    Posts
    4

    Default Re: S3(STR) Sleep Wakeup problem with GA-X58A-UD7

    Quote Originally Posted by Lsdmeasap View Post
    Nice to hear this is solved for you now!!

    Hi and sorry to necro this old thread, but I just ran into the same S3 resume issue on a Gigabyte ex58-ud5 board. Tried all possible thing to no avail, until I saw this topic.

    In your previous reply you hinted
    "600W PSU is not good for X58" - care to elaborate on that? I have a 500W brand new PSU but the system barely draws 150W out of it, at wall. How is that not enough for this board?

    And to the previous poster:

    "It took a few weeks, but yesterday I finally got myself a new psu, the Corsair HX1000. Swapped out my old MIST 600, and guess what.. s3 sleep now resumes perfectly! :D

    Check out this thread for more detailed posts on the same issue:
    http://forums.tweaktown.com/f69/ga-m...3-state-39628/

    Problem solved, thank you all! :D"
    The above link no longer works so I have no idea what exactly it was that helped you, besides swapping a working 600W PSU for a working 1000W one?

    Thanks guys!

  7. #17
    Join Date
    Nov 2012
    Location
    USA
    Posts
    2,675

    Default Re: S3(STR) Sleep Wakeup problem with GA-X58A-UD7

    Quote Originally Posted by globalist View Post
    The above link no longer works so I have no idea what exactly it was that helped you, besides swapping a working 600W PSU for a working 1000W one?
    Here ya go. This one works:
    http://forums.tweaktown.com/gigabyte...-s3-state.html
    #1 - Please, when seeking help, enter the make and model of ALL parts that your system is comprised of in your Signature, or at least the model #'s in your System Specs, then "Save' it.
    ____If you are overclocking, underclocking, or undervolting any parts, informing us of this and their values would prove beneficial in helping you.

    #2 - G.Skill RAM Configurator for your boardSamsung Memory for your boardLatest AMD Chipset Drivers/WindowsLatest AMD Graphics Drivers/WindowsLatest Intel Drivers

    #3 - Please use the eXtreme Outer Vision Power Supply Calculator found HERE to determine if it might be your PSU at issue.
    ____Consider your PSU to be the foundation from which all else is built upon. Anything built upon a weak foundation is poorly built.

  8. #18
    Join Date
    Dec 2013
    Location
    think
    Posts
    4

    Default Re: S3(STR) Sleep Wakeup problem with GA-X58A-UD7

    Quote Originally Posted by - wardog - View Post
    OK thanks! Is this really indicating there could be just not enough amperage on the +5V line of my brand new OCZ CoreXStream 500W PSU?

    It is rated as follows:

    +3,3 V: 24 A
    +5 V: 15 A
    +12 V: 25 A V1/20 A V2
    -12 V: 0,3 A
    +5 VSB: 2,5 A

  9. #19
    Join Date
    Nov 2012
    Location
    USA
    Posts
    2,675

    Default Re: S3(STR) Sleep Wakeup problem with GA-X58A-UD7

    Quote Originally Posted by globalist View Post
    Is this really indicating there could be just not enough amperage on the +5V line of my brand new OCZ CoreXStream 500W PSU?
    So we know what your system is made up of please read and follow #1 in my sig below.
    #1 - Please, when seeking help, enter the make and model of ALL parts that your system is comprised of in your Signature, or at least the model #'s in your System Specs, then "Save' it.
    ____If you are overclocking, underclocking, or undervolting any parts, informing us of this and their values would prove beneficial in helping you.

    #2 - G.Skill RAM Configurator for your boardSamsung Memory for your boardLatest AMD Chipset Drivers/WindowsLatest AMD Graphics Drivers/WindowsLatest Intel Drivers

    #3 - Please use the eXtreme Outer Vision Power Supply Calculator found HERE to determine if it might be your PSU at issue.
    ____Consider your PSU to be the foundation from which all else is built upon. Anything built upon a weak foundation is poorly built.

  10. #20
    Join Date
    Dec 2013
    Location
    think
    Posts
    4

    Default Re: S3(STR) Sleep Wakeup problem with GA-X58A-UD7

    mobo: Gigabyte GA-EX58-UD5
    CPU: i7 at stock speeds
    RAM: 4x2GB OCZ DDR3
    PSU: 500W OCZ CorexSTream 500W
    VGA: Radeon HD4850
    HDD: 1TB WD Green

Page 2 of 3 FirstFirst 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •